• Cisco C30 DWDM‑SFP‑5333‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1553.33nm 100km 100GHz | HYTOPTODEVICE
  • HYTOPTODEVICE hot pluggable DWDM SFP transceiver module, gigabit network upgrade optical module
  • HYTOPTODEVICE high sensitivity APD DWDM transceiver module, carrier grade long haul optical transceiver
  • HYTOPTODEVICE bulk supply DWDM transceiver module, DDM monitoring gigabit telecom optical module
  • Cisco C30 DWDM‑SFP‑5333‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1553.33nm 100km 100GHz | HYTOPTODEVICE
  • HYTOPTODEVICE hot pluggable DWDM SFP transceiver module, gigabit network upgrade optical module
  • HYTOPTODEVICE high sensitivity APD DWDM transceiver module, carrier grade long haul optical transceiver
  • HYTOPTODEVICE bulk supply DWDM transceiver module, DDM monitoring gigabit telecom optical module

Cisco C50 DWDM‑SFP‑3740‑100 Compatible 1.25G DWDM Fiber Transceiver | 1000BASE-DWDM 1537.40nm 100km 100GHz | HYTOPTODEVICE

Source premium Cisco C50 compatible 1.25G DWDM fiber transceiver from HYTOPTODEVICE. Standard 1537.40nm 100GHz ITU grid, 100km single-mode long-haul transmission, MSA-certified plug-and-play module. Cost-effective bulk solutions for Cisco network upgrades, metro DWDM expansion and telecom backbone transmission projects. 
CHANEL Cisco Compatible P/N  CHANEL Cisco Compatible P/N
CH30 DWDM‑SFP‑5333‑100 CH46 DWDM‑SFP‑4056‑100
CH31 DWDM‑SFP‑5252‑100 CH47 DWDM‑SFP‑3977‑100
CH32 DWDM‑SFP‑5172‑100 CH48 DWDM‑SFP‑3898‑100
CH33 DWDM‑SFP‑5092‑100 CH49 DWDM‑SFP‑3819‑100
CH34 DWDM‑SFP‑5012‑100 CH50 DWDM‑SFP‑3740‑100
CH35 DWDM‑SFP‑4932‑100 CH51 DWDM‑SFP‑3661‑100
CH36 DWDM‑SFP‑4851‑100 CH52 DWDM‑SFP‑3582‑100
CH37 DWDM‑SFP‑4772‑100 CH53 DWDM‑SFP‑3504‑100
CH38 DWDM‑SFP‑4692‑100 CH54 DWDM‑SFP‑3425‑100
CH39 DWDM‑SFP‑4612‑100 CH55 DWDM‑SFP‑3347‑100
CH40 DWDM‑SFP‑4532‑100 CH56 DWDM‑SFP‑3268‑100
CH41 DWDM‑SFP‑4453‑100 CH57 DWDM‑SFP‑3190‑100
CH42 DWDM‑SFP‑4373‑100 CH58 DWDM‑SFP‑3112‑100
CH43 DWDM‑SFP‑4294‑100 CH59 DWDM‑SFP‑3033‑100
CH44 DWDM‑SFP‑4214‑100 CH60 DWDM‑SFP‑2955‑100
CH45 DWDM‑SFP‑4135‑100 CH61 DWDM‑SFP‑2877‑100
Description

Cisco C50 DWDM‑SFP‑3740‑100 Compatible 1.25G DWDM Fiber Transceiver | 1000BASE-DWDM 1537.40nm 100km 100GHz | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE C50 DWDM SFP fiber transceiver serves as a fully compatible plug-and-play replacement for Cisco DWDM-SFP-3740-100. Calibrated to standard 1537.40nm wavelength on the 100GHz ITU-T grid, this 1.25G fiber transceiver delivers stable, error-free transmission up to 100km over G.652.D single-mode fiber. It is an economical bulk procurement option for Cisco device upgrades, metro DWDM wavelength expansion and legacy optical module batch replacement.
Equipped with high-precision TEC wavelength locking and high-sensitivity APD receiver, this carrier-grade transceiver effectively suppresses adjacent channel crosstalk in dense DWDM systems. Ultra-low power consumption reduces long-term operational heat and energy costs. Pre-flashed EEPROM enables alarm-free hot-swap deployment, while built-in DDM supports real-time operational diagnosis. Every C50 fiber transceiver undergoes strict optical calibration and 72-hour aging testing to ensure consistent batch quality for large-scale network deployments. Bulk wholesale, private label, custom EEPROM programming and OEM available for global importers, distributors and system integrators.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-3740-100 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1537.40nm Max  Distance 100KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type APD
TX Power 0~+5dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤2W Receiver Overload -9.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 15–20 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -9 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a APD receiver (sensitivity ~ -32dBm,32 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
This C50 DWDM transceiver module runs with zero alarms and full firmware adaptation on the following Cisco hardware platforms:
  • Cisco Catalyst 2960 / 3560 / 3750 / 3850 / 9200 / 9300 Series Switches
  • Cisco ISR 1900 / 2900 / 3900 Series Integrated Service Routers
  • Cisco ASR 1000 Series Aggregation Service Routers
  • Cisco ONS 15454 / 15310 Optical Transport Platforms
  • Cisco ME 3400 / 3600 / 3800 Metro Ethernet Switches

2. Multi-Brand Cross Compatibility

This DWDM transceiver module complies with MSA standards and passes full interoperability tests. It runs stably on mainstream multi-brand network devices with no packet loss or link flapping.
  • Huawei AR / CE / S Series Switches & Routers
  • H3C S / ER / MSR Series Network Devices
  • Juniper EX / MX Series Routing & Switching Platforms
  • ZTE, MikroTik, TP-Link Enterprise-Grade Network Equipment

3. Free Value-Added Services

We offer exclusive free value-added services for all C50 DWDM transceiver modules to reduce your project deployment and maintenance costs.
  • Free custom EEPROM programming for special and legacy network environments
  • Lifelong free firmware refitting and version upgrade
  • Free pre-sales link budget calculation and loss evaluation
  • Free batch testing report and product qualification documents

Primary Application Scenarios

  • 100km long-haul metro DWDM network construction and fiber capacity expansion
  • Telecom base station backhaul and long-distance gigabit optical transmission
  • Cross-city private network interconnection for enterprises and operators
  • Multi-service signal aggregation with 100GHz DWDM MUX/DEMUX devices
  • Smart city and industrial long-distance optical link deployment
  • Existing DWDM network wavelength expansion and old module replacement

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Pair this DWDM transceiver module with 100GHz MUX/DEMUX to aggregate multiple services on one fiber pair. It saves fiber resources and simplifies wiring for metro DWDM deployment.

HYTOPTODEVICE DWDM fiber connectivity solution, multi‑service network aggregation solution

2. 100km Long-Haul DWDM Solution

Match the transceiver module with EDFA amplifiers to compensate fiber attenuation, stabilize optical signals and eliminate long-distance distortion, ensuring reliable 100km backbone transmission.

HYTOPTODEVICE long haul optical transmission solution, EDFA amplified DWDM network deployment


The Core Feature

1. Low-Power Data Center Efficient Connectivity

This DWDM transceiver module consumes less than 2W power, reducing equipment heat and energy loss. It supports stable, energy-efficient long-distance interconnection for data centers and metro backbone networks.

HYTOPTODEVICE low power DWDM transceiver module, energy efficient data center network connectivity


2.
Verified Host Interoperability for Cisco Devices

Pre-programmed firmware ensures full multi-brand compatibility. Hot-swap plug-and-play design realizes zero-alarm and zero-configuration deployment without link conflicts.
HYTOPTODEVICE multi‑brand compatible optical transceiver, fully verified network host interoperability

3.Rigorous Testing, Uncompromising Reliability

Every transceiver module undergoes strict factory calibration, wavelength inspection, crosstalk test and 72-hour aging screening. Rigorous testing guarantees stable batch performance for bulk projects.

HYTOPTODEVICE full tested carrier grade transceiver module, high stability long haul optical equipment


FAQ

Q1: Can the C50 DWDM module adapt to customized industrial network deployment environments?
A: This C50 DWDM fiber transceiver supports targeted EEPROM and firmware customization for personalized industrial network setups and non-standard host devices. We adjust internal identification protocols to resolve compatibility failures, enabling stable operation on special network hardware that standard modules cannot support.

Q2: What standard ensures multi-device interoperability of your gigabit DWDM modules?
A: All our 1.25G 100km DWDM transceivers are manufactured per unified MSA international specifications. Standardized mechanical dimensions, electrical pin layouts and optical parameters ensure seamless cross-brand interoperability for mixed-vendor network deployment.

Q3: How to professionally validate 100km DWDM link stability after module installation?
A: After deploying the C50 transceiver, field technicians can verify link quality via continuous bandwidth pressure testing, real-time optical power trend monitoring and full-cycle error code detection, ensuring the long-haul link meets professional network delivery and operational standards.

Q4: Does intermittent fiber disconnection affect DWDM module service lifespan?
A: Built-in intelligent laser protection circuits prevent instant chip damage during fiber disconnection. However, frequent or long-term unloaded laser emission will accelerate internal component aging, gradually shortening the overall service life of the transceiver.

Q5: What transmission issues arise from excessive operating temperatures?
A: Operating beyond the rated temperature range will offset precise wavelength locking, causing signal jitter and increased bit errors in DWDM multiplexing links. Severe overheating triggers automatic power-off protection to avoid permanent core component damage.

Q6: Are these DWDM modules suitable for long-term uninterrupted data center operation?
A: Designed for carrier-grade IDC environments, this C50 transceiver adopts sealed dust-proof structure and enhanced ESD anti-static design. It resists static surges, floating dust and mild humidity, supporting reliable 24/7 rack-mounted operation.

Q7: How reliable is the DDM diagnostic function of your DWDM transceiver?
A: Every C50 fiber transceiver is individually optically calibrated and tested before shipment. The upgraded DDM system delivers highly accurate real-time data for optical power, temperature and voltage, supporting precise daily operation management and fast fault troubleshooting.

Q8: Is non-stop hot-swap maintenance safe for network ports and modules?
A: Equipped with optimized surge suppression and current-limiting circuits, this MSA-compliant transceiver supports fully safe hot swapping. It buffers instantaneous current fluctuations to protect switch ports and module hardware during live network maintenance.

Q9: What is the correct module removal method to prevent equipment damage?
A: Users should pull the module latch horizontally and steadily during removal. Avoid twisting, tilting or forced pulling, which may deform internal pins and scratch optical port end faces, affecting long-term transmission stability.

Q10: What maintenance schedule suits high-sensitivity long-haul DWDM links?
A: For sensitive 100km DWDM long-distance transmission systems, professional cleaning and maintenance of optical ports and connectors every 3–6 months is recommended to eliminate hidden optical attenuation risks.

Q11: Why is connector end-face cleanliness critical for dense DWDM transmission?
A: Dense long-haul DWDM transmission is highly sensitive to minor optical losses. Tiny dust and stains on connector end faces generate extra crosstalk and signal attenuation, directly reducing overall network transmission stability.

Q12: What operational risks come with unprotected standby DWDM modules?
A: Removing dust caps from idle C50 modules in active equipment racks poses hidden network risks. Exposed optical ports accumulate airborne dust, leading to poor optical coupling and intermittent link faults once the modules are activated for service.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • Cisco C30 DWDM‑SFP‑5333‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1553.33nm 100km 100GHz | HYTOPTODEVICE
  • HYTOPTODEVICE hot pluggable DWDM SFP transceiver module, gigabit network upgrade optical module
  • HYTOPTODEVICE high sensitivity APD DWDM transceiver module, carrier grade long haul optical transceiver
  • HYTOPTODEVICE bulk supply DWDM transceiver module, DDM monitoring gigabit telecom optical module

Download