• HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center
  • HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center

Cisco CWDM-SFP-1550-120 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1550nm 120km Bulk Wholesale | HYTOPTODEVICE

Factory direct Cisco CWDM-SFP-1550-120 compatible 1.25G CWDM SFP module. High-performance 1550nm ultra-low-loss wavelength supports 120km passive long-haul transmission over G.652.D OS2 fiber. Zero-alarm multi-brand compatibility, full DDM monitoring, low power consumption. Bulk wholesale & custom firmware service for ISP backbone and enterprise CWDM ring network projects. 
NO. Brand  Compatible P/N Remarks
1 Cisco CWDM-SFP-1470-120
2 Cisco CWDM-SFP-1490-120
3 Cisco CWDM-SFP-1510-120
4 Cisco CWDM-SFP-1530-120
5 Cisco CWDM-SFP-1550-120
6 Cisco CWDM-SFP-1570-120
7 Cisco CWDM-SFP-1590-120
8 Cisco CWDM-SFP-1610-120
Description

Cisco CWDM-SFP-1550-120 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1550nm 120km Bulk Factory Wholesale

Product Overview

      This 1.25G 1550nm 120km CWDM SFP is fully pin-to-pin compatible with Cisco CWDM-SFP-1550-120 original modules. Compliant with 1000BASE-CWDM and universal SFP MSA standards, it delivers stable 120km passive transmission over standard OS2/G.652.D single-mode fiber, ideal for long-haul trunk and multi-service CWDM networking.
      Featuring ultra-low fiber attenuation and minimal chromatic dispersion. It outperforms other CWDM bands in ultra-long-distance stability, perfectly matching 1470–1610nm full-spectrum channels for complete CWDM ring network construction and fiber capacity upgrade projects.
      Pre-calibrated professional firmware ensures zero-alarm plug-and-play operation on Cisco and mainstream multi-brand devices. Supporting hot-swap and full SFF-8472 DDM real-time monitoring, our factory provides bulk wholesale, OEM logo customization, dedicated firmware modification and neutral export packaging for global system integrators and ISP operators.

Key Technical Specifications
 
Cisco Compatible CWDM-SFP-1550-120 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1550nm Max  Distance 120KM
Connector Duplex LC Transmitter Type DFB CWDM
Cable Type SMF Receiver Type APD
TX Power 0~+5dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤1W Receiver Overload -9.0dBm
Protocols IEEE 802.3z, SFF‑8472, SFP MSA, RoHS‑6, Class 1 Laser Operation Temperature 0 to 70°C (32 to 158°F)
For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Matching: Use OS2 9/125μm single-mode fiber (up to 120km). Use standard LC-UPC connectors only; LC-APC connectors are strictly prohibited.

  • Optical Attenuation (Crucial): Never direct-connect short links (<20km). If received power exceeds -9 dBm, add an inline optical attenuator (15–20 dB) at the Rx port to prevent receiver burnout.

  • Connection & Rx/Tx Check: Ensure correct Tx/Rx fiber pairing. Keep LC connector end-faces clean to avoid extra insertion loss and bit errors.

  • Link Budget: Account for total optical loss (splices, adapters, fiber distance) before deployment to stay within the 32 dB link budget.

  • Thermal Management: Operating temp: 0°C to 70°C. Avoid dense stacking of high-power 120km SFPs to prevent overheating.

  • Hot-Swapping: Supports hot-plugging. Gently insert/pull using the bail latch to protect port pins.

For detailed operation instructions, please refer to the User Guide.

Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
  • Cisco Catalyst 2960, 3560, 3750, 3850, 9200, 9300 Enterprise Switches
  • Cisco ISR 4000/4300/4400 Series Enterprise Branch Routers
  • Cisco ASR 1000 Series Aggregation Service Backbone Routers
  • Cisco Firepower Security Firewall & Access Gateway Devices
  • All Cisco devices supporting original CWDM-SFP-1550-120 transceiver modules

2. Multi-Brand Cross Compatibility

This module follows universal SFP MSA norms. It works smoothly with Huawei, H3C, Arista, Juniper, HPE, Ruijie and ZTE devices. 

3.Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility

  • Pre-bulk sample testing for project validation

  • Private label customization and deployment guides

  • Strict batch quality control

  • EEPROM configuration for legacy network environments

  • Free EEPROM recoding plus 24/7 technical support


Primary Application Scenarios

  • 120km cross-city ultra-long trunk links for ISP and telecom backbone networks
  • 1550nm core stable channel for full-band CWDM ring network expansion and upgrade
  • Long-distance cross-branch enterprise campus and park core data transmission
  • Remote base station, industrial monitoring and outdoor long-distance network extension
  • Legacy single-fiber network capacity upgrade for multi-wavelength multiplexing service expansion

1.
1G Long-Haul CWDM Direct Connection with Network Switches

1550nm 120km ultra-long point-to-point trunk link for cross-city ISP network

2. 1G CWDM Direct Connection with Mux/Demux

1550nm initial CWDM channel for full-band multi-wavelength network expansion

The Core Feature

1. Low Power & Cost-Effective Single-Fiber CWDM Solution

Adopting ultra-low-power chip design, the module power consumption is less than 1W, effectively reducing long-term network operation power costs. It supports high-efficiency single-fiber multiplexing transmission without additional EDFA amplifiers, greatly lowering the overall investment of 120km long-haul trunk projects.

1550nm low-loss initial band CWDM SFP Cisco plug and play zero-error module


2.
Verified Host Interoperability for Cisco Devices

Professionally calibrated firmware realizes zero-alarm plug-and-play recognition for Cisco devices. All modules pass strict compatibility tests with Huawei, H3C, Juniper, MikroTik and other mainstream brands, ensuring stable and error-free operation in hybrid network environments.Specific Compatibility Video available upon request.
1.25G 120km ultra-long reach CWDM transceiver with intelligent DDM diagnosis

3.Rigorous Testing, Uncompromising Reliability

Every batch of modules undergoes rigorous standardized tests, including high and low temperature cycling aging, 120km long-link stability test, optical power calibration and full DDM function verification. Strict quality control ensures consistent batch performance and long-term stable operation.
Curious how? Tour the Test Center.

HYTOPTODEVICE 1.25g sfp module cwdm 120km smf for comprehensive test


FAQ

Q1: What causes receiver burnout on 120km CWDM SFP modules?
A: Receiver burnout occurs mainly in short-distance deployment without matched attenuation. Our 1550nm 120km CWDM module features high transmit power. Direct connection within 10km produces excessive incident optical power, triggering receiver saturation and permanent component damage. Professional attenuation matching is mandatory for short-link scenarios.

Q2: What fiber attenuation standard is required for 120km CWDM module laboratory testing?
A: CWDM 120KM module features high Tx power output. A minimum of 15 dB to 20 dB fixed optical attenuator must be inserted between Tx and Rx during bench testing to prevent receiver damage and avoid irreversible module failure caused by over-power signal impact.

Q3: What laser technology is used in 1.25G 120km CWDM SFP transceivers?
A: Our 1550nm long-haul CWDM modules adopt industrial-grade DFB distributed feedback laser chips. This mature core technology delivers stable wavelength output, ultra-low dispersion and high optical power, ensuring consistent signal integrity for 120km ultra-long transmission and supporting 24/7 continuous industrial operation.

Q4: Why is G.652.D fiber required instead of G.652.A/B for 120km CWDM links?
A: Outdated G.652.A/B fiber has higher attenuation and poor dispersion control. Over 120km long spans, excessive fiber loss consumes all power budget, causing packet loss and link instability. G.652.D low-loss fiber provides optimized transmission performance, fully meeting 120km passive long-haul CWDM transmission requirements.

Q5: Can 1.25G 120km CWDM SFP modules work with all standard SFP slots?
A: Yes. All our CWDM SFP modules comply with universal SFP MSA physical and electrical standards. Standard pin definition and size enable seamless plug-and-play with all mainstream standard SFP slots without hardware modification or complex configuration.

Q6: Are 120km CWDM SFPs compatible with Cisco, Huawei, Juniper and MikroTik?
A: Fully multi-brand compatible. Pre-programmed dedicated firmware ensures zero-alarm and zero-error operation on Cisco, Huawei, Juniper, MikroTik and other mainstream network devices. All modules pass real-machine testing to adapt to mixed-brand network deployment scenarios.

Q7: How much power does a 1.25G 120km CWDM SFP module consume?
A: Adopting optimized low-power chip architecture, the module’s overall power consumption is below 1W. The energy-saving design effectively reduces long-term operational electricity costs, making it highly cost-effective for large-scale batch deployment in ISP and enterprise networks.

Q8: How does ambient heat affect CWDM laser wavelength stability?
A: High ambient temperature will cause slight laser wavelength drift, which affects multiplexing accuracy in dense CWDM networking. Our modules undergo strict high and low temperature aging calibration during production, effectively suppressing wavelength drift and maintaining stable 1550nm wavelength output in complex temperature environments.

Q9: Why do OTDR tests show high-loss points on long CWDM fiber spans?
A: Abnormal high-loss points on OTDR traces are mainly caused by non-standard fiber splicing, dirty/loose connectors, aging fiber links or mismatched CWDM channel parameters. Accumulated insertion and attenuation losses consume link power budget, resulting in unstable long-haul transmission.

Q10: Can EDFA amplifiers extend the transmission distance of 120km CWDM modules?
A: No. Standard EDFAs only amplify the C-band (approx. 1530nm–1565nm). They cannot amplify wider CWDM wavelengths (e.g., 1470nm, 1610nm). Extending transmission distance beyond 120km requires professional DWDM technology. HYTOPTODEVICE's high-power 1550nm modules support pure passive 120km transmission without amplifiers, ensuring cleaner, more reliable and cost-effective links.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

  • HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center

Download