• hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Cisco C18 DWDM‑SFP‑6305‑80 Compatible 1.25G DWDM SFP Transceiver | 1000BASE-DWDM 1563.05nm 80km 100GHz | HYTOPTODEVICE

Factory wholesale Cisco C18 DWDM‑SFP‑6305‑80 compatible 1.25G DWDM SFP transceiver. ITU‑T 100GHz grid 1563.05nm channel delivers stable 80km transmission over G.652.D OS2 single‑mode fiber. Pre‑programmed EEPROM for zero‑alarm operation, full DDM monitoring support. Custom firmware and large‑volume orders available for DWDM metro ring and carrier back‑haul deployments.
CH P/N CH P/N
C17 DWDM‑SFP‑6386‑80 C27 DWDM‑SFP‑5575‑80
C18 DWDM‑SFP‑6305‑80 C28 DWDM‑SFP‑5494‑80
C19 DWDM‑SFP‑6223‑80 C29 DWDM‑SFP‑5413‑80
C20 DWDM‑SFP‑6142‑80 C30 DWDM‑SFP‑5333‑80
C21 DWDM‑SFP‑6061‑80 C31 DWDM‑SFP‑5252‑80
C22 DWDM‑SFP‑5979‑80 C32 DWDM‑SFP‑5172‑80
C23 DWDM‑SFP‑5898‑80 C33 DWDM‑SFP‑5092‑80
C24 DWDM‑SFP‑5817‑80 C34 DWDM‑SFP‑5012‑80
C25 DWDM‑SFP‑5736‑80  C35 DWDM‑SFP‑4932‑80
C26 DWDM‑SFP‑5655‑80  C36 DWDM‑SFP‑4851‑80
Description

Cisco C18 DWDM‑SFP‑6305‑80 Compatible 1.25G DWDM SFP Transceiver | 1000BASE‑DWDM 1563.05nm 80km Bulk Wholesale

Product Overview

This 1.25G C18 DWDM SFP is fully pin‑to‑pin compatible with Cisco DWDM‑SFP‑6305‑80. Complying with 1000BASE‑DWDM and SFP MSA standards, it delivers stable 80km transmission on G.652.D/OS2 single‑mode fiber with ITU‑T 100GHz 1563.05nm fixed wavelength.
Adopting professional Cooled DML (TEC) transmitter and APD receiver core devices, this module achieves ultra-precise wavelength locking and excellent signal receiving sensitivity. Built-in TEC temperature control system effectively suppresses wavelength drift under extreme temperature changes, completely avoiding DWDM channel crosstalk and ensuring stable operation in standard 100GHz metro DWDM ring multiplexing systems.
Pre‑flashed professional EEPROM enables zero‑alarm plug‑and‑play on Cisco devices, supporting hot‑swap and full SFF‑8472 DDM real‑time monitoring. We provide factory bulk supply and personalized customization services for global DWDM projects.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-6305-80 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1563.05nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DWDM DML (Cooled)
Cable Type SMF Receiver Type APD
TX Power 0~+4dBm Receiver Sensitivity < -30.0dBm
Power Consumption ≤2W Receiver Overload -8.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +4 dBm, install a 15–20 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -8 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DML (TEC) transmitter and a APD receiver (sensitivity -30 dBm, 30 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Custom Cisco‑specific EEPROM signature eliminates alarms and port lockdown. No extra configuration or firmware upgrade is required for plug‑and‑play deployment across supported Cisco enterprise and carrier‑grade hardware.

Fully Compatible Cisco Platforms:
  • Cisco Catalyst 3850, 9200, 9300 Series enterprise switches
  • Cisco ISR 4000‑series multi‑service branch routers
  • Cisco ASR 1000‑series carrier backbone routers
  • Cisco ONS optical transport platforms supporting 100GHz DWDM SFP
  • All Cisco devices accepting original DWDM‑SFP‑6305‑80 transceivers

2. Multi-Brand Cross Compatibility

Compliant with universal SFP MSA specifications, this C18 DWDM SFP runs error‑free on Huawei, H3C, Juniper, MikroTik and other mainstream network hardware. Custom firmware adaptation is available for complex multi‑vendor DWDM environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

  • Metro DWDM Ring Networking: Standard C18 100GHz wavelength supports single-fiber multiplexing. It saves fiber resources for carrier metro backbone deployment and network expansion.
  • ISP Base Station Backhaul: Supports 80km passive long-distance transmission. It eliminates extra amplification equipment and cuts ISP operation costs.
  • Enterprise Cross-Branch Connection: Builds stable low-cost private optical links. It supports cross-region data synchronization and video conference transmission.
  • MAN Access Aggregation: Provides independent wavelength service isolation. It effectively avoids network congestion and improves MAN operation stability.
  • Industrial & IoT Transmission: Features excellent anti-interference capability. It guarantees stable 80km signal transmission for industrial and smart city monitoring.
  • Legacy Network Upgrade: Supplements exclusive C-band DWDM channels. It enables low-cost multi-service multiplexing and bandwidth expansion for old fiber networks.

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution



2. 80km Long-Haul DWDM Solution


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Ultra-low power design reduces power consumption and heat generation. The optimized single-fiber structure simplifies data center cabling, enabling cost-effective and stable gigabit Ethernet transmission.

1G Data Center Connectivity low power single-fiber Gigabit Ethernet DWDM SFP solution


2.
Verified Host Interoperability for Cisco Devices

Calibrated firmware supports zero-alarm plug-and-play for Huawei, Cisco and other mainstream devices. It solves multi-brand compatibility problems and adapts to hybrid network deployment.
Verified multi-vendor interoperability for  Cisco  DWDM SFP transceiver

3.Rigorous Testing, Uncompromising Reliability

Integrating precise wavelength locking, stable 80km long-haul transmission and multi-scenario adaptability, this module forms a complete gigabit DWDM solution. It fully meets diversified networking demands for carrier metro backhaul and enterprise long-distance interconnection.

Comprehensive 1.25G 80km C17 DWDM networking solution for carrier and enterprise deployment


FAQ

Q1: Why do high‑output 80km DWDM SFP modules require attenuators for short‑distance links?
A: 80km‑grade DWDM transceivers adopt high‑power EML lasers to compensate for long‑span fiber attenuation. When deployed on links below 15 km without attenuation, excessive launch power saturates the receiver and triggers bit‑errors or permanent component damage.

Q2: What laser device is implemented inside this C18 1563.05nm DWDM SFP?
A: This C18 DWDM transceiver adopts high-precision Cooled DFB (TEC) transmitter and PIN receiver. The built-in TEC active temperature control system achieves strict wavelength locking for 100GHz grid, eliminating wavelength drift and effectively preventing adjacent channel crosstalk in multi-channel DWDM systems.

Q3: Which fiber type delivers reliable 80km performance for C18 DWDM‑SFP‑6305‑80?
A: G.652.D / OS2 low‑loss single‑mode fiber is required. Legacy fiber with higher attenuation will consume the link‑budget rapidly over 80km spans and cause unstable DWDM‑channel performance.

Q4: Will this C18 DWDM SFP work on standard SFP slots from different vendors?
A: Yes. This module complies with SFP MSA mechanical and electrical specifications. It supports hot‑swap plug‑and‑play on standard SFP ports without hardware modification, while brand‑specific EEPROM programming avoids host‑side alarms.

Q5: Can this C18 DWDM optic operate in multi‑brand mixed‑vendor DWDM networks?
A: It supports multi‑brand interoperability for Cisco, Huawei, Juniper and other mainstream devices. Pre‑flashed adaptive firmware prevents port lockdown and alarms, and real‑machine testing validates performance within hybrid‑vendor DWDM environments.

Q6: What is typical power consumption for this 1.25G 80km C18 DWDM SFP?
A: This module adopts Cooled DFB (TEC) transmitter and PIN receiver. The optimized circuit design keeps power consumption below 2W with stable heat output. It adapts to long-term full-load operation of metro DWDM rings, reducing cabinet thermal pressure and equipment operation risks.

Q7: How does ambient temperature variation affect 100GHz‑grid DWDM channel performance?
A: Laser wavelength drifts about 0.1nm/°C with temperature changes. On the 100GHz DWDM grid with narrow 0.8nm channel spacing, unregulated drift causes channel misalignment, crosstalk and unstable links. This C18 module adopts a TEC-cooled DFB laser to lock wavelength steadily. Exceeding the 0°C–70°C operating range overloads TEC heat dissipation, leading to power drop, wavelength offset and higher BER. Stable ambient cooling is required for reliable operation.

Q8: What causes unexpected link‑loss events on long‑haul DWDM fiber links?
A: Common triggers include dirty connector end‑faces, poor splicing joints, loose couplings and fiber aging. Cumulative insertion loss eats into the DWDM link‑budget and results in unstable metro‑back‑haul transmission.

Q9: Can I use standard‑band EDFA amplifiers to extend the reach of this C18 DWDM‑SFP‑6305‑80?
A: Yes, C18 1563.05nm sits inside standard C‑band amplification window. Proper OSNR calculation is mandatory when adding EDFA for spans beyond 80 km to avoid DWDM‑channel performance degradation.

Q10: Is DDM/DOM monitoring available for this compatible Cisco DWDM‑SFP‑6305‑80?
A: Full SFF‑8472 DDM/DOM is supported. You can read real‑time transmit power, receive power, temperature and supply voltage directly from host equipment for remote DWDM‑link diagnostics and early‑failure warning.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Download