• HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center
  • HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center

Cisco CWDM-SFP-1610-120 Compatible 1.25G CWDM SFP Transceiver Module | 1000BASE-CWDM 1610nm 120km Bulk Wholesale | HYTOPTODEVICE

Factory direct Cisco CWDM-SFP-1610-120 compatible 1.25G CWDM SFP module. 1610nm long-wave design delivers ultra-low attenuation for stable 120km passive transmission over G.652.D/OS2 fiber. Features multi-brand zero-alarm plug-and-play, DDM monitoring and low heat output. Available for bulk wholesale and custom firmware for CWDM ring upgrades and remote telecom trunk links.
NO. Brand  Compatible P/N Remarks
1 Cisco CWDM-SFP-1470-120
2 Cisco CWDM-SFP-1490-120
3 Cisco CWDM-SFP-1510-120
4 Cisco CWDM-SFP-1530-120
5 Cisco CWDM-SFP-1550-120
6 Cisco CWDM-SFP-1570-120
7 Cisco CWDM-SFP-1590-120
8 Cisco CWDM-SFP-1610-120
Description

Cisco CWDM-SFP-1610-120 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1610nm 120km Bulk Factory Wholesale

Product Overview

This 1.25G 1610nm 120km CWDM SFP is fully pin-to-pin compatible with Cisco CWDM-SFP-1610-120. Compliant with 1000BASE-CWDM and SFP MSA standards, it supports 120km passive transmission on G.652.D/OS2 single-mode fiber, serving as a reliable long-wave channel for full-spectrum CWDM networking.
The 1610nm CWDM long-wave band offers low attenuation and minimal chromatic dispersion, delivering stronger anti-interference and stable long-span performance than mid-band wavelengths. It effectively avoids long-distance signal fading and is ideal for remote trunk links and CWDM ring network capacity expansion.
Pre-calibrated EEPROM firmware ensures zero-alarm plug-and-play on Cisco and other mainstream network devices. It supports hot-swap and full SFF-8472 DDM real-time monitoring. We provide factory bulk supply, custom firmware, logo printing and neutral packaging for global telecom and ISP projects.

Key Technical Specifications
 
Cisco Compatible CWDM-SFP-1610-120 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1610nm Max  Distance 120KM
Connector Duplex LC Transmitter Type DFB CWDM
Cable Type SMF Receiver Type APD
TX Power 0~+5dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤1W Receiver Overload -9.0dBm
Protocols IEEE 802.3z, SFF‑8472, SFP MSA, RoHS‑6, Class 1 Laser Operation Temperature 0 to 70°C (32 to 158°F)
For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Matching: Use OS2 9/125μm single-mode fiber (up to 120km). Use standard LC-UPC connectors only; LC-APC connectors are strictly prohibited.

  • Optical Attenuation (Crucial): Never direct-connect short links (<20km). If received power exceeds -9 dBm, add an inline optical attenuator (15–20 dB) at the Rx port to prevent receiver burnout.

  • Connection & Rx/Tx Check: Ensure correct Tx/Rx fiber pairing. Keep LC connector end-faces clean to avoid extra insertion loss and bit errors.

  • Link Budget: Account for total optical loss (splices, adapters, fiber distance) before deployment to stay within the 32 dB link budget.

  • Thermal Management: Operating temp: 0°C to 70°C. Avoid dense stacking of high-power 120km SFPs to prevent overheating.

  • Hot-Swapping: Supports hot-plugging. Gently insert/pull using the bail latch to protect port pins.

For detailed operation instructions, please refer to the User Guide.

Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
  • Cisco Catalyst 2960, 3560, 3750, 3850, 9200, 9300 Enterprise Switches
  • Cisco ISR 4000/4300/4400 Series Enterprise Branch Routers
  • Cisco ASR 1000 Series Aggregation Service Backbone Routers
  • Cisco Firepower Security Firewall & Access Gateway Devices
  • All Cisco devices supporting original CWDM-SFP-1610-120 transceiver modules

2. Multi-Brand Cross Compatibility

This module follows universal SFP MSA norms. It works smoothly with Huawei, H3C, Arista, Juniper, HPE, Ruijie and ZTE devices.

3.Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility

  • Pre-bulk sample testing for project validation

  • Private label customization and deployment guides

  • Strict batch quality control

  • EEPROM configuration for legacy network environments

  • Free EEPROM recoding plus 24/7 technical support


Primary Application Scenarios

  • 120km cross-city ultra-long trunk links for ISP and telecom backbone networks
  • 1610nm core stable channel for full-band CWDM ring network expansion and upgrade
  • Long-distance cross-branch enterprise campus and park core data transmission
  • Remote base station, industrial monitoring and outdoor long-distance network extension
  • Legacy single-fiber network capacity upgrade for multi-wavelength multiplexing service expansion

Connectivity Solutions(Applications)

1.
1G Long-Haul CWDM Direct Connection with Network Switches

1610nm 120km ultra-long point-to-point trunk link for cross-city ISP network

2. 1G CWDM Direct Connection with Mux/Demux

1610nm initial CWDM channel for full-band multi-wavelength network expansion

The Core Feature

1. Low Power & Cost-Effective Single-Fiber CWDM Solution

Adopting ultra-low-power chip design, the module power consumption is less than 1W, effectively reducing long-term network operation power costs. It supports high-efficiency single-fiber multiplexing transmission without additional EDFA amplifiers, greatly lowering the overall investment of 120km long-haul trunk projects.

1610nm low-loss initial band CWDM SFP Cisco plug and play zero-error module


2.
Verified Host Interoperability for Cisco Devices

Professionally calibrated firmware realizes zero-alarm plug-and-play recognition for Cisco devices. All modules pass strict compatibility tests with Huawei, H3C, Juniper, MikroTik and other mainstream brands, ensuring stable and error-free operation in hybrid network environments. Specific Compatibility Video available upon request.

1.25G 120km ultra-long reach CWDM transceiver with intelligent DDM diagnosis

3.Rigorous Testing, Uncompromising Reliability

Every batch of modules undergoes rigorous standardized tests, including high and low temperature cycling aging, 120km long-link stability test, optical power calibration and full DDM function verification. Strict quality control ensures consistent batch performance and long-term stable operation.Curious how? Tour the Test Center.

HYTOPTODEVICE 1.25g sfp module cwdm 120km smf for comprehensive test


FAQ

Q1: Why do 120km high-power CWDM modules face receiver damage risks in short-distance deployment?
A: 120km-class CWDM transceivers adopt high-output DFB lasers to meet ultra-long-span loss demands. When used in short links below 10km without attenuation processing, excessive optical power oversaturates the receiver, causing signal distortion, continuous bit errors and permanent hardware damage.

Q2: What attenuation specifications are required for bench testing 120km CWDM modules?
A: This high-Tx-power 120km CWDM module requires standardized attenuation during laboratory testing. A 20 dB to 25 dB fixed optical attenuator must be connected between Tx and Rx ports to simulate real fiber loss and protect the receiver from burnout.

Q3: What laser technology is used for 1610nm 120km CWDM transceivers?
A: Our 1610nm terminal CWDM modules adopt industrial-grade DFB laser chips. Featuring ultra-precise wavelength control and low dispersion drift, it delivers stable, clean signal output and adapts to long-term full-load 120km long-haul network operation.

Q4: Why must G.652.D fiber be used for 1610nm 120km CWDM transmission?
A: Legacy G.652.A/B fiber has high inherent attenuation and unstable dispersion performance. Over 120km ultra-long spans, cumulative loss exhausts the module’s power budget and triggers packet loss and link flapping. G.652.D low-loss fiber optimizes ultra-long-wave transmission for reliable 120km CWDM operation.

Q5: Are 1610nm 120km CWDM SFPs compatible with all standard SFP ports?
A: Yes. This CWDM transceiver strictly complies with global SFP MSA unified specifications. It supports hot-swap plug-and-play on all standard SFP ports without hardware modification or complex configuration.

Q6: Does the 1610nm CWDM module support multi-brand network device compatibility?
A: This module achieves full compatibility with Cisco, Huawei, Juniper, MikroTik and other mainstream devices. Pre-flashed adaptive firmware avoids system alarms and port blocking, with real-machine testing verified for mixed-brand network deployment.

Q7: What is the power consumption level of 1610nm 120km CWDM modules?
A: Built with energy-saving low-power circuitry, this transceiver consumes less than 1W with minimal heat generation. It reduces long-term equipment room energy consumption and ensures stable 24/7 operation for large-scale CWDM networking projects.

Q8: How does temperature variation affect 1610nm laser wavelength stability?
A: Ambient temperature changes cause tiny laser wavelength drift, which affects channel isolation in dense CWDM multiplexing systems. Our modules undergo strict thermal aging and wavelength calibration to maintain precise 1610nm terminal channel stability under variable temperatures.

Q9: What causes OTDR high-loss anomalies on long CWDM fiber links?
A: OTDR detected high-loss points are mainly caused by non-standard construction, including poor fiber splicing, contaminated connector end faces, loose couplings and aging fiber lines. Cumulative insertion loss consumes link budget and triggers long-haul link instability.

Q10: Can standard EDFA amplifiers extend 1610nm CWDM transmission distance?
A: No. Standard EDFA devices only amplify the 1530–1565nm C-band and cannot support 1610nm ultra-long CWDM wavelengths. Breaking the 120km transmission limit requires professional DWDM systems. Our 1610nm modules support pure passive 120km transmission for clean, stable and cost-effective long-haul links.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

  • HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center

Download