CAB-SFP-SFP-0.5M Arista Networks Compatible 0.5M 10G SFP+ DAC Cable | 10GBASE-CU Twinax Copper Bulk Supply | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE is a professional 10g sfp+ dac cable supplier offering this CAB-SFP-SFP-0.5M Arista compatible 0.5m 10GBASE-CU SFP+ passive twinax DAC cable. This passive copper direct attach cable features zero power draw and ultra-low signal latency, built to MSA and SFF-8431 standards. It is widely deployed for short in-rack connections between Arista switches, servers and storage devices. Every cable undergoes continuity and signal integrity testing before shipment. We support sample verification, custom EEPROM coding, OEM private labeling and bulk supply with flexible MOQ for system integrators, data center operators and distributors.
Key Technical Specifications
| Arista Compatible |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
0.5m (1.6ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
23mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
Full Compatibility List & Supported Devices
1. Validated Arista Hardware & Firmware
● Arista 7050X Series 10G SFP+ leaf switches
● Arista 7060X Series 10G data center switches
● Arista 7280 Series 10G fabric switches
● Arista 10G SFP+ network interface cards
● Arista DCS series servers with SFP+ ports
● Arista top-of-rack 10G enterprise and cloud fabrics
Minimum supported EOS firmware version: EOS 4.21.0 and above
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this SFP+ DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
● In-cabinet short 10G links between adjacent top-of-rack switches
● Server to local TOR switch connections within the same rack
● Low-latency 10G links for financial trading infrastructure
● Short-distance 10G SAN storage interconnection
● Dense rack 10G networking for enterprise and cloud data centers
● Bulk supply for distributors, system integrators and IT contractors
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the 10G sfp+ DAC cable replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive 10g SFP+ DAC cable draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every 10g SFP+ passive copper twinax cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: Is HYTOPTODEVICE CAB-SFP-SFP-0.5M fully plug-and-play on genuine Arista 7050/7280 series switches?
A: Yes, both cable terminals are pre-written with Arista-matched EEPROM codes, supporting hot plug directly without firmware update or port error alert. As a reliable 10g sfp+ dac cable supplier, we test every unit on Arista platforms before dispatch.
Q2: Does CAB-SFP-SFP-0.5M passive twinax DAC support DDM/DOM real-time parameter monitoring?
A: No, passive DAC structure excludes DDM monitoring circuitry; only basic PN, length and speed EEPROM info saved for device identification. Contact HYTOPTODEVICE if you need active 10G SFP+ DAC with full DOM monitoring for your data center cabling project.
Q3: What fixed physical length of this Arista replacement CAB-SFP-SFP-0.5M twinax DAC for in-cabinet links?
A: Standard factory fixed length is 0.5 meter, designed exclusively for ultra-short in-rack cabling. Our 10g sfp+ dac cable supplier team also supplies 0.3M/1M/2M/3M alternate DAC lengths upon bulk order request.
Q4: Can HYTOPTODEVICE CAB-SFP-SFP-0.5M DAC connect non-Arista SFP+ switches and generic third-party server NIC?
A: Absolutely, full SFP+ MSA compliance guarantees compatibility with all SFP+ interface switches and server adapters across dozens of mainstream network brands. This is a popular multi-vendor 10GBASE-CU copper cable choice for mixed-brand fabric.
Q5: What cost advantages of buying HYTOPTODEVICE compatible DAC instead of original Arista CAB-SFP-SFP-0.5M OEM cable?
A: Identical electrical performance and full hardware interoperability, 40%~60% lower bulk procurement cost, in-stock quick global shipment and dedicated factory technical support. Our 10g sfp+ dac cable supplier program helps integrators cut cabling budget.
Q6: Does CAB-SFP-SFP-0.5M twinax DAC support hot swap on powered-running Arista switches and servers?
A: The DAC follows standard SFP+ hot-plug specification, allowing safe plug/unplug operation without shutting down active Arista network hardware. Hot swap capability simplifies on-site maintenance for 10G rack cabling.
Q7: How much power consumption does passive CAB-SFP-SFP-0.5M DAC generate during continuous 10G transmission?
A: Total power draw under 0.1W per end, far more energy-saving than optical transceivers and active DAC products. It is an eco-friendly copper cabling pick for green IDC built by our 10g sfp+ dac cable supplier.
Q8: What standard commercial operating temperature range for regular indoor cabinet deployment of this Arista compatible DAC?
A: Standard working temperature:0°C ~70°C; customized wide-temperature industrial-grade DAC available for non-air-conditioned harsh environments under large OEM orders. Suitable for stable 10G links in enterprise data center racks.
Q9: Does HYTOPTODEVICE provide private OEM branding and custom cable marking for global network distributors?
A: Flexible low MOQ supports private label packaging, laser cable marking and personalized EEPROM programming. Our 10g sfp+ dac cable supplier OEM service is built for resellers with custom wholesale cooperation demands.
Q10: What warranty policy applies for HYTOPTODEVICE CAB-SFP-SFP-0.5M Arista compatible DAC?
A: All in-stock CAB-SFP-SFP-0.5M DAC products come with standard 5-year factory warranty, free replacement service for defective items under regular installation and proper usage. Long warranty reduces after-sale risk for bulk buyers of 10G twinax cables.
Q11: Will this 0.5m Arista compatible passive SFP+ DAC negotiate down to 1G speed on regular SFP ports?
A: No, this SFP+ passive twinax DAC is built for fixed 10GBASE-CU operation. It cannot drop to 1G and will not establish link if plugged into 1G SFP slots; native SFP+ 10G ports are required for stable 10G copper links.
Q12: Can I pair this Arista pre-programmed DAC with SFP+ optical modules on opposite ends of the same 10G link?
A: No. Copper DAC works over electrical 10GBASE-CU while optics transmit light signals. Both ends need matching DAC cables to bring up a stable working link, do not mix twinax DAC and fiber optics in one channel.
Q13: Can I order a mixed batch with multiple DAC lengths all pre-coded for Arista EOS operating system?
A: Yes. HYTOPTODEVICE supports mixed-length DAC orders with unified Arista EEPROM coding, a convenient option for system integrators delivering full data center cabling projects. This bundled service is popular among our 10g sfp+ dac cable supplier clients.
Q14: Does this passive twinax DAC work together with fiber patch cords for 10GBASE-CU transmission?
A: No. This is a copper direct attach assembly without optical components. It sends electrical signals over internal copper conductors and cannot connect to fiber patch cords or optical cassettes.
Q15: What is the key reason to select passive SFP+ DAC over short-range optical modules for rack-local 10G connections?
A: Passive DAC draws negligible power and delivers ultra-low latency. It removes optical conversion overhead and cuts hardware spending, the preferred budget-friendly choice for fixed short intra-rack stacking connections from our 10g sfp+ dac cable supplier lineup.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

