| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-H40G-CU50CM | |
| 2 | Arista Networks | CAB-Q-Q-0.5M | |
| 3 | Juniper | EX-QSFP-40GE-DAC-50CM | |
| 4 | Brocade | 40G-QSFP-C-00501 | |
| 5 | Dell | 332-1362 | |
| 6 | Intel | XLDACBL05 | |
| 7 | NVIDIA/Mellanox | MC2206130-00A |
| Cisco Compatible |
QSFP-H40G-CU50CM
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP+ to QSFP+ | Max Data Rate | 40Gbps |
| Cable Length | 0.5m (1.6ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | SFF-8436, QSFP+ MSA and IEEE 802.3ba |
| Minimum Bend Radius | 35mm | Application | 40G InfiniBand 8x DDR, 4x QDR, 10/40 Gigabit Ethernet, Fibre Channel |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP+ port must enable 40GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard QSFP+ 40G ports; cannot be inserted into SFP+ or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 40G QSFP+ passive copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.





Q1: Can this Cisco compatible 40g qsfp+ dac cable run full 40G rate stably on Cisco Nexus NX-OS? A: Yes, this HYTOPTODEVICE 40g qsfp+ dac cable supports full 40Gbps line rate. It is pre-programmed with Cisco EEPROM and validated on NX-OS for reliable 40GBASE-CR4 links.
Q2: What is the maximum reliable transmission distance for a passive 40g qsfp+ dac cable? A: The rated maximum reach for passive QSFP+ 40g qsfp+ dac cable is 5-7 meters. This 0.5M variant is built for ultra-short rack internal connections.
Q3: Can this QSFP+ to QSFP+ 40g qsfp+ dac cable connect Cisco Nexus switches to Arista 40G leaf switches? A: Cross-brand interconnection works reliably with unified 40GBASE-CR4 and matching FEC settings. This 40g qsfp+ dac cable follows MSA standards for multi-vendor leaf-spine fabrics.
Q4: What is the core difference between a 40g qsfp+ dac cable and 25G SFP28 DAC cable? A: A 40g qsfp+ dac cable delivers 40G aggregate bandwidth over four lanes, while SFP28 DAC only runs 25G single-lane. It suits legacy 40G data center migration deployments.
Q5: What happens if a passive 40g qsfp+ dac cable exceeds its 7-meter limit? A: 40G high-speed copper suffers severe signal attenuation past 7 meters. Longer lengths bring CRC errors and unstable links; select active DAC or AOC fiber for longer runs.
Q6: Which Cisco data center workloads get the biggest latency benefit from this 40g qsfp+ dac cable? A: VM migration, distributed storage and low-latency HPC traffic benefit most. This HYTOPTODEVICE 40g qsfp+ dac cable maintains consistent ultra-low latency.
Q7: Can this 0.5M QSFP+ to QSFP+ 40g qsfp+ dac cable link two UCS server adapters point to point? A: Direct server NIC-to-NIC interconnection is fully supported with proper port configuration. This 40g qsfp+ dac cable works great for local node sync inside compact racks.
Q8: How does AWG wire gauge impact signal performance of a short 40g qsfp+ dac cable? A: 30AWG provides flexible routing and stable signal for 0.5M short runs; thicker 24AWG is reserved for 3–5M longer passive DAC. This cable uses 30AWG twinax for dense rack wiring.
Q9: Will NX-OS firmware upgrades affect switch identification of this 40g qsfp+ dac cable? A: MSA-compliant 40g qsfp+ dac cable keeps compatibility across mainstream NX-OS releases. Preloaded Cisco EEPROM ensures reliable identification after firmware updates.
Q10: When should I choose AOC fiber instead of a 40g qsfp+ dac cable for Cisco fabrics? A: Choose active optical cables for cross-rack links or distances over 5 meters. A 40g qsfp+ dac cable is zero-power and low-cost for intra-rack short 40G connections.
Q11: What latency reduction can a 40g qsfp+ dac cable deliver compared with fiber plus transceivers? A: A 40g qsfp+ dac cable cuts roughly 40–70ns latency by removing optical-electrical conversion. This advantage is critical for low-latency HCI and storage traffic.
Q12: Can this 40g qsfp+ dac cable negotiate 40G speed on SFP28 or SFP+ ports? A: 40G negotiation fails on non-QSFP+ ports due to different pinout and lane structure. Both ends require native QSFP+ ports to run this 40g qsfp+ dac cable at full bandwidth.
Q13: Can QSFP+ breakout DAC replace this standard point-to-point 40g qsfp+ dac cable? A: Breakout DAC splits one 40G port into four 10G ports. It cannot substitute this straight QSFP+ to QSFP+ 40g qsfp+ dac cable for native 40G links.
Q14: What quality validation tests does HYTOPTODEVICE run on each batch of 40g qsfp+ dac cable? A: Each batch runs BER scanning, link validation and hot-swap testing on Cisco Nexus hardware. Tests verify EEPROM readability and stable 40G signal quality.
Q15: What installation limits should bulk buyers note for a 40g qsfp+ dac cable? A: A 40g qsfp+ dac cable is designed only for short intra-rack copper links. It is not suitable for inter-row, cross-room or long-distance transmission.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




