• HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center
  • HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center

Cisco CWDM-SFP-1590-120 Compatible 1.25G CWDM SFP Transceiver Module | 1000BASE-CWDM 1590nm 120km Bulk Wholesale | HYTOPTODEVICE

Factory direct Cisco CWDM-SFP-1590-120 compatible 1.25G CWDM SFP module. 1590nm long-wave design delivers ultra-low attenuation for stable 120km passive transmission over G.652.D/OS2 fiber. Features multi-brand zero-alarm plug-and-play, DDM monitoring and low heat output. Available for bulk wholesale and custom firmware for CWDM ring upgrades and remote telecom trunk links.
NO. Brand  Compatible P/N Remarks
1 Cisco CWDM-SFP-1470-120
2 Cisco CWDM-SFP-1490-120
3 Cisco CWDM-SFP-1510-120
4 Cisco CWDM-SFP-1530-120
5 Cisco CWDM-SFP-1550-120
6 Cisco CWDM-SFP-1570-120
7 Cisco CWDM-SFP-1590-120
8 Cisco CWDM-SFP-1610-120
Description

Cisco CWDM-SFP-1590-120 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1590nm 120km Bulk Factory Wholesale

Product Overview

This 1.25G 1590nm 120km CWDM SFP is fully pin-to-pin compatible with Cisco CWDM-SFP-1590-120. Compliant with 1000BASE-CWDM and SFP MSA standards, it supports 120km passive transmission on G.652.D/OS2 single-mode fiber, serving as a reliable long-wave channel for full-spectrum CWDM networking.
The 1590nm CWDM long-wave band offers low attenuation and minimal chromatic dispersion, delivering stronger anti-interference and stable long-span performance than mid-band wavelengths. It effectively avoids long-distance signal fading and is ideal for remote trunk links and CWDM ring network capacity expansion.
Pre-calibrated EEPROM firmware ensures zero-alarm plug-and-play on Cisco and other mainstream network devices. It supports hot-swap and full SFF-8472 DDM real-time monitoring. We provide factory bulk supply, custom firmware, logo printing and neutral packaging for global telecom and ISP projects.

Key Technical Specifications
 
Cisco Compatible CWDM-SFP-1590-120 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1590nm Max  Distance 120KM
Connector Duplex LC Transmitter Type DFB CWDM
Cable Type SMF Receiver Type APD
TX Power 0~+5dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤1W Receiver Overload -9.0dBm
Protocols IEEE 802.3z, SFF‑8472, SFP MSA, RoHS‑6, Class 1 Laser Operation Temperature 0 to 70°C (32 to 158°F)
For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Matching: Use OS2 9/125μm single-mode fiber (up to 120km). Use standard LC-UPC connectors only; LC-APC connectors are strictly prohibited.

  • Optical Attenuation (Crucial): Never direct-connect short links (<20km). If received power exceeds -9 dBm, add an inline optical attenuator (15–20 dB) at the Rx port to prevent receiver burnout.

  • Connection & Rx/Tx Check: Ensure correct Tx/Rx fiber pairing. Keep LC connector end-faces clean to avoid extra insertion loss and bit errors.

  • Link Budget: Account for total optical loss (splices, adapters, fiber distance) before deployment to stay within the 32 dB link budget.

  • Thermal Management: Operating temp: 0°C to 70°C. Avoid dense stacking of high-power 120km SFPs to prevent overheating.

  • Hot-Swapping: Supports hot-plugging. Gently insert/pull using the bail latch to protect port pins.

For detailed operation instructions, please refer to the User Guide.

Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
  • Cisco Catalyst 2960, 3560, 3750, 3850, 9200, 9300 Enterprise Switches
  • Cisco ISR 4000/4300/4400 Series Enterprise Branch Routers
  • Cisco ASR 1000 Series Aggregation Service Backbone Routers
  • Cisco Firepower Security Firewall & Access Gateway Devices
  • All Cisco devices supporting original CWDM-SFP-1590-120 transceiver modules

2. Multi-Brand Cross Compatibility

This module follows universal SFP MSA norms. It works smoothly with Huawei, H3C, Arista, Juniper, HPE, Ruijie and ZTE devices.

3.Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility

  • Pre-bulk sample testing for project validation

  • Private label customization and deployment guides

  • Strict batch quality control

  • EEPROM configuration for legacy network environments

  • Free EEPROM recoding plus 24/7 technical support


Primary Application Scenarios

  • 120km cross-city ultra-long trunk links for ISP and telecom backbone networks
  • 1590nm core stable channel for full-band CWDM ring network expansion and upgrade
  • Long-distance cross-branch enterprise campus and park core data transmission
  • Remote base station, industrial monitoring and outdoor long-distance network extension
  • Legacy single-fiber network capacity upgrade for multi-wavelength multiplexing service expansion

Connectivity Solutions(Applications)

1.
1G Long-Haul CWDM Direct Connection with Network Switches

1590nm 120km ultra-long point-to-point trunk link for cross-city ISP network

2. 1G CWDM Direct Connection with Mux/Demux

1570nm initial CWDM channel for full-band multi-wavelength network expansion


The Core Feature

1. Low Power & Cost-Effective Single-Fiber CWDM Solution

Adopting ultra-low-power chip design, the module power consumption is less than 1W, effectively reducing long-term network operation power costs. It supports high-efficiency single-fiber multiplexing transmission without additional EDFA amplifiers, greatly lowering the overall investment of 120km long-haul trunk projects.

1590nm low-loss initial band CWDM SFP Cisco plug and play zero-error module


2.
Verified Host Interoperability for Cisco Devices

Professionally calibrated firmware realizes zero-alarm plug-and-play recognition for Cisco devices. All modules pass strict compatibility tests with Huawei, H3C, Juniper, MikroTik and other mainstream brands, ensuring stable and error-free operation in hybrid network environments.Specific Compatibility Video available upon request.
1.25G 120km ultra-long reach CWDM transceiver with intelligent DDM diagnosis

3.Rigorous Testing, Uncompromising Reliability

Every batch of modules undergoes rigorous standardized tests, including high and low temperature cycling aging, 120km long-link stability test, optical power calibration and full DDM function verification. Strict quality control ensures consistent batch performance and long-term stable operation.
Curious how? Tour the Test Center.

HYTOPTODEVICE 1.25g sfp module cwdm 120km smf for comprehensive test


FAQ

Q1: Why are 120km high-power CWDM modules prone to receiver damage in short-link scenarios?
A:120km CWDM modules adopt high-power DFB lasers for long-span coverage. Without proper attenuation on short links under 10km, excessive optical power oversaturates the receiver, causing bit errors, signal distortion and permanent component damage.

Q2: What attenuation configuration is required for standard bench testing of 120km CWDM modules?
A:CWDM 120KM module with high Tx power, A minimum of 15 dB to 20 dB fixed optical attenuator must be inserted between Tx and Rx during bench testing to prevent receiver damage.

Q3: What laser solution is adopted for 1.25G 120km long-wave CWDM SFP modules?
A:These 1590nm long-haul transceivers use industrial-grade DFB laser chips with tight wavelength tolerance and low dispersion drift. The stable power output ensures clean signal transmission under continuous 120km full-load operation.

Q4: Why is G.652.D fiber mandatory for 120km CWDM long-wave transmission instead of old fiber types?
A:Legacy G.652.A/B fiber has higher attenuation and unstable dispersion. Over 120km distances, cumulative loss exhausts the power budget and triggers packet loss. G.652.D low-loss fiber provides optimized long-wave transmission for reliable 120km CWDM operation.

Q5: Can 1.25G 120km CWDM SFPs be universally inserted into all standard SFP ports?
A:Yes. This CWDM SFP fully complies with universal SFP MSA mechanical and electrical standards. It supports hot-swap plug-and-play on all standard SFP ports without hardware changes or complex configuration.

Q6: Does the 1590nm 120km CWDM module support mainstream multi-brand network device compatibility?
A:It delivers full compatibility with Cisco, Huawei, Juniper, MikroTik and other mainstream devices. Preloaded adaptive firmware avoids alarms and port blocking, with real-device verification for mixed-brand network deployment.

Q7: What is the actual power consumption and heat generation of 1.25G 120km CWDM transceivers?
A:Featuring optimized low-power design, the module consumes less than 1W with low heat output. It reduces long-term operational energy costs and ensures stable 24/7 performance for large-scale CWDM deployments.

Q8: How does ambient temperature change affect long-wave CWDM laser wavelength stability?
A:High ambient temperature causes minor laser wavelength drift, which may degrade channel isolation in dense CWDM systems. Our modules undergo strict thermal calibration to stabilize 1590nm wavelength output under varying temperatures.

Q9: What causes abnormal high-loss points on OTDR detection of long CWDM fiber links?
A:OTDR high-loss points usually result from poor splicing, dirty connector end faces, loose coupling or aging fiber. Accumulated insertion loss consumes link budget and causes instability on long 120km CWDM trunk lines.

Q10: Is it feasible to use EDFA amplifiers to extend the transmission distance of 120km CWDM modules?
A:No. Standard EDFAs only amplify the 1530–1565nm C-band and cannot cover 1590nm long-wave CWDM channels. Extending beyond 120km requires professional DWDM equipment. Our 1590nm modules support pure passive 120km transmission for stable, amplifier-free long-haul links.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

  • HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center

Download