• hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Cisco C52 DWDM‑SFP‑3582‑80 Compatible 1.25G DWDM SFP Transceiver Module | 1000BASE-DWDM 1535.82nm 80km 100GHz | HYTOPTODEVICE

Source Cisco C52 DWDM‑SFP‑3582‑80 compatible 1.25G 1000BASE‑DWDM SFP transceiver running on 1535.82nm ITU‑T 100GHz grid, 80km reach across G.652.D single‑mode fiber. In‑stock DWDM optical hardware built for optical integrators and telecom project vendors. TEC‑stabilized cooled DFB laser, full SFF‑8472 DOM diagnostic capability, custom EEPROM profile coding available, support pre‑delivery sample verification and large‑volume bulk sourcing for metro DWDM transport deployments.
CH Cisco Compatible P/N  CH Cisco Compatible P/N
CH37 DWDM‑SFP‑4772‑80 CH50 DWDM‑SFP‑3740‑80
CH38 DWDM‑SFP‑4692‑80 CH51 DWDM‑SFP‑3661‑80
CH39 DWDM‑SFP‑4612‑80 CH52 DWDM‑SFP‑3582‑80
CH40 DWDM‑SFP‑4532‑80 CH53 DWDM‑SFP‑3504‑80
CH41 DWDM‑SFP‑4453‑80 CH54 DWDM‑SFP‑3425‑80
CH42 DWDM‑SFP‑4373‑80 CH55 DWDM‑SFP‑3347‑80
CH43 DWDM‑SFP‑4294‑80 CH56 DWDM‑SFP‑3268‑80
CH44 DWDM‑SFP‑4214‑80 CH57 DWDM‑SFP‑3190‑80
CH45 DWDM‑SFP‑4135‑80 CH58 DWDM‑SFP‑3112‑80
CH46 DWDM‑SFP‑4056‑80 CH59 DWDM‑SFP‑3033‑80
CH47 DWDM‑SFP‑3977‑80 CH60 DWDM‑SFP‑2955‑80
CH48 DWDM‑SFP‑3898‑80 CH61 DWDM‑SFP‑2877‑80
CH49 DWDM‑SFP‑3819‑80 CH62
Description

Cisco C52 DWDM‑SFP‑3582‑80 Compatible 1.25G DWDM SFP Transceiver Module | 1000BASE‑DWDM 1535.82nm 80km Bulk Wholesale

Product Overview

HYTOPTODEVICE C52 DWDM SFP is drop‑in replacement for Cisco DWDM‑SFP‑3582‑80, ITU‑T 100GHz grid 1535.82nm, delivers error‑free 80km transmission on G.652.D single‑mode fiber. Widely used by optical integrators and telecom vendors for metro DWDM backbone build‑out and live network capacity expansion.
Adopts TEC‑cooled DFB laser for precise wavelength control and low inter‑channel crosstalk under dense multiplexing. Max power consumption<2W. Factory‑tuned Cisco‑compatible EEPROM avoids unrecognized‑transceiver alarms on hot‑swap. Built‑in SFF‑8472 DOM enables real‑time optical monitoring during commissioning and daily maintenance. Support qualification sample and high‑volume bulk orders.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-3582-80 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1535.82nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type PIN
TX Power 0~+5dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤2W Receiver Overload -3.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 10–15 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -3 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a PIN receiver (sensitivity ~ -24 dBm, 24 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Custom Cisco‑specific EEPROM signature eliminates alarms and port lockdown. No extra configuration or firmware upgrade is required for plug‑and‑play deployment across supported Cisco enterprise and carrier‑grade hardware.

Fully Compatible Cisco Platforms:
  • Cisco Catalyst 3850, 9200, 9300 Series enterprise switches
  • Cisco ISR 4000‑series multi‑service branch routers
  • Cisco ASR 1000‑series carrier backbone routers
  • Cisco ONS optical transport platforms supporting 100GHz DWDM SFP
  • All Cisco devices accepting original DWDM‑SFP‑3582‑80 transceivers

2. Multi-Brand Cross Compatibility

Compliant with universal SFP MSA specifications, this C52 DWDM SFP runs error‑free on Huawei, H3C, Juniper, MikroTik and other mainstream network hardware. Custom firmware adaptation is available for complex multi‑vendor DWDM environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

• Metro DWDM Ring: Dedicated C52 wavelength realizes single-fiber multiplexing to reduce carrier fiber investment
• Wireless Cell Backhaul: Passive 80km gigabit connectivity lowers remote site operation expenses
• Enterprise Cross-Branch: Low-cost private fiber for inter-office data & real-time video transmission
• MAN Service Aggregation: Isolated wavelengths avoid service cross-interference and boost network stability
• Industrial IoT Monitoring: Anti-interference optical design for long-distance smart city & factory data links
• Legacy Network Upgrade: Add C-band wavelengths without full infrastructure overhaul

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Pair C52 module with standard DWDM multiplexers & demultiplexers to carry multi-service signals on single fiber, simplify field wiring for medium-short gigabit spans.



2. 80km Long-Haul DWDM Solution

Match EDFA optical amplifiers to offset natural fiber attenuation, stabilizing DWDM signal for intercity carrier core backhaul networks.


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Ultra-low power design reduces power consumption and heat generation. The optimized single-fiber structure simplifies data center cabling, enabling cost-effective and stable gigabit Ethernet transmission.

1G Data Center Connectivity low power single-fiber Gigabit Ethernet DWDM SFP solution


2.
Verified Host Interoperability for Cisco Devices

Calibrated firmware supports zero-alarm plug-and-play for Huawei, Cisco and other mainstream devices. It solves multi-brand compatibility problems and adapts to hybrid network deployment.
Verified multi-vendor interoperability for  Cisco  DWDM SFP transceiver

3.Rigorous Testing, Uncompromising Reliability

Integrating precise wavelength locking, stable 80km long-haul transmission and multi-scenario adaptability, this module forms a complete gigabit DWDM solution. It fully meets diversified networking demands for carrier metro backhaul and enterprise long-distance interconnection.

Comprehensive 1.25G 80km C17 DWDM networking solution for carrier and enterprise deployment


FAQ

Q1: Will third‑party compatible DWDM SFP void original device warranty?
A: MSA‑compliant transceivers will not void host‑device warranty in most regions. We provide free EEPROM tuning to eliminate OEM lock‑in warning alerts for tender projects.

Q2: Can you pre‑code for legacy special‑spec network hardware?
A: Yes. Provide hardware model details, we finish custom EEPROM within 1 business day with full project‑order technical support.

Q3: How about cross‑hardware interoperability for bulk tender bids?
A: Strict SFP MSA compliance, stable interoperability across mainstream brand network equipment for large‑batch project supply.

Q4: What is the link budget for 80km deployment?
A: Total 24dB link budget based on 0~+5dBm transmit power and ‑24dBm receiver sensitivity for standard G.652.D fiber.

Q5: Does TEC‑cooled module keep stable wavelength for multi‑year operation?
A: On‑board TEC plus factory wavelength calibration suppress long‑term drift and maintain 100GHz channel spacing for continuous operation.

Q6: How to handle excessive insertion loss from MUX/DEMUX?
A: When total link loss exceeds margin, deploy EDFA amplifier to restore signal amplitude.

Q7: Minimum unamplified fiber span? Need attenuator for short links?
A: Minimum unamplified distance 15km. For shorter links, apply 10‑15dB fixed optical attenuator to prevent receiver saturation and port damage.

Q8: Any surge protection for telecom rack environment?
A: Built‑in ESD and surge protection, enhances long‑term reliability for high‑density telecom rack deployment.

Q9: Why TEC thermal stabilization is critical in dense DWDM metro network?
A: Temperature variation shifts laser wavelength. TEC locks 1535.82nm ITU‑T channel and reduces inter‑channel crosstalk.

Q10: Risk of operating beyond rated temperature?
A: Over‑temperature causes wavelength offset, higher BER and accelerated laser aging. Use rack cooling or select industrial‑grade variant for high‑temperature sites.

Q11: How to read real‑time DOM diagnostic data?
A: Check transmit power, receive power, module temperature and voltage via switch CLI transceiver commands or web management, no extra third‑party software required.

Q12: Package for bulk tender cross‑border shipment?
A: Each unit passes optical performance test, fitted with LC dust cap, anti‑static moisture‑proof bag with foam padding for international project delivery.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Download