Preloaded with exclusive Cisco adaptive EEPROM firmware, our 10G SFP+ DWDM Transceiver achieves plug-and-play operation without system alarms on all Cisco IOS and IOS-XE operating platforms. Equipped with industrial-grade EML laser, fast-response TEC constant temperature control and high-gain APD receiving chip, this 10G SFP+ DWDM Transceiver delivers outstanding wavelength locking performance, robust weak signal detection capability and strong anti-interference ability. Every finished 10G SFP+ DWDM Transceiver undergoes full 100% wavelength calibration, high-low temperature aging cycle and real-device compatibility testing, providing cost-effective, durable long-haul transmission hardware for large-scale multi-channel DWDM multiplex engineering projects.
Key Technical Specifications
A1: This HYTOPTODEVICE 10G SFP+ DWDM Transceiver adopts high-performance industrial EML laser components as its core light source. Paired with precision factory wavelength calibration and built-in TEC constant temperature control, the laser delivers narrow spectral linewidth, ultra-low signal distortion and outstanding stability, fully supporting error-free long-distance transmission up to 80km on single-mode fiber links.
Q2: What is the exact optical power budget margin of C23 1558.98nm 10G SFP+ DWDM Transceiver?
A2: Our C23-channel 10G SFP+ DWDM Transceiver reserves a generous, industry-calibrated optical power budget margin to adapt to complex field networking environments. This sufficient headroom effectively offsets routine fiber attenuation, splicing loss and connector insertion loss, ensuring stable and reliable 80km long-span transmission even on aging or high-loss fiber lines without additional optical amplification equipment.
Q3: What is the optical return loss (ORL) tolerance of Cisco compatible 10G SFP+ DWDM Transceiver?
A3: This Cisco-compatible 10G SFP+ DWDM Transceiver features excellent optical return loss tolerance, compliant with standard DWDM network ORL specifications. It can resist signal reflection interference caused by fiber end face gaps, poor connections or link defects, avoiding signal jitter and transmission failure, and maintaining consistent link stability in formal metro DWDM networking scenarios.
Q4: Is this 10G SFP+ DWDM Transceiver compatible with 50GHz grid spacing infrastructure?
A4: This 1558.98nm C23 10G SFP+ DWDM Transceiver is strictly calibrated based on standard 100GHz ITU grid spacing, designed exclusively for 100GHz fixed-grid DWDM Mux/Demux systems. It does not support 50GHz grid spacing equipment deployment, ensuring precise wavelength matching and zero crosstalk for matched 100GHz grid networking environments.
Q5: Is a tunable version available for this 10G SFP+ DWDM Transceiver for flexible channel adjustment?
A5: This model is a fixed-wavelength C23 1558.98nm 10G SFP+ DWDM Transceiver tailored for fixed-channel networking. We provide independent tunable DWDM module versions supporting flexible channel switching to adapt to variable wavelength requirements. Customized tunable solutions are available for project upgrades and flexible network deployment demands.
Q6: Will this carrier-grade 10G SFP+ DWDM Transceiver overheat in a fully populated 48-port switch?
A6: Equipped with built-in TEC active heat dissipation and intelligent over-temperature protection circuits, this 10G SFP+ DWDM Transceiver adapts to dense deployment scenarios of fully populated 48-port switches. It automatically adjusts laser operating power to reduce thermal load during high-temperature operation, effectively avoiding overheating failure and ensuring long-term stable operation in high-density cabinet environments.
Q7: What is the Mean Time Between Failures (MTBF) for industrial-grade 10G SFP+ DWDM Transceiver?
A7: This industrial-grade 10G SFP+ DWDM Transceiver boasts a high MTBF rating verified by professional reliability testing. Adopting premium MACOM core chips and optimized thermal design, the module features low failure rate and strong environmental adaptability, supporting long-term 7×24-hour continuous operation and meeting carrier-grade long-life networking deployment standards.
Q8: Are optical ports of 10G SFP+ DWDM Transceiver protected against dust during shipping and handling?
A8: All 10G SFP+ DWDM Transceivers are equipped with dedicated dust caps for LC optical ports before delivery. With professional anti-dust, anti-static and shockproof packaging, the optical ports are fully protected from dust contamination, scratch damage and external impact during transportation, handling and storage, ensuring factory-grade clean port status before installation.
Q9: Is the latching mechanism of 10G SFP+ DWDM Transceiver durable enough for repeated insertions?
A9: The latching structure of this 10G SFP+ DWDM Transceiver is made of high-strength industrial plastic with reinforced structural design. It has passed thousands of repeated plug-and-pull durability tests, maintaining stable locking performance and structural integrity after frequent insertion and extraction, perfectly adapting to daily equipment debugging, replacement and maintenance operations.
Q10: Are the LC connectors on long-haul 10G SFP+ DWDM Transceiver tight enough to prevent accidental disconnects?
A10: This long-haul 10G SFP+ DWDM Transceiver features upgraded reinforced snap-lock LC connectors with high-tension clamping design. The tight and stable buckle structure resists equipment vibration, cable pulling and daily movement, completely avoiding loose contact and accidental fiber disconnection to guarantee uninterrupted link operation.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


