| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-4SFP10G-CU50CM | |
| 2 | Arista Networks | CAB-Q-S-0.5M | |
| 3 | Juniper | QFX-QSFP-DACBO-50CM | |
| 4 | Brocade | 40G-QSFP-4SFP-C-0105 | |
| 5 | Dell | 332-1365 | |
| 6 | Intel | X4DACBL50 | |
| 7 | NVIDIA/Mellanox | MC2609130-050 | |
| 8 | IBM | BN-QS-SP-CBL-50CM |
| Arista Compatible |
CAB-Q-S-0.5M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP+ to 4 x SFP+ | Max Data Rate | 40Gbps |
| Cable Length | 0.5m (1.6ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | SFF-8436, SFF-8431 and QSFP+ MSA |
| Minimum Bend Radius | 21mm | Application | 40G InfiniBand 8x DDR, 4x QDR, 10/40 Gigabit Ethernet, Fibre Channel |
Usage Guidelines & Best Practices
Mandatory Port Breakout Configuration: Ensure the host QSFP+ port supports channelization. Enable breakout mode (4x10G) via the switch CLI before connecting the cable.
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Do not mix this breakout DAC with straight QSFP+ to QSFP+ DAC configuration.
Hot‑swap rule:Never pull or tug directly on the individual breakout legs. Always use the integrated pull-tab or bale latch when inserting or removing connectors.
Operating Environment: 0‑70℃, indoor cabinet deployment only.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 40G QSFP+ to 4 x 10G SFP+ passive breakout DAC cable can interoperate with mainstream network brands including Arista, Intel, Juniper, Dell, NVIDIA Mellanox and IBM, for mixed-vendor rack stacking and server fabric expansion.




Q1: Will this third-party Arista compatible 40G breakout twinax cable work natively on my Cisco switch without throwing an unsupported transceiver error? A: No, many enterprise switches enforce strict vendor lock-in. You need to select the brand-matching coded version when purchasing. HYTOPTODEVICE provides pre-coded Arista compatible 40G breakout twinax cable to prevent warning messages or link failure.
Q2: What happens if I update my switch firmware? Will this Arista pre-coded 40G QSFP+ fan-out DAC stop working? A: It normally stays functional. HYTOPTODEVICE Arista pre-coded 40G QSFP+ fan-out DAC uses MSA standard EEPROM chips compatible with regular firmware upgrades, though rare aggressive OEM firmware revisions may block third-party media.
Q3: Can I reprogram or recode this 40G QSFP+ to quad 10G SFP+ breakout copper cable myself if I change my switch vendor later? A: Yes, recoding is supported. HYTOPTODEVICE supplies dedicated EEPROM programming hardware and software for this 40G QSFP+ to quad 10G SFP+ breakout copper cable. We provide simple step-by-step guides or remote technical support for easy operation.
Q4: Why does my switch show an "unsupported optic detected" warning even though the link comes up with this Arista EOS ready 40G fan-out DAC? A: This is common on enterprise switches. The system checks vendor signatures and generates syslog alerts while forwarding traffic normally. HYTOPTODEVICE Arista EOS ready 40G fan-out DAC is pre-flashed to reduce such warning logs.
Q5: Can I use this open networking 40G to 4x10G passive breakout cable on a generic white-box switch running SONiC or Cumulus Linux? A: Yes, open-source network OS usually accepts standard DAC media without vendor lock restrictions. HYTOPTODEVICE validates this open networking 40G to 4x10G passive breakout cable on SONiC and Cumulus platforms.
Q6: What is the maximum distance supported by this intra-rack 40G QSFP+ passive breakout DAC twinax cable? A: Our intra-rack 40G QSFP+ passive breakout DAC twinax cable supports a maximum reliable reach of 7 meters. Passive copper suffers high-frequency signal attenuation, designed only for short rack internal connections.
Q7: Will I experience packet loss or high latency with this low latency 40G breakout direct attach copper cable? A: No, there is no extra latency or packet loss within rated distance. Passive copper has no signal retiming chips. This HYTOPTODEVICE low latency 40G breakout direct attach copper cable delivers near-zero latency for local rack links.
Q8: Is there any signal degradation if this shielded 40G QSFP+ breakout twinax cable is bundled tightly with power cables? A: EMI-related signal degradation risk exists. Copper twinax is sensitive to electrical interference. Even with full shielding on our HYTOPTODEVICE shielded 40G QSFP+ breakout twinax cable, avoid tight parallel routing next to high-voltage power wires.
Q9: Will this storage friendly 4x10G breakout DAC support FCoE (Fibre Channel over Ethernet) or iSCSI storage traffic? A: Yes, it supports all standard layer 2 / layer 3 traffic. This HYTOPTODEVICE storage friendly 4x10G breakout DAC is protocol-agnostic, compatible with Ethernet, FCoE, iSCSI and InfiniBand.
Q10: Can I run jumbo frames (e.g., 9000 MTU) through this jumbo frame capable 40G to four 10G SFP+ breakout cable? A: Yes, jumbo frames pass transparently. Passive copper does not process frame payloads. HYTOPTODEVICE jumbo frame capable 40G to four 10G SFP+ breakout cable supports standard and 9000 MTU frames without fragmentation.
Q11: Why is my link status showing "down/down" after plugging in this plug-and-play 40G QSFP+ breakout fan-out cable? A: Three main root causes lead to down links: missing breakout port configuration, mismatched EEPROM coding, or loose copper contacts. Enable EOS breakout mode before deploying the HYTOPTODEVICE plug-and-play 40G QSFP+ breakout fan-out cable.
Q12: Can I plug the 10G SFP+ tails of this 40G breakout fan-out copper cable into legacy 1G (Gigabit) switch ports? A: No, down negotiation to 1G will not work. SFP+ hardware is built for 10Gbps operation. The SFP+ legs of this HYTOPTODEVICE 40G breakout fan-out copper cable cannot interoperate with 1G SFP ports.
Q13: Are the individual 10G channels numbered in a specific order at the breakout end of this lane marked 40G to 4x10G DAC cable? A: Yes, lanes follow fixed standard mapping. Each breakout leg is clearly labeled with lane ID matching the switch’s internal channel layout. HYTOPTODEVICE lane marked 40G to 4x10G DAC cable simplifies on-site deployment.
Q14: Do I need to clean copper contact pins of this copper contact 40G QSFP+ breakout DAC like optical fiber connectors? A: Optical cleaning pens are unnecessary, but contact protection matters. Never touch gold pins directly by hand, and keep connectors dust-free for stable links on this HYTOPTODEVICE copper contact 40G QSFP+ breakout DAC.
Q15: What wire gauge (AWG) is used on this flexible 0.5m 40G QSFP+ breakout twinax cable, and does it affect cable flexibility? A: This 0.5m model uses 30AWG twinax. 30AWG delivers superior flexibility while maintaining stable signal integrity for short lengths; thicker gauges offer better signal performance at longer distances but are stiffer.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




