• HYTOPTODEVICE compatible 400G QSFP-DD passive copper twinax cable for data center,hpc
  • hytoptodevice  compatible 400G QSFP-DD to QSFP-DD PAM4 passive copper twinax cable for data center
  • 400G QSFP-DD passive DAC twinax cable HYTOPTODEVICE
  • 400G QSFP-DD passive direct attach copper twinax cable from hytoptodevice
  • HYTOPTODEVICE compatible 400G QSFP-DD passive copper twinax cable for data center,hpc
  • hytoptodevice  compatible 400G QSFP-DD to QSFP-DD PAM4 passive copper twinax cable for data center
  • 400G QSFP-DD passive DAC twinax cable HYTOPTODEVICE
  • 400G QSFP-DD passive direct attach copper twinax cable from hytoptodevice

Cisco QDD-400-CU3M Compatible 400G QSFP-DD to QSFP-DD Passive Copper Twinax Cable 3m(10ft)PAM4 | HYTOPTODEVICE

HYTOPTODEVICE acts as a reliable 400g passive cable supplier, offering Cisco QDD-400-CU3M compatible 3m 400G QSFP-DD to QSFP-DD passive copper twinax cable, pre-coded for Cisco platforms, stable PAM4 signal, available for bulk orders and custom EEPROM programming.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QDD-400-CU3M
2 Arista Networks CAB-D-D-400G-3M
3 Dell  DAC-Q56DD-400G-3M 
4 Juniper QDD-400G-DAC-3M 
5 NVIDIA/Mellanox  MCP1660-W003E26
Description

Cisco QDD-400-CU3M Compatible 400G QSFP-DD to QSFP-DD  Passive Copper Twinax Cable 3m(10ft)PAM4 | HYTOPTODEVICE

Product Overview

As a professional 400g passive cable supplier, HYTOPTODEVICE provides this 3m Cisco QDD-400-CU3M compatible 400G QSFP-DD to QSFP-DD passive copper twinax cable, compliant with IEEE 802.3ck and SFF-8636 MSA standards. This power-free PAM4 twinax cable uses impedance-controlled copper conductors to support 8×50G PAM4 lanes and full 400Gbps line rate. It is factory pre-programmed with Cisco-matched EEPROM profile, delivering plug-and-play compatibility on Cisco 400G QSFP-DD switches, routers and server adapters. Every cable undergoes strict signal integrity testing covering insertion loss, return loss and crosstalk inspection. This 3-meter variant is designed for longer intra-rack runs, switch stacking and short fabric interconnection inside data center cabinets. HYTOPTODEVICE supports bulk purchase, OEM labeling, custom EEPROM configuration and flexible MOQ for resellers, system integrators and data center contractors sourcing products from a trusted 400g passive cable supplier.

Key Technical Specifications

Cisco Compatible
QDD-400-CU3M
Vendor Name HYTOPTODEVICE
Connector QSFP-DD to QSFP-DD Max Data Rate 400Gbps
Cable Length 3m (10ft) Wire AWG AWG 27
Cable Type Passive Twinax Power Consumption ≤0.25W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols IEEE 802.3cd, QSFP-DD MSA, CMIS 4.0
Minimum Bend Radius 35mm Application 400G Ethernet and InfiniBand EDR

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Setting: Host QSFP-DD port must enable 400GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.

  • Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.sharp bends degrade 400G PAM4 signals and trigger link errors.

  • Port Installation Standard: Works only with standard QSFP-DD 400G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.

  • Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated Cisco Hardware & Firmware

  • Cisco Nexus 9332D-GX2B, Nexus 9364D-GX2B 400G leaf switches
  • Cisco Nexus 9808, Nexus 9804 high-density 400G spine switches
  • Cisco 8101-32H 400G routing platforms
  • Cisco QSFP-DD 400G network interface adapters
  • Cisco IOS-XE 17.3+, IOS-XR 7.3+ and newer firmware releases
  • Cisco DNA Center management platform compatible

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 400G QSFP-DD passive cable can interoperate with mainstream network brands including Arista, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion..

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 

• Longer intra-rack 400G cabling for Cisco leaf-spine fabric
• 3m jumpers for stacked Cisco 400G switches and routers
• Server uplink connections within large server cabinets
• 400G fabric upgrade for AI clusters and enterprise data centers
• Bulk procurement for distributors, contractors working with a reliable 400g passive cable supplier
• Lab POC validation for 400G PAM4 QSFP-DD passive copper twinax links

Connectivity Solutions(Applications) 

1. 400G to 400G Direct Link for Switch-Switch
hytoptodevice bulk 400G short-reach DAC twinax cable for switch to swith link


2. 400G to 400G Direct Link for Switch-NIC
hytoptodevice 400G QSFP-DD to QSFP-DD copper twinax cable for data center,hpc


3. 400G Data Center Networking Solution for HPC

hytoptodevice 400G QSFP-DD DAC cable for 400G data center


The Core Feature

1.Two Parts Out. One Cable In.

The 400G passive cable runs on a single twinax copper link, replacing the fiber pair and two transceivers — plug-and-play 400G for short-reach runs, nothing more to install.

hytoptodevie third-party compatible 400G QSFP-DD passive twinax cable

2. Zero Power Draw. Zero Added Heat.

No power. No heat. No compromise. The 400G QSFP-DD passive copper cable keeps dense racks cool while sustaining a low-latency 400G link for in-rack and adjacent-rack connections.

400G QSFP-DD to QSFP-DD passive direct attach copper twinax cable for data center switch

3.Verified on Your Host. Ready on Arrival

Every 400G passive twinax cable is matched and validated against the exact switch it will plug into — checked, then shipped. Deploy with zero guesswork: no link flaps, no port lockouts, no compatibility surprises. Unsure it matches your setup? Send us your switch model — we'll confirm compatibility before you order. Compatibility Video available upon request.

hytoptodevice wholesale 400G QSFP-DD passive attach copper twinax cable for data center

4. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE  QSFP-DD  to QSFP-DD 400g direct attach copper cable for switches

FAQ

Q1: Can this Cisco coded 3m 400G QSFP-DD passive cable work smoothly when connecting Cisco hardware to other vendor switches? A1: Compatibility depends on EEPROM programming. As a professional 400g passive cable supplier, HYTOPTODEVICE provides single or dual-vendor coding options. With matched coding, it works seamlessly on most MSA-compliant QSFP-DD platforms.

Q2: Is a QSFP-DD cable backward compatible with older QSFP28 (100G) or QSFP56 (200G) ports? A2: Physically, QSFP-DD ports are designed to accept older QSFP28 or QSFP56 modules with some physical and software limitations. However, this 400G QSFP-DD DAC cannot operate when inserted into legacy 100G/200G ports because of mismatched form factor and electrical lane definition.

Q3: Does using this third-party Cisco compatible 400G passive cable void the original Cisco hardware warranty? A3: It will not automatically void your Cisco switch or NIC warranty. Our HYTOPTODEVICE passive DAC cable complies with MSA and IEEE 802.3ck standards. Hardware vendors only deny warranty claims when cable defects directly cause permanent port damage.

Q4: Can I connect different brands of network interface cards (NICs) on each end of the cable? A4: Yes, provided each end is correctly coded or compatible with the respective hardware requirements of the connected servers or switches. HYTOPTODEVICE offers dual-sided custom EEPROM coding service to support mixed-brand NIC interconnection for bulk deployments.

Q5: Will this 3m Cisco compatible 400G QSFP-DD passive cable support auto-negotiation on Cisco switch ports? A5: Yes. This HYTOPTODEVICE passive DAC cable supports IEEE auto-negotiation. The negotiation function is managed by the switch or NIC firmware instead of the passive copper cable itself.

Q6: What is the maximum supported length for passive 400G copper twinax cables we supply? A6: Our maximum supported length for passive 400G QSFP-DD copper twinax is 3 meters. HYTOPTODEVICE supplies 0.5m, 1m, 2m and 3m variants; passive copper cannot preserve 400G PAM4 signal integrity beyond 3m.

Q7: What latency differences can I expect between this 400G passive twinax cable and fiber optic links for Cisco fabric? A7: 400G copper DAC delivers lower latency than fiber links. Electrical signals travel faster in copper than light through glass fiber, and DAC removes extra transceiver chip latency. Our product from this 400g passive cable supplier fits latency-sensitive AI and switching workloads.

Q8: What wire gauge (AWG) is typically used in 400G QSFP-DD cables? A8: Short lengths including 0.5m and 1m use 30AWG for better flexibility. 2m and 3m versions adopt 28AWG to minimize signal attenuation. HYTOPTODEVICE matches the proper AWG for every length to stabilize 400G PAM4 signal transmission.

Q9: Can this 3m Cisco 400G QSFP-DD passive cable sustain continuous full line-rate traffic in a busy data center? A9: Yes, within rated length and proper operating environment. Every HYTOPTODEVICE passive DAC cable passes line-rate burn-in testing, supporting sustained 400G line-rate traffic with zero packet loss.

Q10: Can this Cisco compatible 400G passive cable be reprogrammed to support InfiniBand NDR besides Ethernet? A10: It relies on EEPROM setup and host configuration. HYTOPTODEVICE can program this 400G QSFP-DD DAC for Ethernet or InfiniBand NDR; kindly specify your transmission mode when placing bulk orders.

Q11: What kind of pull-tab latch comes on the QSFP-DD connectors of this 3m Cisco passive cable? A11: It uses standard bail-clasp pull-tab latches. This mainstream design from HYTOPTODEVICE enables easy, tool-free plugging and unplugging without scratching or damaging switch ports.

Q12: Am I able to use this 3m passive 400G cable for cross-rack connections between separate cabinets? A12: Not recommended for regular cross-rack deployment. Our passive 400G twinax max reach is 3m, only suitable for adjacent racks. Longer cross-rack connections need 400G AOC fiber cables.

Q13: Can I get custom colored cable jackets for bulk orders placed with this 400g passive cable supplier? A13: Standard jacket color is black. HYTOPTODEVICE supports custom jacket colors for bulk OEM orders, you can submit color requirements alongside EEPROM coding requests before production.

Q14: What should I check first if this 3m Cisco QSFP-DD passive cable fails to bring up link on Nexus switches? A14: The link will stay down and IOS-XE may log link failure alerts. Check connector seating, confirm EEPROM coding matches your Cisco hardware, and inspect for over-bending. HYTOPTODEVICE technical team can assist with link debugging.

Q15: Why choose passive 400G twinax cables instead of fiber for short intra-rack Cisco deployments? A15: Passive DAC contains no laser chips, photodiodes or optical components. As a trusted 400g passive cable supplier, HYTOPTODEVICE builds these cables with copper and shielding materials, cutting hardware cost compared to optical modules.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • HYTOPTODEVICE compatible 400G QSFP-DD passive copper twinax cable for data center,hpc
  • hytoptodevice  compatible 400G QSFP-DD to QSFP-DD PAM4 passive copper twinax cable for data center
  • 400G QSFP-DD passive DAC twinax cable HYTOPTODEVICE
  • 400G QSFP-DD passive direct attach copper twinax cable from hytoptodevice

Download