• Cisco C57 DWDM‑SFP‑3190‑160 Compatible 1.25G DWDM pluggable transceiver | 1000BASE-DWDM 1531.90nm 160km 100GHz | HYTOPTODEVICE
  • Cisco C57 DWDM‑SFP‑3190‑160 Compatible 1.25G DWDM pluggable transceiver | 1000BASE-DWDM 1531.90nm 160km 100GHz | HYTOPTODEVICE
  • hytoptodevice compatible 120km long-haul DWDM pluggable transceiver with DDM monitoring
  • Bulk buy Cisco compatible DWDM pluggable transceiver HYTOPTODEVICE
  • Cisco C57 DWDM‑SFP‑3190‑160 Compatible 1.25G DWDM pluggable transceiver | 1000BASE-DWDM 1531.90nm 160km 100GHz | HYTOPTODEVICE
  • Cisco C57 DWDM‑SFP‑3190‑160 Compatible 1.25G DWDM pluggable transceiver | 1000BASE-DWDM 1531.90nm 160km 100GHz | HYTOPTODEVICE
  • hytoptodevice compatible 120km long-haul DWDM pluggable transceiver with DDM monitoring
  • Bulk buy Cisco compatible DWDM pluggable transceiver HYTOPTODEVICE

Cisco C57 DWDM‑SFP‑3190‑160 Compatible 1.25G DWDM pluggable transceiver | 1000BASE-DWDM 1531.90nm 160km 100GHz | HYTOPTODEVICE

Highly compatible Cisco C57 1.25G DWDM pluggable transceiver replaces original DWDM‑SFP‑3190‑160 modules. Standard 1531.90nm wavelength with 100GHz ITU grid spacing delivers stable 160km single-mode fiber transmission. Factory-calibrated pluggable transceiver for carrier-grade DWDM multiplexing, enterprise long-haul links and large-scale bulk network procurement. Support bulk wholesale, private label and custom EEPROM programming for global importers, distributors and system integrators.
 CH Cisco Compatible P/N Remark
CH50 DWDM‑SFP‑3740‑160
CH51 DWDM‑SFP‑3661‑160
CH52 DWDM‑SFP‑3582‑160  
CH53 DWDM‑SFP‑3504‑160  
CH54 DWDM‑SFP‑3425‑160
CH55 DWDM‑SFP‑3347‑160
CH56 DWDM‑SFP‑3268‑160
CH57 DWDM‑SFP‑3190‑160
CH58 DWDM‑SFP‑3112‑160
CH59 DWDM‑SFP‑3033‑160
CH60 DWDM‑SFP‑2955‑160
CH61 DWDM‑SFP‑2877‑160
Description

Cisco C57 DWDM‑SFP‑3190‑160 Compatible 1.25G DWDM Optical Transceiver | 1000BASE-DWDM 1531.90nm 160km 100GHz | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 1.25G DWDM pluggable transceiver is a fully drop-in replacement for Cisco DWDM‑SFP‑3190‑160. Calibrated to 1531.90nm C57 ITU channel with 100GHz spacing, it delivers stable 160km error-free transmission over G.652.D single-mode fiber, suitable for dense DWDM multiplexing networks.
Equipped with TEC wavelength locking and high-sensitivity APD receiver, this hot-swappable transceiver suppresses wavelength drift and channel crosstalk. Built with SFF-8472 DDM real-time monitoring and strictly factory tested, it features zero-alarm Cisco compatibility and stable performance for telecom and enterprise long-haul network deployment.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-3190-160 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1531.90nm Max  Distance 160KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type APD
TX Power 2~+6dBm Receiver Sensitivity < -34.0dBm
Power Consumption ≤2W Receiver Overload -10.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +6 dBm, install a 20–25 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -10 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a APD receiver (sensitivity ~ -34dBm,36 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Pre‑tuned EEPROM firmware ensures this DWDM pluggable transceiver is recognized without alarms. Hot‑swap safe on Cisco Catalyst, ISR, ASR, ONS and ME series hardware for direct replacement of original DWDM‑SFP‑3190‑160.
  • Cisco Catalyst 3560 / 3750 / 3850 / 9000 Series Switches
  • Cisco ISR 1900 / 2900 / 3900 Service Routers
  • Cisco ASR 1000 Aggregation Routers
  • Cisco ONS 15310 / 15454 Optical Transport Systems
  • Cisco ME Metro Access Switches

2. Multi-Brand Cross Compatibility

Built to MSA standards, this pluggable transceiver works across multiple network brands. Custom EEPROM flashing available for special host hardware when placing bulk orders.
  • Huawei, H3C, Juniper, ZTE enterprise routing & switching platforms
  • MikroTik and other carrier‑grade optical transmission equipment

3. Free Value-Added Services

We offer exclusive free value-added services for all  DWDM pluggable transceivers  to reduce your project deployment and maintenance costs.
  • Free custom EEPROM programming for special and legacy network environments
  • Lifelong free firmware refitting and version upgrade
  • Free pre-sales link budget calculation and loss evaluation
  • Free batch testing report and product qualification documents

Primary Application Scenarios

  • Metro DWDM wavelength expansion deploying 1.25G pluggable transceiver 160km links
  • Service‑provider fiber backhaul with MUX/DEMUX and pluggable transceiver modules
  • Cross‑city enterprise private network interconnection over single‑mode fiber
  • Data‑center remote aggregation using 100GHz ITU‑T pluggable transceiver channels
  • Industrial and smart‑city long‑distance optical transmission projects
  • Hardware refresh replacing end‑of‑life Cisco DWDM pluggable transceiver inventory

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Pair the pluggable transceiver with DWDM multiplexers to carry multiple wavelengths over one fiber pair, saving fiber resources for campus and metro aggregation.



2. 120km Long-Haul DWDM Solution

Combine this pluggable transceiver with EDFA amplifiers to offset fiber attenuation, achieving reliable 120km error‑free transmission for backbone‑class links.


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Power draw below 2W supports non‑stop 24×7 operation, lowering rack heat load and operational power cost for data‑center and telecom room deployments.

HYTOPTODEVICE low power DWDM optical transceiver, energy efficient data center network connectivity


2.
Verified Host Interoperability for Cisco Devices

Each unit undergoes real‑hardware validation on Cisco platforms. Hot‑plug capable with zero‑alarm recognition for straightforward drop‑in replacement.
HYTOPTODEVICE multi‑brand compatible optical transceiver module, fully verified network host interoperability

3.Rigorous Testing, Uncompromising Reliability

Wavelength calibration, optical power sorting, high‑temperature aging, 160km stress testing and DDM verification guarantee uniform quality for project‑scale roll‑outs.

HYTOPTODEVICE full tested carrier grade optical transceiver module, high stability long haul optical equipment


FAQ

Q1: Does this C57 DWDM pluggable transceiver have built-in auto-shutdown or over-power protection for its APD receiver?
A: Most standard DWDM/SFP transceivers lack built-in optical attenuation and mechanical over-power protection, relying on external attenuators and network design only. Our HYTOPTODEVICE transceiver adds independent circuit-level APD over-power protection for safer long-term bulk operation.

Q2: What network issues occur when input optical power drops close to the APD receiver threshold?
A: When Rx power approaches the APD threshold, bit error rate rises, causing frame loss, intermittent link flapping or LOS outage. Our modules reserve sufficient power margin to avoid such long-haul link failures.

Q3: Are Dispersion Compensation Modules required for 1.25G 160km DWDM transmission links?
A: No DCM dispersion compensation modules are required for standard 160km transmission. Built-in dispersion suppression design offsets G.652.D fiber dispersion, simplifying deployment and reducing extra costs.

Q4: How stable is the 1531.90nm wavelength output of this pluggable transceiver under temperature changes?
A: Integrated high-precision TEC chips stabilize 1531.90nm wavelength across 0°C–70°C operating temperature. Wavelength deviation is controlled within ±0.1nm to avoid crosstalk in 100GHz DWDM systems.

Q5: What risks arise if transceiver wavelength drifts away from standard ITU grid specifications?
A: Wavelength drift off ITU grid causes channel crosstalk, signal attenuation and high bit error rates, even sudden link outages. All our modules are precisely calibrated to meet standard ITU grid specifications.

Q6: Is on-site firmware reprogramming supported for this multi-brand compatible pluggable transceiver?
A: Yes, this universal DWDM transceiver supports on-site EEPROM reprogramming and parameter adjustment to solve multi-brand device adaptation for customized network deployment and batch upgrades.

Q7: How accurate is the real-time Rx power monitoring data from the integrated APD receiver?
A: The built-in APD receiver delivers high-precision Rx power monitoring with ±1dBm error tolerance, helping engineers quickly locate link attenuation, fiber joint and signal stability faults.

Q8: Can DDM monitoring trigger early alarms before complete link outage happens?
A: Yes, the DDM monitoring system supports customizable threshold alarms. It actively detects power, temperature and voltage anomalies to trigger early warnings and prevent sudden full link outages.

Q9: Will module power consumption cause port overheating on high-density enterprise switches?
A: No overheating risk. With power consumption below 2W, this low-heat transceiver adapts to high-density switch slots, avoiding heat accumulation and equipment performance degradation.

Q10: Why are APD-based pluggable transceivers more precise than traditional PIN-based modules?
A: APD-based transceivers feature higher receiving sensitivity and long-distance signal restoration than PIN modules. Strict component calibration and environmental tolerance standards make them more precise for 160km long-haul transmission.

Q11: Why are 160km DWDM pluggable transceivers more costly than standard short-range optical modules?
A: 160km DWDM modules adopt high-grade TEC wavelength locking and APD receivers, with strict long-distance aging tests to resist complex transmission interference. Higher production standards ensure superior stability than short-range modules.

Q12: What causes DWDM link downtime when Tx power displays normally on both ends?
A: Normal Tx power cannot guarantee intact links. Common hidden faults include excessive link attenuation, dirty fiber connectors, subtle wavelength drift and APD receiver faults. Our DDM monitoring quickly locates these hidden failures.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • Cisco C57 DWDM‑SFP‑3190‑160 Compatible 1.25G DWDM pluggable transceiver | 1000BASE-DWDM 1531.90nm 160km 100GHz | HYTOPTODEVICE
  • Cisco C57 DWDM‑SFP‑3190‑160 Compatible 1.25G DWDM pluggable transceiver | 1000BASE-DWDM 1531.90nm 160km 100GHz | HYTOPTODEVICE
  • hytoptodevice compatible 120km long-haul DWDM pluggable transceiver with DDM monitoring
  • Bulk buy Cisco compatible DWDM pluggable transceiver HYTOPTODEVICE

Download