Arista CAB-S-S-25G-1.5M Compatible 25G SFP28 Passive Copper Twinax Cable 1.5m (5ft) | 25GBASE-CR DAC Bulk Wholesale | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE 1.5m 25G SFP28 passive copper twinax cable acts as a fully interchangeable replacement for Arista CAB-S-S-25G-1.5M. It meets 25GBASE-CR, SFF-8402 and IEEE 802.3by standards to deliver stable 25.78125Gbps mid-distance intra-rack connections. This passive twinax DAC draws zero operating power and supports hot-swap operation.
We preload Arista-specific EEPROM signatures to eliminate unsupported transceiver alerts on Arista EOS platforms. FEC configuration remains optional under normal operating conditions for this 1.5-meter copper link. Ready stock, pre-shipment validation and OEM branding services are offered for distributors and enterprise data center buyers.
Key Product Parameters
| Arista Compatible |
CAB-S-S-25G-1.5M |
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP28 to SFP28 |
Max Data Rate |
25Gbps |
| Cable Length |
1.5m (5ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.5W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
IEEE 802.3, SFP28 MSA, SFF-8402, Infiniband, EIA 364-1000 |
| Minimum Bend Radius |
21mm |
Application |
25G Ethernet, Data Center, 5G Wireless |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP28 port must enable 25GBASE mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP28 25G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated Juniper Hardware & Firmware
- Arista 7050SX3, 7060SX2, 7060CX3, 7280R, 7300X series switches running Arista EOS
- Arista 7020SR, 7020TR, 7050QX high-density leaf switches
- Arista 7500E, 7500R modular chassis switch series
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this 25G SFP28 DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
- Intra-rack ToR leaf-to-server connections for Arista leaf-spine data center fabrics
- Low-latency NVMe over Fabrics storage cluster interlinks
- Virtualization, KVM and VMware hypervisor host networking
- HPC cluster short-range node interconnections
- Server rack local backup and replication networking
- Cost-saving direct replacement for original Arista 25G twinax DAC cabling
- High-density rack cabinet internal switch stacking links
Connectivity Solutions(Applications)
1. 25G to 25G Direct Link for Switch-Switch
2. 25G to 25G Direct Link for Switch-NIC
The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the 25gb SFP28 Passive DAC replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive 25g SFP28 passive DAC cable draws lower power consumption, reducing heat and energy costs in dense racks, while delivering a cost-effective, high-speed and low-latency 25G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP28 passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: Are Arista pre-coded 25G SFP28 passive copper twinax cables plug-and-play on EOS without extra CLI tweaks?
A: Yes, this HYTOPTODEVICE 25G SFP28 passive copper twinax cable supports plug-and-play deployment for Arista EOS. It is preloaded with Arista-validated EEPROM, and no extra unsupported-transceiver command is required for normal link negotiation.
Q2: Can this 25G twinax DAC connect Arista leaf switches to NVIDIA network adapters in GPU servers?
A: This cross-device connection works reliably with matching 25GBASE-CR settings. HYTOPTODEVICE 25G SFP28 passive copper twinax cable passes NIC compatibility testing, delivering stable links between Arista EOS switches and NVIDIA server adapters.
Q3: What risks appear if I buy untested generic 25G DAC cables for Arista data center fabrics?
A: Unvalidated generic DACs may trigger transceiver alarms, random link flaps or silent CRC errors. Every HYTOPTODEVICE 25G SFP28 passive copper twinax cable completes EOS platform testing before delivery to reduce fabric downtime risk.
Q4: Can I order blank EEPROM 25G SFP28 DAC cables and program them onsite with my own tools?
A: Blank EEPROM versions of this 25G twinax cable are available upon request. HYTOPTODEVICE can supply unprogrammed units, so your engineering team can custom-write signatures onsite for private lab or multi-vendor environments.
Q5: How does auto-negotiation interact with FEC modes on Arista 25G SFP28 DAC links?
A: 25GBASE-CR DAC links do not use standard auto-negotiation; FEC mode must be manually matched on both ends. HYTOPTODEVICE 25G SFP28 passive copper twinax cable supports manual RS-FEC or BASE-R FEC configuration on Arista ports.
Q6: Will inconsistent FEC modes on Arista port pairs lead to intermittent packet loss that is hard to troubleshoot?
A: FEC mismatch creates unstable links and hidden packet loss even if the interface shows “up”. Always align FEC parameters peer-to-peer when deploying HYTOPTODEVICE 25G SFP28 passive copper twinax cable inside Arista fabrics.
Q7: Why cannot passive 25G SFP28 DAC support distances longer than 5 meters?
A: 25G electrical signals suffer rapid insertion loss over copper twinax. Beyond 5m, attenuation exceeds the 25GBASE-CR specification limit; HYTOPTODEVICE supplies passive 25G SFP28 passive copper twinax cable within 0.5m–5m for rack-local deployments.
Q8: What performance difference will I see between 26AWG and 30AWG 25G SFP28 DAC at 1.5 meters?
A: At 1.5m, 30AWG offers enough signal performance with superior flexibility, while 26AWG has lower loss but stiffer routing. HYTOPTODEVICE selects 30AWG twinax for this 1.5m 25G SFP28 passive copper twinax cable to balance routing and signal integrity.
Q9: What cable management pain points happen with thick 24AWG 25G DAC inside Arista high-density racks?
A: 24AWG heavy-gauge DACs are rigid and stack poorly in tight cable trays. For Arista dense leaf racks, HYTOPTODEVICE’s 30AWG 25G SFP28 passive copper twinax cable routes neatly without straining SFP28 ports.
Q10: When is a 25G AOC a better fit instead of passive 25G SFP28 twinax DAC?
A: Choose 25G AOC for links that cross rack rows or exceed 5m. Passive HYTOPTODEVICE 25G SFP28 passive copper twinax cable is the better low-cost, zero-power option for fixed intra-rack connections under 5m.
Q11: How much latency saving can I expect when replacing fiber 25G links with passive 25G DAC?
A: Passive 25G DAC cuts roughly 30–60ns of latency by skipping optical-electrical conversion. HYTOPTODEVICE 25G SFP28 passive copper twinax cable suits low-latency trading, HPC and storage workloads sensitive to transmission delay.
Q12: Is it possible to achieve 25G speed by plugging this 25G SFP28 DAC into SFP+ 10G interfaces?
A: 25G speed negotiation is impossible on SFP+ ports. The electrical pinout and signal rate are not compatible; both ends must use native SFP28 ports to run this HYTOPTODEVICE 25G SFP28 passive copper twinax cable at full 25G rate.
Q13: What prerequisites must be met to deploy QSFP28 breakout 4x25G DAC for Arista server connectivity?
A: Breakout functionality depends fully on Arista EOS firmware support and port split license. Breakout DAC is a separate product line from this point-to-point HYTOPTODEVICE 25G SFP28 passive copper twinax cable.
Q14: What are common root causes when Intel E810 NICs refuse to establish a link with generic 25G DAC?
A: Most link failures stem from incomplete EEPROM identification data. HYTOPTODEVICE validates this 25G SFP28 passive copper twinax cable against Intel E810 and Mellanox NICs to resolve handshake and recognition failures.
Q15: What quality testing does HYTOPTODEVICE run on SFP28 pull-tab and latch assemblies before shipment?
A: Our SFP28 latching structure passes 500+ plug/unplug cycle durability testing. Reinforced pull-tab plastic is adopted on this 25G SFP28 passive copper twinax cable to reduce breakage during frequent data center re-cabling.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration


Connectivity Solutions(Applications):
Scenarios 1:25G-to-25G Link for Switch-to-Switch

Scenarios 2:25G-to-25G Link for Switch-to-Server

FAQ for Cisco SFP-H25G-CU1.5M Compatible DAC SFP28 25G Cable
Q1:Is this 25G SFP28 cable natively backward compatible with 10G SFP+ ports? A:Although SFP28 and SFP+ connectors are physically identical, standard SFP28 25G DAC is programmed as high-speed devices. Most ports that support only 10G cannot recognize 25G-coded cables due to a mismatch in EEPROM identifiers. Most Dell S-Series 25G ports support dual-speed operation at 10G and 25G.
Q2:How far can I run a SFP28 25G DAC cable?A:Because DAC cables are made of dual-core copper wire, they are relatively heavy and experience signal attenuation at a faster rate than fiber optic cables; therefore, the actual transmission distance for SFP28 25G DAC cable is limited to 7 meters or less.
Q3:What is the power consumption of this passive SFP28 25G DAC compared to 25G SR optics? A: HYTOPTODEVICE passive 25G DAC consumes near zero power (≤0.5W) and generates no heat. By comparison, a pair of 25G SR fiber optical transceivers consumes approximately 1.5W to 2.0W of power. For a rack containing 48 servers, switching to the HYTOPTODEVICE 25G DAC can save nearly 100W of power and significantly reduce the cooling load.
Q4:Will this 25G cable cause an "Unsupported Transceiver" error in HPE switches?A:No. DAC Manufacturer China HYTOPTODEVICE uses precise HPE EEPROM coding. Your device will recognize this 25g sfp28 cable as a genuine HPE 844471-B21, ensuring 100% compatibility.
Q5:Does 25G SFP28 DAC use Multi-mode or Single-mode fiber?A:Neither. The DAC(Direct-Attach Copper) is a copper cable. using a twinaxial copper architecture (Twinax) to transmit electrical signals directly, no light signals.There are not lasers or optical glass in DAC cable, it is much cheaper than fiber optics.
Q6:Will this cable trigger "Unsupported Transceiver" alarms in Junos?A:No. HYTOPTODEVICE cables are pre-programmed and feature a genuine Juniper-specific EEPROM signature. Your switch will recognize the cable as a genuine Juniper JNP-25G-DAC-1M, ensuring zero CLI warnings and full diagnostic support.
Q7:Is 25G SFP28 DAC hot-swappable?A:HYTOPTODEVICE SFP28 25G DAC is hot-pluggable, hot Pluggable SFP28 Compliant.you can plug or unplug the passive DAC, while the device is powered on without damaging the hardware.
Q8:who makes the best 25G SFP28 DAC cable?A: Transceiver Manufacturer China HYTOPTODEVICE is the excellent provider.Sorce factory,reliable quality, 100% compatibiltiy.fast delivery and quick response.HYTOPTODEVICE send a tool that allows you to re-program the compatibility of your cables yourself.
Q9:Is 30AWG wire gauge enough for 25G at 1 meter?A: Yes,That is absolutely correct. For a transmission distance of 1 meter, 30 AWG cable strikes the optimal balance between flexibility (for easy cabling within Juniper racks) and signal integrity, exceeding the requirements for 25GbE copper links specified in the IEEE 802.3by standard.
Q10:What is the difference between "Passive" and "Active" DAC?There are distinct differences between Passive and Active DAC.The Passive DAC has no signal amplification. its lengths is under 7m. With zero power consumptions,it cost is cheaper. The Active DAC contains a chip to boost the signal. Used for slightly longer copper runs (up to 10m-15m) and is generally thinner/more flexible.
Q11:Can I plug a 25G DAC into a 10G SFP port?A:No. SFP28 (25G) ports can often accept 10G transceivers, but a 10G SFP port cannot scale up to recognize a 25G DAC cable. You should Make sure the cable speed matches the port with the lowest rated speed.
Quality Assurance:Your Trusted Optical Transceiver Source
HYTOPTODEVICE is a vertically integrated manufacturer of high-performance optical transceivers. By controlling core materials at the source, we ensure every SFP module meets the highest standards of reliability and customization.
-
Vertical Integration: In-house core material production ensures a stable, self-sufficient supply chain for all optical modules.
-
Total Traceability: End-to-end oversight from raw components to final transceiver assembly guarantees 100% controllability.
-
Bespoke Solutions: Expert-led R&D provides customized SFP transceiver designs tailored to your specific technical needs.
-
24-Hour Response: Our technical team guarantees a primary response to any inquiry or quality concern within 24 hours.
Carrier-Grade Quality. Factory-Direct Control. Rapid Response.
Quality Certification & Compliance:
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing:

100% 3rd Party Compatible:

Partial Test Demonstration:

Others:



