Brocade 10G-SFPP-TWX-0301 Compatible SFP+ DAC Direct Attach Copper 3m | 10GBASE-CU Passive Twinax Bulk Wholesale | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE supplies premium SFP+ DAC Direct Attach Copper 3m cable, this Brocade 10G-SFPP-TWX-0301 compatible 10GBASE-CU SFP+ to SFP+ passive twinax DAC cable. Built to MSA and SFF-8431 standards, this passive twinax copper cable features zero power consumption and ultra-low latency. It is designed for medium-distance in-rack stacking, server and storage interconnection for Brocade data center switches and fabric networks. Every SFP+ DAC Direct Attach Copper 3m cable undergoes strict continuity and signal integrity testing before delivery. We support sample validation, custom EEPROM programming, OEM private labeling, fast global shipping and bulk wholesale orders with flexible MOQ for data center integrators, network distributors and global buyers.
Key Technical Specifications
| Brocade Compatible |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
3m (10ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
23mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
Full Compatibility List & Supported Devices
1. Validated Brocade Hardware & Firmware
● Brocade ICX 6650 / 7750 series 10G enterprise switches
● Brocade VDX data center fabric switches
● Brocade FCX series access switches
● Brocade 10G SFP+ NIC servers
● Brocade Network OS
Minimum supported firmware: Network OS 8.0 and above
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this SFP+ DAC Direct Attach Copper 3m cable supports mixed-vendor networking hardware. It interoperates smoothly with Cisco, Arista, H3C, Juniper, Dell, NVIDIA/Mellanox and other mainstream 10G SFP+ switches and NICs, suitable for mixed-brand rack stacking and network fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• Brocade switch to server 10G rack trunk uplink
• Intra-rack Brocade switch stacking interconnection
• Leaf-spine fabric short-range interconnection
• Virtualization cluster and storage fabric interconnection
• Bulk inventory sourcing for Brocade data center contractors and integrators
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the SFP+ 10G DAC replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive SFP+ 10G DAC draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP+ passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: Can this Brocade compatible twinax DAC establish links between different vendor network hardware?
A: Yes, this HYTOPTODEVICE SFP+ DAC direct attach copper cable supports cross-brand interconnection if both sides follow the 10GBASE-CU MSA standard. Consistent port configuration ensures stable cross-vendor links between Brocade and Ubiquiti hardware.
Q2: Is it possible to rewrite the cable’s EEPROM signature after upgrading my network infrastructure?
A: Yes, HYTOPTODEVICE offers EEPROM reprogramming service for our bulk SFP+ DAC direct attach copper cable. We provide coding tools for buyers to rewrite signatures when migrating to new network hardware platforms.
Q3: Will deploying non-original 10G twinax DACs void the hardware warranty of my Brocade switches?
A: Generally no, third-party compliant 10G DACs like our HYTOPTODEVICE 3m Brocade compatible twinax cable will not automatically void OEM warranty. Hardware damage caused by faulty DACs will be excluded, while normal interoperability use stays covered.
Q4: Do heavier 24AWG DAC cables create routing obstacles inside densely packed server racks?
A: Yes, 24AWG DAC cables have larger outer diameter and less flexibility than our standard 30AWG HYTOPTODEVICE SFP+ DAC direct attach copper cable. Thicker conductors bring better signal reach but increase routing difficulty in cramped high-density rack spaces.
Q5: Am I allowed to run passive 10G twinax DAC cabling outside rack enclosures or through building walls?
A: No, passive twinax DAC cables such as our HYTOPTODEVICE 10GBASE-CU cable are designed for indoor intra-rack use only. They lack outdoor-rated jacket and flame ratings required for wall penetration or exposed outdoor runs.
Q6: How long is the factory warranty for HYTOPTODEVICE 10G-SFPP-TWX-0301 alternative DAC cable?
A: All SFP+ DAC Direct Attach Copper 3m cables from HYTOPTODEVICE carry 3-year factory warranty against production defects and hardware failure.
Q7: Do you have other meter options besides 3M 10G-SFPP-TWX-0301 equivalent copper cable?
A: We supply 0.5m/1m/2m/5m alternative SFP+ DAC Direct Attach Copper cables corresponding to Brocade original twinax DAC series different length part numbers.
Q8: Will Brocade switch fail to detect port after inserting 10G-SFPP-TWX-0301 replacement DAC?
A: All finished SFP+ DAC Direct Attach Copper 3m cables complete physical plug test on matching Brocade switch hardware before shipment to avoid port unrecognized risks.
Q9: Can 10GBASE-CU SFP+ DAC automatically drop speed to 1G or 100Mbps for backward compatibility?
A: No, our 10GBASE-CU SFP+ DAC direct attach copper cable locks to 10G rate. 10GBASE-CU standard does not support auto-negotiation fallback to 1G or 100M, so both connected ports must be set manually to 10G.
Q10: What temperature range should DAC cables sustain in hot aisle data centers or industrial deployments?
A: Our standard commercial-grade HYTOPTODEVICE SFP+ DAC direct attach copper cable runs 0℃ ~70℃. For hot aisles or industrial racks, we supply industrial temperature variants rated -40℃ ~85℃ for stable continuous operation.
Q11: How reliable are the pull latches on SFP+ DAC connectors during frequent re-cabling work?
A: The pull tab and latch on HYTOPTODEVICE SFP+ DAC direct attach copper cable are tested for over 500 hot-plug cycles. Reinforced plastic tabs prevent breakage during frequent re-cabling inside dynamic data center environments.
Q12: Can a 10G-rate SFP+ DAC work when plugged into a legacy 1G SFP hardware port?
A: No, 10G SFP+ DAC cannot negotiate or work on a native 1G SFP port. Our HYTOPTODEVICE 10GBASE-CU SFP+ DAC direct attach copper cable requires SFP+ 10G-capable ports on both ends to establish a link.
Q13: Why will generic unprogrammed DAC cables fail to bring up links on Brocade switching hardware?
A: This usually comes from mismatched EEPROM signature. Our HYTOPTODEVICE Brocade compatible 10G-SFPP-TWX-0301 SFP+ DAC direct attach copper cable can be pre-coded with Brocade signature to work smoothly with Brocade switches and bypass identity checks for stable link activation.
Q14: What tests confirm that a twinax DAC cable meets formal industry performance specifications?
A: You can verify compliance by BER testing, insertion loss and return loss measurement. Every HYTOPTODEVICE bulk SFP+ DAC direct attach copper cable passes target switch testing and MSA SFF-8431 validation before shipment.
Q15: What is DDM/DOM monitoring, and will passive 10G SFP+ DAC support this diagnostic function?
A: DDM/DOM is digital diagnostic monitoring for transceiver parameters, and our HYTOPTODEVICE 10G SFP+ DAC direct attach copper cable supports basic DDM readout. Passive DACs report cable and identity data but do not monitor optical power values.
Q16: What BER threshold counts as acceptable for stable 10GBASE-CU DAC links in production networks?
A: The target BER for stable 10GBASE-CU DAC links is ≤1×10⁻¹². All HYTOPTODEVICE SFP+ DAC direct attach copper cable are tested to hit this BER threshold to eliminate CRC errors for 24/7 data center operation.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

