Pre-flashed with dedicated Cisco adaptive EEPROM firmware, it guarantees seamless, zero-alarm plug-and-play interoperability across all Cisco IOS and IOS-XE platforms. Featuring an industrial-grade EML laser, fast-response TEC cooling, and a high-gain APD receiver, the module delivers outstanding wavelength locking precision, exceptional weak-signal sensitivity, and robust anti-interference performance. Each unit undergoes 100% wavelength calibration, thermal aging, and real-switch testing to provide a cost-effective, reliable long-haul solution for large-scale, multi-channel DWDM multiplexing projects.
A1: The DDMI monitoring chip on this C54 transceiver undergoes full-range factory calibration for all optical power, temperature and laser bias current indicators. Alarm threshold parameters are set strictly following telecom industry standards to filter transient data fluctuations. False alarms induced by instantaneous signal jitter are largely eliminated, providing reliable real-time monitoring without redundant network alert noise.
Q2: Does this 10G DWDM SFP 80km Transceiver integrate native intelligent over-temperature protection circuits?
A2: The 1534.25nm C54 transceiver combines TEC active heat dissipation with dedicated over-temperature protection circuitry. Once internal working temperature exceeds the preset safety threshold, the transceiver automatically reduces laser operating power to cut heat output. This built-in safeguard prevents burnout of internal optical chips and circuit boards during continuous high-temperature rack operation.
Q3: Will prolonged high-temperature running inside switch racks shorten the total service lifespan of this long-reach optical transceiver?
A3: Our 1534.25nm C54 10G DWDM SFP 80km Transceiver adopts upgraded heat-conductive housing and wide-temperature resistant electronic components. The intelligent thermal protection mechanism suppresses long-term thermal aging of laser chips and PCB boards. Even under nonstop operation in high-temperature cabinet environments, it retains complete transmission performance and avoids premature service failure.
Q4: Are the LC optical end faces of this transceiver fully shielded from dust, oil stains and scratches during delivery and field handling?
A4: Every HYTOPTODEVICE 1534.25nm C54 transceiver is fitted with custom tight-fitting LC dust caps right after assembly. Paired with fully sealed anti-static shockproof individual packaging, the optical ports are fully isolated from floating dust, fingerprint grease and surface abrasion during transportation, warehouse storage and on-site installation, preserving original factory optical transmission performance.
Q5: Does this 10G DWDM SFP 80km Transceiver fully comply with universal SFP+ MSA dimensional and mechanical specification benchmarks?
A5: This 1534.25nm C54 transceiver is manufactured and 100% validated in accordance with global unified SFP+ MSA SFF-8431/SFF-8472 standards. Its overall outline, pin layout, port position and locking buckle structure all match universal SFP+ dimension benchmarks, enabling smooth hot-swap insertion without jamming or loose seating on all MSA-compliant switches and routers.
Q6: What production lead time can clients expect when placing large-volume bulk orders for this C54 transceiver?
A6: HYTOPTODEVICE maintains stable raw material stock for the 1534.25nm C54 10G DWDM SFP 80km Transceiver. Standard large batch orders without custom coding requirements have a regular lead time of 7–10 working days. Orders with dual-vendor firmware customization or special packaging demands will take roughly 12–15 working days, and priority scheduling can be arranged for urgent project orders upon negotiation.
Q7: Can this DWDM transceiver support transmission rates lower than 10Gbps, such as 1Gbps Ethernet or OC-192?
A7: No. The 1534.25nm C54 transceiver is designed for native 10Gbps operation and optimized for OC-192 standard 10G transport. It cannot stably operate at low 1Gbps speeds by default; we can supply separate dedicated 1G DWDM optical transceivers if clients require low-speed long-distance transmission solutions.
Q8: Is professional technical support available if fiber links fail to establish normal communication after installation?
A8: We provide full-lifecycle technical support for all purchasers of our 1534.25nm C54 transceivers. Our engineering team offers remote troubleshooting guidance via email, video call or online text to diagnose link failure causes including compatibility issues, wiring errors and parameter mismatches. For complex on-site faults, we supply detailed fault analysis reports and targeted resolution plans free of charge.
Q9: Are the internal laser chips of this transceiver sourced from trustworthy tier-1 mainstream optical component manufacturers?
A9: All laser and receiver components equipped on the 1534.25nm C54 10G DWDM SFP 80km Transceiver are imported from certified tier-1 global optical chip suppliers. Each batch of raw optical components undergoes incoming quality inspection before assembly, eliminating unqualified low-grade chips to guarantee consistent long-term transmission stability and uniform product quality.
Q10: Is there a high risk that this C54 wavelength transceiver will be discontinued (EOL) in the near future?
A10: The 1534.25nm C54 channel is a standard ITU DWDM wavelength widely adopted by global telecom operators, and this 80km long-reach model remains one of our core mass-production lines. We have no EOL plan for this product within the next 3–5 years, and we will notify clients at least 12 months in advance if any production suspension adjustment is scheduled in the future.
Q11: Can customers obtain a complete detailed datasheet that lists precise TX and RX optical power threshold parameters?
A11: We provide official comprehensive datasheets for the 1534.25nm C54 transceiver covering all core electrical and optical indicators. The document clearly records accurate transmit power range, receive sensitivity, overload power, ORL tolerance and DDMI monitoring thresholds. Clients can request the latest datasheet via our sales team at any time before or after ordering.
Q12: Does the individual product packaging carry clear marking of the exact wavelength and channel number for quick identification?
A12: Each single 1534.25nm C54 transceiver comes with a dedicated outer label printed with complete specification information. The packaging sticker prominently marks the exact wavelength 1534.25nm, C54 channel, transmission distance and product model code. Clients can rapidly distinguish different DWDM channel goods without extra testing upon receiving shipments.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


