Preloaded with exclusive Cisco adaptive EEPROM firmware, it achieves seamless, zero-alarm plug-and-play operation across all Cisco IOS and IOS-XE platforms. Featuring an industrial-grade EML laser, fast-response TEC thermal management, and a high-gain APD receiver, the module delivers outstanding wavelength locking precision, exceptional weak-signal sensitivity, and robust anti-interference capabilities. Every unit undergoes 100% wavelength calibration, thermal aging cycles, and real-switch compatibility testing, providing a cost-effective, durable long-haul solution for large-scale, multi-channel DWDM multiplexing deployments.
Key Technical Specifications
A1: Our HYTOPTODEVICE 1538.98nm C48 10G SFP+ DWDM 80km Transceiver adopts narrow-spectrum EML laser paired with factory precision wavelength locking design. The optimized optical waveform suppresses chromatic dispersion distortion produced during long-distance signal transmission. It delivers stable error-free 80km single-mode transmission without needing external dispersion compensation devices, perfectly matching metro long-haul DWDM trunk deployment requirements.
Q2: Is the receiving end of this C48 10G SFP+ DWDM 80km Transceiver sensitive enough to capture attenuated weak optical signals?
A2: This transceiver equips high-gain APD receiver chip with professionally calibrated receiving sensitivity. Even after long-distance fiber attenuation creates faint light signals, the receiver can accurately identify low-power optical inputs without frame loss or bit error surges. It maintains stable signal reception on aged, high-loss field fiber links with heavy splicing and connector loss.
Q3: Can the integrated TEC thermoelectric cooler respond rapidly when sudden temperature surges occur inside the module?
A3: The built-in TEC cooling unit of the 1538.98nm C48 10G SFP+ DWDM 80km Transceiver features real-time fast-response temperature sensing logic. Once internal temperature rises sharply, the TEC instantly adjusts cooling power to stabilize laser operating temperature. It avoids wavelength drift and power fluctuation caused by abrupt thermal changes, locking consistent optical output under volatile rack temperature conditions.
Q4: Does this 10G SFP+ DWDM 80km Transceiver support DWDM systems that adopt 50GHz channel grid spacing?
A4: The 1538.98nm C48 transceiver strictly follows ITU-T standard 100GHz wavelength grid specifications, which is the mainstream standard for conventional DWDM multiplexing racks. It cannot achieve stable matching with 50GHz ultra-dense grid Mux/Demux hardware; mismatched channel spacing will trigger severe cross-channel crosstalk and signal interference, so it only fits standard 100GHz grid multiplex network architectures.
Q5: Does HYTOPTODEVICE 10G SFP+ DWDM 80km Transceiver support customizable dual-vendor EEPROM coding?
A5: All 1538.98nm C48 10G SFP+ DWDM 80km Transceiver units support full dual-vendor firmware customization. Our technical team can pre-flash dual-brand identification data before shipment, enabling the optic to be recognized normally on two different mainstream brand switch platforms simultaneously without manual CLI configuration adjustments on site.
Q6: Will DDMI digital diagnostic functions generate false alarm notifications within my network management system?
A6: The DDMI monitoring chip on this C48 transceiver undergoes full-range factory calibration for all power, temperature and current indicators. Alarm threshold parameters are set strictly per industrial telecom standards, effectively filtering transient data fluctuations. False alarms triggered by instantaneous signal jitter are greatly minimized, delivering reliable real-time monitoring without unnecessary network alert noise.
Q7: Does this 10G SFP+ DWDM 80km Transceiver integrate native intelligent over-temperature protection circuits?
A7: The 1538.98nm C48 transceiver combines TEC active heat dissipation with dedicated over-temperature protection circuitry. Once internal working temperature exceeds the predefined safety threshold, the device automatically reduces laser operating power to cut heat generation. This built-in safeguard prevents burnout of internal optical chips and circuit boards during continuous high-temperature rack operation.
Q8: Will prolonged high-temperature running inside switch racks shorten the total service lifespan of this long-reach optical transceiver?
A8: Our 1538.98nm C48 10G SFP+ DWDM 80km Transceiver uses upgraded heat-conductive housing and wide-temperature resistant electronic components. The intelligent thermal protection mechanism suppresses long-term thermal aging of laser chips and PCB boards. Even under nonstop operation in high-temperature cabinet environments, it retains complete transmission performance and avoids premature service failure.
Q9: Are the LC optical end faces of this transceiver fully shielded from dust, oil stains and scratches during delivery and field handling?
A9: Every HYTOPTODEVICE 1538.98nm C48 transceiver is fitted with tight-fitting LC dust caps right after assembly. Paired with fully sealed anti-static shockproof individual packaging, the optical ports are fully isolated from floating dust, fingerprint grease and surface abrasion during transportation, warehouse storage and on-site installation, preserving original factory optical performance.
Q10: Does this 10G SFP+ DWDM 80km Transceiver fully comply with universal SFP+ MSA dimensional and mechanical specifications?
A10: This 1538.98nm C48 transceiver is manufactured and 100% validated in accordance with global unified SFP+ MSA SFF-8431/SFF-8472 standards. Its overall outline, pin layout, port position and locking latch structure all match universal SFP+ dimension benchmarks, enabling smooth hot-swap insertion without jamming or loose seating on all MSA-compliant switches and routers.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


