• Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE

Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE

Source HYTOPTODEVICE passive direct attach copper breakout cable, 3m 100G QSFP28 to 4×25G SFP28 twinax, pre-coded EEPROM for Brocade SLX-OS / IronWare. Stable signal, low latency, bulk factory supply for distributors, system integrators.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco QSFP-4SFP25-CU3M 
2 Arista Networks  CAB-Q28-S28-3M
3 Brocade 100G-Q28-S28-C-0301
4 Huawei QSFP-4SFP25G-CU3M
5 Juniper QFX-Q-S-DAC-3M
6 Dell DAC-Q28-4SFP28-25G-3M
Description

Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 3m 100G QSFP28 to 4x25G SFP28 passive direct attach copper breakout cable is a direct replacement for Brocade 100G-Q28-S28-C-0301. Built per SFF-8662 MSA specification, this passive direct attach copper breakout cable splits one 100G QSFP28 port into four independent 25G SFP28 channels with zero power draw.
Hot-pluggable and pre-programmed with Brocade matched EEPROM for smooth recognition under Brocade SLX-OS and IronWare. HYTOPTODEVICE supplies this passive direct attach copper breakout cable for data center leaf-spine networking, supports bulk order, OEM private labeling, custom length and custom coding service.

Key Technical Specifications

Brocade Compatible
100G-Q28-S28-C-0301
Vendor Name HYTOPTODEVICE
Connector QSFP28+ to 4 x SFP28 Max Data Rate 100Gbps
Cable Length 3m (10ft) Wire AWG AWG 26
Cable Type Passive Twinax Power Consumption ≤0.25W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols IEEE 802.3, QSFP28 MSA, SFF-8665
Minimum Bend Radius 50mm Application 100G to 2x 25G Ethernet, Data Centers

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Breakout Configuration: Ensure the host QSFP28 port supports channelization. Enable breakout mode (4x25G) via the switch CLI before connecting the cable.

  • Cabling Requirements: Do not exceed the minimum 25mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.

  • Port Installation Standard: Do not mix this breakout DAC with straight QSFP28 to QSFP28 DAC configuration.

  • Hot‑swap rule:Never pull or tug directly on the individual breakout legs. Always use the integrated pull-tab or bale latch when inserting or removing connectors.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: 0‑70℃, indoor cabinet deployment only.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated Brocade Hardware & Firmware

  • Brocade ICX 7850, ICX 7750 high-performance enterprise & data center switches
  • Brocade NetIron MLX, NetIron XMR series core routing platforms
  • Brocade VDX 6740, VDX 6940 leaf-spine data center switches
  • Brocade SLX 9140, SLX 9240, SLX 9540 high-density Ethernet switches
  • Brocade 25G SFP28 NIC equipped rack servers for storage and compute clusters
  • Firmware: IronWare 08.0.x, SLX-OS 17r, SLX-OS 18r

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 100G QSFP28 to 4 x 25G SFP28 passive DAC breakout cable can interoperate with mainstream network brands including Arista, Intel, Juniper, Dell, NVIDIA Mellanox and IBM, for mixed-vendor rack stacking and server fabric expansion.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 

• Medium-distance intra-rack 100G uplink breakout to 4×25G server NIC links
• Leaf-spine data center fabric port density expansion
• AI computing server rack interconnection
• HPC and storage cluster medium-range copper cabling
• Data center hardware refresh and network migration
• Distributor stock preparation and system integration turnkey projects

Connectivity Solutions(Applications) 

1. 100G to 4x25G Breakout Link for Switch-Switch
HYTOPTODEVICE 100G QSFP28 to 4x25G SFP28 breakout DAC cable FOR SWITCH TO SWITCH


2. 100G to 4x25G Breakout Link for Switch-NIC
HYTOPTODEVICE 100G breakout twinax cable for data center


The Core Feature


1.
Near-Zero Power, Full-Speed 100G

This 100G QSFP28 passive DAC breakout cable sips no extra energy, cutting heat and cost in crowded racks while keeping low-latency 100G for in-rack or adjacent-rack runs.

hytoptodevice 100G QSFP28 to 4 x 25G SFP28 passive dac breakout cable for data center

2.Host-Device Tested for Proven Interoperability

Every unit is link-up tested on real target switch models; ports come online on first install across major vendor gear, no field tuning or replacement loops. Not sure it fits? Compatibility Video available upon request.

hytoptodevice wholesale 100G QSFP28+ to 4 sfp28 breakout twinax cable for data center

3. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE  100g QSFP28 to 4 x sfp28 passive breaktout  dac cable for switches

FAQ

Q1: Will this 100G breakout cable work with my Cisco switches and Juniper gear? A1: It can work on Cisco and Juniper hardware with matching breakout support. HYTOPTODEVICE programs this passive direct attach copper breakout cable with target EEPROM on request, eliminating vendor lock warnings for multi-vendor deployments.

Q2: Is this cable compatible with both QSFP28 and QSFP+ ports? A2: No, this passive direct attach copper breakout cable is designed exclusively for QSFP28 ports. QSFP+ electrical specs differ, so it cannot link to standard QSFP+ hardware.

Q3: Can I use this cable to connect a 100G switch to four separate 10G switches? A3: No, each lane of this 100G breakout cable runs at 25G. It requires 25G SFP28 ports on the far end and will not downshift to 10G for 10G switch connections.

Q4: Do I need to buy specific brand-coded versions (e.g., Cisco-coded vs. HP-coded)? A4: Brand-coded versions are recommended for locked OEM switches. HYTOPTODEVICE pre-programs each passive direct attach copper breakout cable to match your switch OS to avoid unsupported transceiver alerts.

Q5: Can I mix and match different brands of network cards on the SFP28 ends? A5: Yes, mixed-brand SFP28 NICs are supported as long as all NICs follow the MSA 25GBASE-CR standard. HYTOPTODEVICE validates our passive direct attach copper breakout cable for multi-brand SFP28 NIC mixing.

Q6: What is the maximum supported data rate per channel? A6: Each individual lane supports a fixed 25Gbps data rate. This passive direct attach copper breakout cable delivers four independent 25G channels from one 100G QSFP28 port.

Q7: What is the maximum recommended cable length for passive copper twinax? A7: The safe maximum length for this 25G per-lane passive copper twinax is 5 meters. HYTOPTODEVICE stocks 0.5m,1m,3m and 5m passive direct attach copper breakout cable for your rack layout.

Q8: What is the typical latency of a copper twinax breakout cable? A8: Typical latency sits around 0.6 ns per meter. This passive direct attach copper breakout cable has near-zero processing delay, making it ideal for low-latency AI and HPC clusters.

Q9: What wire gauge (AWG) is used in this cable, and does it affect flexibility? A9: Common gauges range from 26AWG to 30AWG. Thinner gauges such as 30AWG deliver better flexibility for dense cable management, while 26AWG supports runs up to 3 meters, and 24AWG is required for stable 5-meter passive links. HYTOPTODEVICE supplies the correct AWG for every passive direct attach copper breakout cable length you order.

Q10: Does this cable support auto-negotiation? A10: No, passive 25GBASE-CR twinax does not use auto-negotiation. Both ends must be manually configured to 25G fixed speed for this HYTOPTODEVICE breakout cable.

Q11: How flexible is the cable? Can I bend it tightly inside a crowded rack? A11: It has moderate flexibility, but you cannot bend it sharply. Follow the 55mm minimum bend radius rule to prevent internal conductor damage to this passive direct attach copper breakout cable.

Q12: Are the SFP28 ends labeled clearly to show which channel is which (Lane 1 to 4)? A12: Yes, every breakout tail is laser marked Lane1~Lane4. HYTOPTODEVICE clearly labels each SFP28 connector on this passive direct attach copper breakout cable for easy cabling mapping.

Q13: Can I route this cable between different server racks? A13: Yes, for adjacent racks within the 3m reach. This passive direct attach copper breakout cable is intended for short rack-to-rack links, not long cross-room runs.

Q14: What color options are available for the cable jacket? A14: Standard jacket color is black. HYTOPTODEVICE supports custom jacket colors for bulk orders of this passive direct attach copper breakout cable to meet your rack color coding rules.

Q15: Can I get a custom length (e.g., 2.5 meters) instead of standard sizes? A15: Yes, custom lengths are available for bulk purchases. Contact HYTOPTODEVICE sales to quote non-standard lengths for your passive direct attach copper breakout cable project.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE
  • Brocade 100G-Q28-S28-C-0301 Compatible 3m(10ft) 100G QSFP28 to 4 x 25G SFP28 Passive Direct Attach Copper Breakout Cable Bulk Wholesale | HYTOPTODEVICE

Download