• hytoptodevice 1.25g c36 DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf c36 1548.51nm
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
  • hytoptodevice 1.25g c36 DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf c36 1548.51nm
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Cisco C36 DWDM‑SFP‑4851‑80 Compatible 1.25G DWDM SFP Transceiver Module | 1000BASE-DWDM 1548.51nm 80km 100GHz | HYTOPTODEVICE

Cost-saving Cisco DWDM‑SFP‑4851‑80 replacement SFP, 100GHz ITU-T 1548.51nm single-mode 80km, TEC DML laser, full DDM DOM diagnostics, zero-alarm plug-and-play for Cisco Catalyst switches, ideal telecom metro DWDM & cell tower backhaul fiber links.
CH P/N CH P/N
C17 DWDM‑SFP‑6386‑80 C27 DWDM‑SFP‑5575‑80
C18 DWDM‑SFP‑6305‑80 C28 DWDM‑SFP‑5494‑80
C19 DWDM‑SFP‑6223‑80 C29 DWDM‑SFP‑5413‑80
C20 DWDM‑SFP‑6142‑80 C30 DWDM‑SFP‑5333‑80
C21 DWDM‑SFP‑6061‑80 C31 DWDM‑SFP‑5252‑80
C22 DWDM‑SFP‑5979‑80 C32 DWDM‑SFP‑5172‑80
C23 DWDM‑SFP‑5898‑80 C33 DWDM‑SFP‑5092‑80
C24 DWDM‑SFP‑5817‑80 C34 DWDM‑SFP‑5012‑80
C25 DWDM‑SFP‑5736‑80  C35 DWDM‑SFP‑4932‑80
C26 DWDM‑SFP‑5655‑80  C36 DWDM‑SFP‑4851‑80
Description

Cisco C36 DWDM‑SFP‑4851‑80 Compatible 1.25G DWDM SFP Transceiver Module | 1000BASE‑DWDM 1548.51nm 80km Bulk Wholesale

Product Overview

HYTOPTODEVICE C36 DWDM SFP is full pin-to-pin drop-in replacement for Cisco DWDM‑SFP‑4851‑80, built on standard 100GHz ITU-T C-band grid at 1548.51nm, delivering stable error-free 80km transmission over G.652.D single-mode fiber. Integrated TEC cooled DML laser cuts channel crosstalk, power under 2W. Preloaded Cisco EEPROM eliminates unsupported transceiver alerts, hot-swap & SFF-8472 DDM for metro rings and remote cell backhaul.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-4851-80 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1548.51nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DWDM DML (Cooled)
Cable Type SMF Receiver Type APD
TX Power 0~+4dBm Receiver Sensitivity < -30.0dBm
Power Consumption ≤2W Receiver Overload -8.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +4 dBm, install a 15–20 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -8 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DML (TEC) transmitter and a APD receiver (sensitivity -30 dBm, 30 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Custom Cisco‑specific EEPROM signature eliminates alarms and port lockdown. No extra configuration or firmware upgrade is required for plug‑and‑play deployment across supported Cisco enterprise and carrier‑grade hardware.

Fully Compatible Cisco Platforms:
  • Cisco Catalyst 3850, 9200, 9300 Series enterprise switches
  • Cisco ISR 4000‑series multi‑service branch routers
  • Cisco ASR 1000‑series carrier backbone routers
  • Cisco ONS optical transport platforms supporting 100GHz DWDM SFP
  • All Cisco devices accepting original DWDM‑SFP‑4851‑80 transceivers

2. Multi-Brand Cross Compatibility

Compliant with universal SFP MSA specifications, this C36 DWDM SFP runs error‑free on Huawei, H3C, Juniper, MikroTik and other mainstream network hardware. Custom firmware adaptation is available for complex multi‑vendor DWDM environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

• Metro DWDM Ring: Dedicated C36 wavelength realizes single-fiber multiplexing to reduce carrier fiber investment
• Wireless Cell Backhaul: Passive 80km gigabit connectivity lowers remote site operation expenses
• Enterprise Cross-Branch: Low-cost private fiber for inter-office data & real-time video transmission
• MAN Service Aggregation: Isolated wavelengths avoid service cross-interference and boost network stability
• Industrial IoT Monitoring: Anti-interference optical design for long-distance smart city & factory data links
• Legacy Network Upgrade: Add C-band wavelengths without full infrastructure overhaul

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution



2. 80km Long-Haul DWDM Solution


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Ultra-low power design reduces power consumption and heat generation. The optimized single-fiber structure simplifies data center cabling, enabling cost-effective and stable gigabit Ethernet transmission.

1G Data Center Connectivity low power single-fiber Gigabit Ethernet DWDM SFP solution


2.
Verified Host Interoperability for Cisco Devices

Calibrated firmware supports zero-alarm plug-and-play for Huawei, Cisco and other mainstream devices. It solves multi-brand compatibility problems and adapts to hybrid network deployment.
Verified multi-vendor interoperability for  Cisco  DWDM SFP transceiver

3.Rigorous Testing, Uncompromising Reliability

Integrating precise wavelength locking, stable 80km long-haul transmission and multi-scenario adaptability, this module forms a complete gigabit DWDM solution. It fully meets diversified networking demands for carrier metro backhaul and enterprise long-distance interconnection.

Comprehensive 1.25G 80km C17 DWDM networking solution for carrier and enterprise deployment


FAQ

Q1: Will using third-party compatible transceivers void my host equipment’s warranty?
A: MSA-compliant third-party compatible transceivers do not void equipment warranty under most regional trade regulations. If your vendor enforces OEM lock, HYTOPTODEVICE's  free custom EEPROM coding can remove recognition prompts to avoid maintenance disputes. Contact us for region-specific guidance.

Q2: Do you support custom coding for niche or specialized equipments and devices?
A: We offer full EEPROM custom coding service for niche switches, industrial transport and legacy specialized hardware. Our engineering team delivers targeted technical solutions within one working day, and you can reach us 24/7 for support.

Q3: Are your products fully compliant with Multi-Source Agreements (MSA)?
A: All C36 DWDM SFP modules strictly follow SFP MSA mechanical, electrical and optical specs, together with full SFF-8472 DDM support. Form factor, pinout and signal performance fully meet official MSA standards.

Q4: What is the maximum optical link budget supported by this model?
A: This C36 DWDM module provides 24dB total link budget, calculated from 0~+5dBm transmit power and -24dBm receiver sensitivity, supporting up to 80km standard single-mode fiber under nominal loss conditions.

Q5: How do WDM wavelengths stay accurate over extended usage?
A: Built-in TEC thermoelectric cooling continuously stabilizes laser chip temperature with factory precise calibration, suppressing wavelength drift and maintaining strict 100GHz ITU-T grid accuracy for long-term continuous operation.

Q6: Will insertion loss from DWDM/CWDM MUX/DEMUX cause link failure?
A: Normal multiplexer insertion loss will not trigger link failure thanks to the 24dB link margin. If cumulative attenuation exceeds budget, install EDFA amplifiers to compensate signal loss.

Q7: What is the minimum link distance required without using an attenuator?
A: The minimum safe unattenuated fiber distance for this 80km DWDM module is 15km. Shorter fiber runs require a 10–15dBm fixed attenuator to prevent receiver overload and permanent hardware damage.

Q8: Does the transceiver include built-in overcurrent or overvoltage protection?
A: Yes, integrated internal protection circuits resist overvoltage, overcurrent and ESD surges during hot swap, fully protecting laser and receiver chips from accidental electrical damage.

Q9: How does thermal management affect wavelength locking in DWDM modules?
A: Laser wavelength shifts sharply with temperature fluctuations. The embedded TEC dynamically regulates laser temperature to lock the 1548.51nm channel and eliminate adjacent channel crosstalk.

Q10: What happens if a sfp transceiver exceeds its maximum operating temperature?
A: Excess heat causes wavelength drift, higher bit error rate and abnormal DDM readings. Long-term overheating shortens laser lifespan; you should deploy rack cooling or select industrial wide-temperature modules for high-temperature environments.

Q11: How do I access DDM parameters on my network switch?
A: View real-time DDM metrics via standard switch CLI transceiver commands or web GUI diagnostic tabs. Tx power, Rx power, temperature, bias current and voltage data are exposed following SFF-8472 without extra software.

Q12: How do you prevent end-face contamination during shipping for dwdm sfp transceivers?
A: At HYTOPTODEVICE, each C36 module is fitted LC dust caps after optical inspection, individually sealed in anti-static moisture-proof bags with shock foam packaging to avoid scratches, dust and oil contamination of fiber end faces in transit.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

  • hytoptodevice 1.25g c36 DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf c36 1548.51nm
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Download