Cisco DWDM-SFP10G-50.92 Compatible 10G DWDM SFP+ Transceiver | 1550.92nm C33 100GHz, 80km Single Mode, APD Receiver, DOM MonitoringProduct Overview
HYTOPTODEVICE Cisco DWDM-SFP10G-50.92 Compatible 10G DWDM SFP+ Transceiver is carrier-grade long-reach optical module designed for Cisco metro backbone, OTN transport and enterprise long-span DWDM networks. Compliant with SFP+ MSA and 10GBASE-DWDM ITU-T G.694.1 standards, this 10G DWDM SFP+ Transceiver operates on standard C33 1550.92nm wavelength with 100GHz channel spacing, delivering stable 10.3125Gbps full-duplex transmission up to 80km over G.652/G.655 single-mode fiber.
Pre-flashed with dedicated Cisco adaptive EEPROM firmware, our 10G DWDM SFP+ Transceiver guarantees zero-alarm plug-and-play operation on all Cisco IOS and IOS-XE platforms. Equipped with industrial EML laser, fast-response TEC cooling and high-gain APD receiver, this 10G DWDM SFP+ Transceiver delivers outstanding wavelength locking performance, sensitive weak signal reception and strong anti-interference capacity. Every 10G DWDM SFP+ Transceiver completes 100% wavelength calibration, high-low temperature aging and real-machine compatibility testing, providing cost-effective, reliable long-haul transmission for large-scale multi-channel DWDM multiplexing projects.
Key Technical Specifications
| Cisco Compatible |
DWDM-SFP10G-50.92 |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ |
Max Data Rate |
11.0957Gbps |
| Wavelength |
1550.92nm |
Max Distance |
80km |
| Connector |
Simplex LC |
Transmitter Type |
DWDM EML |
| Cable Type |
SMF |
Receiver Type |
APD |
| TX Power |
0~+4.0dBm |
Receiver Sensitivity |
< -23dBm |
| Max. Power Consumption |
≤1.7W |
Receiver Overload |
-7dBm |
| Protocols |
SFP+ MSA, SFF-8472, IEEE 802.3ae, RoHS Compliant |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Laser Safety
Operators must wear ESD anti-static wrist straps when installing this Cisco-compatible SFP+ 10G DWDM Transceiver. Never stare directly into powered LC optical ports, invisible 1550nm infrared laser can cause permanent retinal damage. For bench loopback testing with fiber spans under 10km, install 12–15dB fixed optical attenuators to prevent APD receiver saturation(ensuring the received power<-7dBm). Always clean fiber end-faces before mating connectors; tiny dust particles break DWDM channel power balance and induce long-term laser degradation. Reserve sufficient cabinet airflow around densely populated SFP+ 10G DWDM Transceiver slots to eliminate wavelength drift from thermal buildup. Regularly export basic DOM monitoring data via Cisco CLI to track laser bias current and link attenuation trends for proactive network maintenance.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Network Hardware
1.Native Cisco Platform Compatibility
HYTOPTODEVICE Cisco DWDM-SFP10G-50.92 compatible 10G DWDM SFP+ Transceiver features pre-flashed official Cisco adaptive firmware, completely eliminating gbic-invalid and unsupported transceiver alarms. It supports full DOM data identification and zero-packet-loss operation without manual configuration, achieving seamless compatibility with mainstream Cisco network hardware.
Supported Cisco Hardware Models:
- Cisco Catalyst 3650 Series Switches
- Cisco Catalyst 3850 Series Switches
- Cisco Catalyst 9200/9300 Series Switches
- Cisco ISR 4000/4300/4400 Enterprise Routers
- Cisco ASR 1000 Series Aggregation Routers
- Cisco Nexus 7000/9000 Data Center Core Switches
- Cisco OTN/ONS DWDM Service Platforms
2.Multi-Brand Cross Compatibility
This MSA-standard SFP+ 10G DWDM Transceiver supports cross-vendor deployment. Open-source brand switches & routers achieve plug-and-play operation directly; locked-brand hardware supports customized EEPROM re-flashing to bypass vendor authentication limits for hybrid DWDM network integration.
3.Value-Added Services
-
Custom EEPROM programming for multi-platform compatibility
-
Pre-bulk sample testing for project validation
-
Private label customization and deployment guides
-
Strict batch quality control
-
EEPROM configuration for legacy network environments
-
Free EEPROM recoding plus 24/7 technical support
Primary Application Scenarios
This 1550.92nm C33-channel 10G DWDM SFP+ Transceiver is specialized for long-span multi-wavelength DWDM transmission, widely deployed in carrier and enterprise Cisco network infrastructure:
1. Cross-city Metro DWDM Backbone Trunks: Realize high-efficiency multi-wavelength multiplexing with this 10G DWDM SFP+ Transceiver to save fiber resources and stabilize long-distance trunk transmission.
2. Data Center Cross-region Interconnection: This 10G DWDM SFP+ Transceiver supports 80km low-latency private line transmission for data synchronization and cross-base disaster recovery backup.
3. Enterprise Cross-park Long-distance Uplinks: Deploy high-stability 10G DWDM SFP+ Transceiver to solve long-span transmission bottlenecks for multi-branch enterprise core networks.
4. Remote Broadband Backhaul Networks: Utilize DWDM wavelength division technology of the 10G DWDM SFP+ Transceiver to expand long-distance broadband coverage with limited fiber resources.
5. Carrier OTN & Smart City Aggregation Links: This carrier-grade 10G DWDM SFP+ Transceiver provides reliable high-speed 10G transmission for OTN equipment and remote monitoring aggregation nodes.
Connectivity Solutions(Applications)
1.80km Long-haul 10G DWDM Transmission for OTN Platform
2. 100GHz Grid Multi-channel DWDM Mux Demux Networking

Features
1. High Capacity Long-haul DWDM Transmission
This high-quality 10G DWDM SFP+ Transceiver is precisely tuned for the 1550.92nm C33 channel, supporting stable multi-wavelength DWDM multiplexing up to 80km. With excellent chromatic dispersion tolerance and low signal distortion, the 10G DWDM SFP+ Transceiver minimizes bit error rates on long single-mode fiber spans, maximizing existing fiber utilization for cross-city metro backbone and carrier OTN transmission networks.

2.Stable 10G Connectivity for Data Center
Equipped with upgraded high-gain APD receiver chips, this bulk deployable long-haul 10G DWDM SFP+ Transceiver delivers superior weak signal capture capability compared with ordinary PIN modules. It effectively identifies severely attenuated optical signals after 80km transmission, eliminating link flapping and intermittent disconnections. This feature ensures stable 10G service continuity for long-span, high-loss fiber networking environments inside large-scale data center clusters.

3. Premium Module Built with Famous MACOM Mainstream Chips
This low power 10G DWDM SFP+ Transceiver adopts mainstream mature MACOM brand core chips as the core optical and electrical processing unit. Matched with optimized circuit layout and independent TEC heat dissipation structure, the chip set delivers stable high-speed signal output, strong anti-electromagnetic interference and excellent temperature adaptability, maintaining precise wavelength locking under complex variable-temperature long-distance DWDM transmission conditions.

4. Full Cisco Zero-alarm Interoperability
Pre-flashed with professional Cisco native firmware, this C33 channel 10G DWDM SFP+ Transceiver achieves zero-alarm, zero-error operation on all mainstream Cisco switches and routers. We provide free custom EEPROM dual-vendor coding for bulk orders, supporting adaptive identification for massive mainstream open-brand and locked-brand network devices.
Specific Compatibility Video available upon request.

5.Strict Quality Screening with Complete Test Records
All third-party compatible 10G DWDM SFP+ Transceivers undergo multi-stage rigorous reliability testing, including high-precision wavelength calibration, professional photoelectric performance inspection, and high-low temperature cycle aging and real-machine compatibility verification. Each finished 10G DWDM transciver module comes with complete standardized qualified test records. For bulk order customers, we can provide detailed official product shipment quality reports to support project filing, quality inspection and engineering acceptance.
Curious how? Tour the Test Center.

FAQ
Q1: What laser component is integrated inside HYTOPTODEVICE 10G DWDM SFP+ Transceiver to guarantee stable long-distance fiber transmission?
A1: Our HYTOPTODEVICE 1550.92nm C33 10G DWDM SFP+ Transceiver utilizes industrial EML laser as its core light source. Coupled with precise factory wavelength calibration and built-in TEC constant-temperature locking modules, this laser maintains ultra-narrow spectral linewidth and minimal power fluctuation. It delivers consistent optical performance to realize error-free 80km single-mode links, removing the need for extra dispersion compensation hardware for metro DWDM backbone routes.
Q2: How much calibrated optical power budget headroom is built into this C33 10G DWDM SFP+ Transceiver for complex field fiber deployments?
A2: HYTOPTODEVICE’s R&D team reserves sufficient industry-calibrated optical power budget margin during the design phase of this 1550.92nm C33 10G DWDM SFP+ Transceiver. This extra buffer offsets natural fiber attenuation, splicing loss and LC connector insertion loss, sustaining steady 80km transmission performance even on aged, high-loss field fiber without standalone optical amplifiers.
Q3: What ultra-low Bit Error Rate (BER) level can this carrier-grade 10G DWDM SFP+ Transceiver sustain under continuous full-load operation?
A3: This 1550.92nm C33 10G DWDM SFP+ Transceiver hits telecom-standard ultra-low BER performance up to 10^-12 under full-load running conditions. Rigorous factory photoelectric calibration suppresses signal noise and external interference, ensuring lossless, stable 10G data transport for long-distance cross-city DWDM core trunk networks.
Q4: Can HYTOPTODEVICE 10G DWDM SFP+ Transceiver work flawlessly alongside standard fixed-wavelength DWDM Mux/Demux passive rack hardware?
A4: This 1550.92nm C33 10G DWDM SFP+ Transceiver strictly adheres to ITU-T 100GHz grid wavelength specifications, supporting plug-and-play compatibility with all mainstream fixed-wavelength multiplexer and demultiplexer units. Every transceiver undergoes channel matching validation before shipment, with precise wavelength positioning to eliminate signal attenuation and cross-channel crosstalk in multi-wavelength multiplexing topologies.
Q5: Will mainstream switch operating systems flag this third-party 10G DWDM SFP+ Transceiver as an unsupported optic?
A5: All HYTOPTODEVICE 1550.92nm C33 10G DWDM SFP+ Transceivers come pre-programmed with custom EEPROM firmware tailored for major switch brands. The optimized chip data fully erases "Unsupported Transceiver" warning alerts on Cisco and other brand switch OS, enabling full hardware identification and complete feature activation without manual terminal configuration.
Q6: How high is the measurement accuracy of DDMI and DOM digital diagnostic data captured by this 10G DWDM SFP+ Transceiver?
A6: The built-in DDMI/DOM monitoring chip on this 1550.92nm C33 10G DWDM SFP+ Transceiver receives precise factory calibration for all monitoring metrics including transmit/receive optical power, internal temperature and laser bias current. Deviation of all real-time readings is controlled within industrial allowable limits, supplying highly reliable reference data for daily network monitoring and early fault diagnosis.
Q7: How will the running state of this 10G DWDM SFP+ Transceiver behave during switch firmware upgrade procedures?
A7: The 1550.92nm C33 10G DWDM SFP+ Transceiver supports stable hot-swap and reliable hardware recognition logic. When the switch executes firmware upgrades, the transceiver will temporarily pause data transmission without abnormal crash or permanent lockup. Once the upgrade finishes, the switch automatically re-identifies the optic and restores full 10G transmission capacity with no manual reinsertion required.
Q8: Does this 10G DWDM SFP+ Transceiver carry overheating risks when deployed inside fully populated 48-port switch racks?
A8: Equipped with integrated TEC active heat dissipation and intelligent over-temperature protection circuitry, this 1550.92nm C33 10G DWDM SFP+ Transceiver adapts seamlessly to dense full-population 48-port rack deployments. If cabinet temperature spikes sharply, the transceiver automatically cuts laser operating power to reduce heat output, preventing burnout of internal optical chips and supporting long-term stable operation in poorly ventilated rack environments.
Q9: Will prolonged high-temperature cabinet operation shorten the overall usable service life of this long-reach 10G DWDM SFP+ Transceiver?
A9: Our 1550.92nm C33 10G DWDM SFP+ Transceiver adopts upgraded heat-conductive housing and wide-temperature tolerant internal electronic components. The intelligent thermal protection system prevents long-term high-temperature aging of laser chips and circuit boards. Even with nonstop operation in high-temperature racks, it retains complete performance and extends the full service cycle without premature failure.
Q10: What full set of standardized reliability testing workflows does each 10G DWDM SFP+ Transceiver complete before factory dispatch?
A10: Every HYTOPTODEVICE 1550.92nm C33 10G DWDM SFP+ Transceiver passes multi-stage strict standardized testing before leaving the factory, covering wavelength calibration, BER performance inspection, high-low temperature cyclic aging, 80km link simulation, repeated plug durability testing and cross-brand equipment compatibility verification. We archive complete standardized test records and can provide official Product Quality Reports for all bulk order buyers.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


