• Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE

Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE

Buy HYTOPTODEVICE passive dac breakout cable, 3m 100G QSFP28 to 4×25G SFP28 twinax, pre-coded EEPROM for Cisco NX-OS / IOS-XE. Stable signal, fast lead time, bulk order, factory direct for distributors & system integrators.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco QSFP-4SFP25-CU3M 
2 Arista Networks  CAB-Q28-S28-3M
3 Brocade 100G-Q28-S28-C-0301
4 Huawei QSFP-4SFP25G-CU3M
5 Juniper QFX-Q-S-DAC-3M
6 Dell DAC-Q28-4SFP28-25G-3M
Description

Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 3m 100G QSFP28 to 4x25G SFP28 passive dac breakout cable serves as a direct replacement for Cisco QSFP-4SFP25-CU3M. Built on SFF-8662 MSA specifications, It adopts passive twinax copper design to deliver stable links, mapping one 100G QSFP28 port into four independent 25G SFP28 interfaces with no extra power supply required.
Hot-plug capable and pre-programmed with Cisco-matched EEPROM for seamless breakout identification on Cisco OS. It is widely adopted for medium intra-rack cabling projects. HYTOPTODEVICE supports bulk purchasing, OEM private labeling, custom EEPROM coding and batch signal testing with reliable delivery schedule.

Key Technical Specifications

Cisco Compatible
QSFP-4SFP25-CU3M
Vendor Name HYTOPTODEVICE
Connector QSFP28+ to 4 x SFP28 Max Data Rate 100Gbps
Cable Length 3m (10ft) Wire AWG AWG 26
Cable Type Passive Twinax Power Consumption ≤0.25W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols IEEE 802.3, QSFP28 MSA, SFF-8665
Minimum Bend Radius 50mm Application 100G to 2x 25G Ethernet, Data Centers

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Breakout Configuration: Ensure the host QSFP28 port supports channelization. Enable breakout mode (4x25G) via the switch CLI before connecting the cable.

  • Cabling Requirements: Do not exceed the minimum 50mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.

  • Port Installation Standard: Do not mix this breakout DAC with straight QSFP28 to QSFP28 DAC configuration.

  • Hot‑swap rule:Never pull or tug directly on the individual breakout legs. Always use the integrated pull-tab or bale latch when inserting or removing connectors.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: 0‑70℃, indoor cabinet deployment only.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated Cisco Hardware & Firmware

  • Cisco Nexus 9000 series:N9K-C93180YC-EX, N9K-C9364C, N9K-C9336C-FX2
  • Cisco Nexus 3000 series:N3K-C36180YC-R, N3K-C3524P-10G
  • Cisco UCS 6454 Fabric Interconnect, UCS C220 / C240 / C240 M6 servers
  • Firmware:NX-OS 9.3, 9.4, IOS-XE 17.3, 17.4

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 100G QSFP28 to 4 x 25G SFP28 passive DAC breakout cable can interoperate with mainstream network brands including Arista, Intel, Juniper, Dell, NVIDIA Mellanox and IBM, for mixed-vendor rack stacking and server fabric expansion.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 

• Medium-distance intra-rack 100G uplink breakout to 4×25G server NIC links
• Leaf-spine data center fabric port density expansion
• AI computing server rack interconnection
• HPC and storage cluster medium-range copper cabling
• Data center hardware refresh and network migration
• Distributor stock preparation and system integration turnkey projects

Connectivity Solutions(Applications) 

1. 100G to 4x25G Breakout Link for Switch-Switch
HYTOPTODEVICE 100G QSFP28 to 4x25G SFP28 breakout DAC cable FOR SWITCH TO SWITCH


2. 100G to 4x25G Breakout Link for Switch-NIC
HYTOPTODEVICE 100G breakout twinax cable for data center


The Core Feature


1.
Near-Zero Power, Full-Speed 100G

This 100G QSFP28 passive DAC breakout cable sips no extra energy, cutting heat and cost in crowded racks while keeping low-latency 100G for in-rack or adjacent-rack runs.

hytoptodevice 100G QSFP28 to 4 x 25G SFP28 passive dac breakout cable for data center

2.Host-Device Tested for Proven Interoperability

Every unit is link-up tested on real target switch models; ports come online on first install across major vendor gear, no field tuning or replacement loops. Not sure it fits? Compatibility Video available upon request.

hytoptodevice wholesale 100G QSFP28+ to 4 sfp28 breakout twinax cable for data center

3. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE  100g QSFP28 to 4 x sfp28 passive breaktout  dac cable for switches

FAQ

Q1: What is the maximum operating distance for this Cisco QSFP-4SFP25-CU3M compatible passive dac breakout cable, and what is the limit for the same cable family? A1: This specific Cisco coded passive dac breakout cable is factory calibrated for 3-meter links. The same 100G QSFP28 to 4×25G passive breakout DAC family can reach up to 5 meters with properly selected 24AWG copper. HYTOPTODEVICE offers 1m,3m and 5m options for different cabling plans.

Q2: Will Cisco NX-OS bring up four 25G breakout lanes automatically without breakout CLI setup? A2: No, sub-interfaces will not activate without breakout configuration. Cisco NX-OS requires dedicated breakout commands to split one QSFP28 port to four 25G ports, and our preloaded EEPROM supports this function.

Q3: Can this passive dac breakout cable connect Cisco Nexus switches to third-party 25G SFP28 server NICs? A3: Yes, cross-brand links work when remote 25G ports follow MSA standards. HYTOPTODEVICE validates all four lanes of this passive dac breakout cable for mainstream server adapters and switches.

Q4: Can network integrators rewrite the breakout EEPROM profile inside this HYTOPTODEVICE passive dac breakout cable? A4: Standard stocked passive dac breakout cables are pre-flashed and locked for stability. We accept custom EEPROM requests and can supply coding software and remote technical guidance.

Q5: Can NX-OS firmware upgrades cause transceiver recognition failures for third-party passive dac breakout cable? A5: Compatibility issues may appear after major firmware releases that update transceiver whitelist rules. HYTOPTODEVICE keeps EEPROM profiles updated and validates against mainstream NX-OS builds; recoding service is available if needed.

Q6: What information should buyers submit to HYTOPTODEVICE for correct EEPROM programming of this Cisco breakout cable for bulk purchase? A6: Please share switch model, NX-OS firmware version, breakout mode requirement and target Cisco part number. HYTOPTODEVICE completes breakout testing before shipment for bulk orders.

Q7: What shielding construction is used on this 3m passive dac breakout cable to minimize crosstalk between four 25G lanes? A7: Each 25G twinax pair has individual shielding plus overall braid and foil shielding. This dual-layer design suppresses crosstalk and EMI noise in dense rack wiring layouts.

Q8: Does HYTOPTODEVICE run lane-by-lane signal integrity testing for each batch of passive dac breakout cable before delivery? A8: Yes, each batch runs TDR and eye diagram tests across all four 25G lanes. HYTOPTODEVICE rejects units with lane imbalance to guarantee stable breakout performance.

Q9: Are the four SFP28 pull tabs of this passive dac breakout cable durable for repeated hot swap cycles in Cisco Nexus racks? A9: Our pull tabs use reinforced plastic overmolding and integrated strain relief. Each SFP28 branch is independently reinforced for frequent plug/unplug in high-density data center racks.

Q10: Does the outer jacket of HYTOPTODEVICE passive dac breakout cable meet LSZH low-smoke zero-halogen requirements? A10: Yes, the cable jacket complies with LSZH specifications for data center aisle deployment. All HYTOPTODEVICE passive dac breakout cables follow global fire safety standards.

Q11: What procurement savings can bulk buyers get choosing this passive dac breakout cable instead of separate optical transceivers? A11: Normally buyers save 40%–70% versus buying one 100G optical module plus four separate 25G optical modules for short copper breakout links. This passive dac breakout cable eliminates extra optical component costs.

Q12: Which use case suits this 3m passive dac breakout cable better than fiber breakout assemblies? A12: Select passive dac breakout cable for intra-rack links up to 3m where ultra-low latency and zero power consumption are priorities. Fiber breakout assemblies fit longer runs or applications requiring electrical isolation.

Q13: Can I use this Cisco-coded DAC cable to connect a Cisco switch to a Arista or HPE switch? A13: If you use a standard Cisco-coded cable, the Arista/HPE end might reject it due to vendor locking. For cross-vendor environments, it is highly recommended to order a Dual-Vendor Coded passive dac breakout cable (Cisco-coded on End A, and Arista/HPE-coded on End B) to ensure seamless plug-and-play compatibility on both sides.

Q14: Can I use this cable for a 40G port breaking down to 4x10G? A14: No. The internal electrical layout, wire tuning, and physical EEPROM configurations are optimized strictly for 100G-to-4x25G signaling. For 40G-to-10G applications, you must use a dedicated QSFP-4SFP10G-CU3M cable.

Q15: Why should I choose a 3-meter cable over a 1-meter cable? A15: A 1-meter passive dac breakout cable is typically restricted to connections within the same server rack (Top-of-Rack). A 3-meter length provides the necessary physical span to route cables neatly through cable trays to reach devices located in adjacent or nearby racks (Middle-of-Row or inter-rack patching).

Q16: Does this passive DAC breakout cable consume a lot of power? A16: No. Our Direct Attach Copper (DAC) cables are passive and consume near-zero power (<0.25W per end), that is far more energy-efficient than fiber optical transceivers or AOCs.

Q17: What should I do if my Cisco switch shows an "unsupported transceiver" error? A17: First check that you have applied the correct breakout CLI command for your Cisco platform. If the warning persists, the EEPROM signature may not match your firmware version. Reach out to HYTOPTODEVICE for a recoded passive dac breakout cable matched to your NX-OS or IOS-XE release.

Q18: Does this cable support hot-swapping? A18: Yes. it is hot-pluggable. The passive dac breakout cable is fully compliant with SFF-8665 and SFF-8402 standards. You can plug it in or remove it while switches and servers are live and running without risking electrical damage.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Cisco QSFP-4SFP25-CU3M Compatible 3m (10ft) 100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable Bulk Wholesale | HYTOPTODEVICE

Download