| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-H25G-CU50CM | |
| 2 | Arista Networks | CAB-S-S-25G-0.5M | |
| 3 | Dell | DAC-SFP-25G-0.5M | |
| 4 | HPE Aruba | JL487A | |
| 5 | HPE BladeSystem | 844471-B21 | |
| 6 | Juniper | SFP-25G-DAC-50CM | |
| 7 | NVIDIA(Mellanox) | MCP2M00-A00A |
Pre‑programmed with Arista‑specific EEPROM data, it supports alarm‑free plug‑and‑play deployment under Arista EOS without unapproved‑cable warning logs. This short‑length passive copper assembly requires no FEC for stable link operation. HYTOPTODEVICE provides factory bulk stock, sample trial orders and OEM customization for wholesalers, distributors and system integrators building Arista‑based leaf‑spine, HPC and cloud data‑center fabrics.
Key Product Parameters
| Arista Compatible | CAB‑S‑S‑25G‑0.5M | Vendor Name | HYTOPTODEVICE |
| Connector | SFP28 to SFP28 | Max Data Rate | 25Gbps |
| Cable Length | 50Cm (1.6ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3, SFP28 MSA, SFF-8402, Infiniband, EIA 364-1000 |
| Minimum Bend Radius | 21.25mm | Application | 25G Ethernet, Data Center, 5G Wireless |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host SFP28 port must enable 25GBASE mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard SFP28 25G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
This 25G SFP28 DAC CABLE adopts Arista‑specific EEPROM, supporting zero‑alarm plug‑and‑play under official Arista EOS firmware. All products are strictly tested, fully compatible with the below Arista hardware models:
Arista Leaf‑Spine Data‑Center Switches
• Arista 7050X3‑48YC6, 7050X3‑96Y leaf switches
• Arista 7060X3‑48YC6, 7060X3‑72Q aggregation switches
• Arista 7280R‑48YC6, 7280R‑96Y core fabric switches
• Arista 7368X4 high‑density multi‑rate chassis switches
Servers with SFP28 NIC working in Arista EOS fabric
• Dell PowerEdge, HPE ProLiant, Supermicro rack servers equipped with 25G SFP28 ConnectX‑4 / ConnectX‑5 / ConnectX‑6 network adapters
Built on universal MSA open standards, this SFP28 DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.






Q1: Can this 0.5 m 25G SFP28 passive DAC bring‑up valid connections when inserted into legacy 10G SFP+ ports on Arista leaf switches? A: No, this Arista‑compatible 25G SFP28 DAC CABLE runs at fixed 25.78125Gbps. Without multi‑rate port negotiation support on host hardware, plugging into pure‑10G SFP+ ports results in no‑link status. Both sides require genuine SFP28 ports to establish valid 25G connections.
Q2: Is enabling FEC compulsory when deploying this short‑length 0.5 m 25GBASE‑CR DAC within Arista EOS leaf‑spine environments? A: No, FEC is not required for 0.5‑meter 25GBASE‑CR passive links. This ultra‑short copper assembly possesses substantial signal margin and achieves stable BER performance without Reed‑Solomon FEC activation on Arista EOS switches. FEC can be turned‑on for troubleshooting longer‑cable deployments but brings unnecessary latency overhead for this 0.5m variant.
Q3: Does this Arista‑replacement SFP28 DAC need special EOS CLI tweaks for hyper‑converged compute clusters connected to Arista fabrics? A: No, most SFP28‑equipped compute hardware will auto‑establish links after physical insertion thanks to pre‑loaded Arista‑matching EEPROM. Sample pre‑validation is still advised to confirm EOS firmware‑revision compatibility before large‑scale cluster roll‑out.
Q4: Can multiple short 25G SFP28 passive DACs be daisy‑chained to get longer intra‑rack reach inside Arista data‑center racks? A: No, cascading passive twinax DAC assemblies is unsupported. Signal integrity collapses and generates excessive bit‑error rates. Each 25GBASE‑CR passive DAC must connect directly between two SFP28 ports without intermediate adapters or extra copper jumpers.
Q5: For ToR‑adjacent server connections in Arista leaf‑spine racks, what benefits does low‑latency passive 25G SFP28 DAC offer versus SFP28 optical transceivers? A: Passive twinax DAC provides superior total‑cost‑of‑ownership for ultra‑short intra‑rack links. It consumes near‑zero power, eliminates optical component costs and conversion latency. SFP28 optical modules are reserved for inter‑rack long‑distance fiber‑transmission scenarios.
Q6: Are TDR and eye‑diagram signal‑integrity sampling tests performed for each manufacturing batch of HYTOPTODEVICE Arista‑compatible 25G SFP28 DAC CABLE? A: Not every single cable receives full eye‑diagram measurement, but each manufacturing batch undergoes representative TDR and eye‑diagram sampling plus end‑to‑end Arista‑EOS target‑hardware testing. This QC workflow controls impedance anomalies and link‑flutter risk for wholesale‑order buyers.
Q7: Will third‑party compatible SFP28 passive DAC cables automatically void OEM hardware warranty for Arista leaf‑spine switches? A: Generally they will not void OEM warranty automatically under most regional policies. Warranty exclusion only applies where physical port damage can be directly traced back to defective DAC hardware. HYTOPTODEVICE supplies complete test documentation helping distributors protect end‑customer original‑equipment coverage.
Q8: What conductor wire gauge is used for this Arista CAB‑S‑S‑25G‑0.5M replacement 0.5m SFP28‑to‑SFP28 twinax DAC, and how does it impact rack cabling? A: This short‑length SKU adopts flexible 30AWG twinax copper. Thinner gauge facilitates neat routing within densely packed Arista rack‑unit gaps while fully satisfying electrical requirements for 0.5‑meter 25GBASE‑CR transmission.
Q9: Is hot‑swap operation safe for this passive 25G SFP28 DAC inside powered‑on Arista EOS switch racks? A: Yes, SFF‑8402‑compliant SFP28 assemblies support hot‑swap. Operators can insert and remove the DAC while Arista switches and attached servers remain powered‑on. HYTOPTODEVICE gold‑plated contacts are validated for repeated hot‑plug cycles in dynamic data‑center environments.
Q10: What typical field‑proven defective rate can wholesale buyers expect for factory‑tested HYTOPTODEVICE 25G SFP28 DAC CABLE lots? A: Our field‑observed RMA defective rate stays well below 0.3 %. Multi‑stage IQC‑PQC‑FQC inspection plus target‑platform pre‑testing reduces after‑sales troubleshooting burden for resellers undertaking Arista‑based 25G leaf‑spine data‑center projects.
Q11: Are custom‑length SFP28 twinax DAC assemblies eligible for return when customers submit incorrect dimension orders? A: Custom non‑standard length DAC products are non‑returnable unless shipped with factory‑origin defects. HYTOPTODEVICE validates dimension specifications with buyers ahead of custom production and offers sample evaluation service for special‑length bulk projects.
Q12: How are these SFP28 DAC cables packaged to safeguard pins and internal twinax conductors during cross‑border wholesale shipments? A: Each individual DAC is fitted with SFP28 dust caps on both ends, loosely coiled, sealed inside anti‑static bags and packed inside cushioned outer cartons. This packaging protects copper contacts and internal conductors for international logistics for distributor bulk orders.
Q13: What troubleshooting steps should technicians follow for a 25G SFP28 DAC showing “No‑Link / Port‑Down” status on Arista EOS? A: First reseat both SFP28 connectors and confirm host ports are configured for 25GBASE‑CR operation. Next swap in a known‑good reference HYTOPTODEVICE DAC to isolate faults between cable, port hardware or EOS‑enforced cable‑block policies. We provide formal troubleshooting guides for bulk‑order enterprise clients.
Q14: What approved maintenance procedure should be used to clean dust‑contaminated copper contacts on passive SFP28 DAC cable heads? A: Use industry‑approved SFP28 copper‑contact cleaning sticks only. Avoid coarse cloths or excessive alcohol spraying. HYTOPTODEVICE ships every DAC fitted with protective dust caps; retaining dust caps on unused spare cables minimizes dust‑contamination issues in server‑room environments.
Q15: What factors trigger gradually rising BER errors that only surface several hours after 25G SFP28 DAC links go live inside Arista leaf‑spine racks? A: Such delayed bit‑error symptoms are commonly induced by thermal expansion shifting connector contact pressure or marginal signal integrity. HYTOPTODEVICE applies thermal‑cycle screening during production to screen marginal units out, preventing delayed‑fault occurrences for continuous 24/7 Arista EOS data‑center operation.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.





Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




