• HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center
  • HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center

Cisco CWDM-SFP-1470-120 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1470nm 120km Bulk Factory Wholesale | HYTOPTODEVICE

Factory direct Cisco CWDM-SFP-1470-120 compatible 1.25G CWDM SFP transceiver. 1000BASE-CWDM 1470nm low-loss initial wavelength, 120km ultra-long stable transmission over OS2 single-mode fiber. Pre-programmed zero-error firmware for all Cisco switches and routers. Built-in DDM real-time diagnosis. Bulk factory wholesale for long-distance ISP trunk and cross-region enterprise networking. Private label, custom EEPROM Programming and OEM available.
NO. Brand  Compatible P/N Remarks
1 Cisco CWDM-SFP-1470-120
2 Cisco CWDM-SFP-1490-120
3 Cisco CWDM-SFP-1510-120
4 Cisco CWDM-SFP-1530-120
5 Cisco CWDM-SFP-1550-120
6 Cisco CWDM-SFP-1570-120
7 Cisco CWDM-SFP-1590-120
8 Cisco CWDM-SFP-1610-120
Description

Cisco CWDM-SFP-1470-120 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1470nm 120km Bulk Factory Wholesale

Product Overview

This 1.25G 1470nm 120km CWDM SFP fully replaces the Cisco CWDM-SFP-1470-120. It complies with 1000BASE-CWDM and SFP MSA standards. It delivers stable 120km gigabit transmission via standard OS2 single-mode fiber.
1470nm is the foundational wavelength of standard CWDM bands. It features ultra-low fiber attenuation and slight dispersion. It offers strong signal penetration for ultra-long links. It is ideal for full-band CWDM networking and long-haul trunk transmission.
Custom Cisco EEPROM firmware ensures zero alarms and zero port errors. It supports hot-swap and SFF-8472 DDM monitoring. We support bulk ordering, OEM customization and personalized custom services. Available services include private logo printing, exclusive firmware tuning and neutral packaging. It meets diverse procurement and brand customization needs.

Key Technical Specifications
 
Cisco Compatible CWDM-SFP-1470-120 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1470nm Max  Distance 120KM
Connector Duplex LC Transmitter Type DFB CWDM
Cable Type SMF Receiver Type APD
TX Power 0~+5dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤1W Receiver Overload -9.0dBm
Protocols IEEE 802.3z, SFF‑8472, SFP MSA, RoHS‑6, Class 1 Laser Operation Temperature 0 to 70°C (32 to 158°F)
For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Matching: Use OS2 9/125μm single-mode fiber (up to 120km). Use standard LC-UPC connectors only; LC-APC connectors are strictly prohibited.

  • Optical Attenuation (Crucial): Never direct-connect short links (<20km). If received power exceeds -9 dBm, add an inline optical attenuator (15–20 dB) at the Rx port to prevent receiver burnout.

  • Connection & Rx/Tx Check: Ensure correct Tx/Rx fiber pairing. Keep LC connector end-faces clean to avoid extra insertion loss and bit errors.

  • Link Budget: Account for total optical loss (splices, adapters, fiber distance) before deployment to stay within the 32 dB link budget.

  • Thermal Management: Operating temp: 0°C to 70°C. Avoid dense stacking of high-power 120km SFPs to prevent overheating.

  • Hot-Swapping: Supports hot-plugging. Gently insert/pull using the bail latch to protect port pins.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
  • Cisco Catalyst 2960, 3560, 3750, 3850, 9200, 9300 Series Switches
  • Cisco ISR 4000/4300/4400 Series Enterprise Routers
  • Cisco ASR 1000 Series Aggregation Service Routers
  • Cisco Firepower Security Firewall Devices
  • All Cisco devices supporting original CWDM-SFP-1470-120 modules

2. Multi-Brand Cross Compatibility

This module follows universal SFP MSA norms. It works smoothly with Huawei, H3C, Arista, Juniper, HPE, Ruijie and ZTE devices. 

3.Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility

  • Pre-bulk sample testing for project validation

  • Private label customization and deployment guides

  • Strict batch quality control

  • EEPROM configuration for legacy network environments

  • Free EEPROM recoding plus 24/7 technical support

Primary Application Scenarios

  • 120km ultra-long point-to-point trunk links for cross-city and suburban ISP backbone networks
  • 1470nm foundational initial channel deployment for full-band CWDM ring network construction
  • Ultra-long distance core service transmission for large enterprise cross-branch interconnection
  • Remote base station, monitoring station and industrial park wide-range network extension
  • Legacy fiber network capacity upgrade to realize multi-service multiplexing transmission

Connectivity Solutions(Applications)

1.
1G Long-Haul CWDM Direct Connection with Network Switches

1470nm 120km ultra-long point-to-point trunk link for cross-city ISP network

2. 1G CWDM Direct Connection with Mux/Demux

1470nm initial CWDM channel for full-band multi-wavelength network expansion

The Core Feature

1. Low Power & Cost-Effective Single-Fiber CWDM Solution

<1W low power design cuts operational cost. Supports efficient single-fiber CWDM transmission. No extra amplifier needed, ideal for cost-saving 120km trunk networking.

1470nm low-loss initial band CWDM SFP Cisco plug and play zero-error module


2.
Verified Host Interoperability for Cisco Devices

Cisco zero-alarm plug-and-play. Fully tested for Huawei, H3C, Ruijie and ZTE. Stable interoperability for multi-brand network environments.Specific Compatibility Video available upon request.
1.25G 120km ultra-long reach CWDM transceiver with intelligent DDM diagnosis

3.Rigorous Testing, Uncompromising Reliability

Each module passes strict tests: temperature cycling, 120km link testing, optical power stability and DDM verification. Ensures consistent batch quality and 24/7 stable operation.Curious how? Tour the Test Center.



FAQ

1: What optical power budget does this 120km 1.25G CWDM SFP support?
A: This 1470nm long-haul module provides a 26–28dB high power budget. It fully covers daily link losses like fiber attenuation, splicing joints and device insertion loss, ensuring stable 120km full-distance transmission margin.

Q2: Can this 120km CWDM module run 120km links without EDFA amplifiers?
A: Yes. Equipped with high-power laser and high-sensitivity receiver, it supports pure passive 120km fiber transmission. No optical amplifier is required, greatly simplifying network deployment and reducing engineering costs.

Q3: Which CWDM wavelengths are suitable for 120km ultra-long transmission?
A: All long-wave CWDM bands from 1470nm to 1610nm are applicable. These wavelengths feature ultra-low fiber attenuation and minor dispersion, far more stable than short-wave bands for 120km long-haul networking.

Q4: Will chromatic dispersion affect 1.25G signal quality at 120km?
A: No obvious impact. 1.25G low-rate gigabit signals have strong anti-dispersion performance. The 1470nm low-distortion wavelength further guarantees error-free and distortion-free long-distance transmission.

Q5: Is DDM function necessary for 120km long-haul CWDM modules?
A: It is essential for long-distance links. DDM real-time monitoring tracks optical power, temperature and operating voltage remotely. It supports pre-fault judgment and rapid maintenance for hard-to-access remote trunk links.

Q6: What is the ideal Rx power range for stable 120km link operation?
A: The optimal receiving power range is -10dBm to -25dBm. This interval avoids signal saturation and sensitivity insufficiency, effectively preventing link jitter and packet loss for long-haul services.

Q7: What temperature grades do 120km CWDM SFPs offer?
A: Two standard grades are available. Commercial grade (0°C~70°C) applies to indoor equipment rooms; industrial grade (-40°C~85°C) adapts to extreme outdoor and roadside harsh environments.

Q8: Why use industrial-grade modules for roadside long-haul installations?
A: Roadside sites suffer from extreme temperature swings and high humidity. Industrial-grade modules maintain stable laser wavelength and output power, avoiding intermittent link dropouts caused by environmental temperature changes.

Q9: What is the leading cause of 120km CWDM link failure?
A: Insufficient residual optical power margin is the main cause. Long-term fiber aging, excessive splicing points and accumulated device loss continuously consume budget, resulting in signal instability and eventual link downtime.

Q10: How to troubleshoot a down 120km CWDM link efficiently?
A: Check DDM operating data for abnormal attenuation first. Confirm the use of standard OS2 low-loss fiber. Verify reasonable attenuator matching for short links, and clean port connectors to eliminate poor contact faults.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

  • HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center

Download