• HYTOPTODEVICE compatible 400G QSFP-DD passive copper twinax cable 0.5m
  • 0.5m  compatible 400G QSFP-DD to QSFP-DD PAM4 passive copper twinax cable for data center
  • 400G QSFP-DD DAC twinax cable HYTOPTODEVICE
  • 400G QSFP-DD passive direct attach copper cable from hytoptodevice
  • HYTOPTODEVICE compatible 400G QSFP-DD passive copper twinax cable 0.5m
  • 0.5m  compatible 400G QSFP-DD to QSFP-DD PAM4 passive copper twinax cable for data center
  • 400G QSFP-DD DAC twinax cable HYTOPTODEVICE
  • 400G QSFP-DD passive direct attach copper cable from hytoptodevice

Arista CAB-D-D-400G-0.5 Compatible 400G QSFP-DD to QSFP-DD Passive Copper Twinax Cable 0.5m(1.67ft)PAM4 | HYTOPTODEVICE

HYTOPTODEVICE, trusted supplier of 400G QSFP-DD passive copper twinax cable, Arista CAB-D-D-400G-0.5 compatible 0.5m 400G DAC twinax cable, bulk wholesale, pre-coded for Arista EOS, low latency for 400G AI data center intra-rack short jumpers.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QDD-400-CU0.5M
2 Arista Networks CAB-D-D-400G-0.5
3 Dell  DAC-Q56DD-400G-0.5M 
4 NVIDIA/Mellanox  MCP1660-W00AE30
5 H3C QSFPDD-400G-D-CAB-0.5M
6 Generic QSFPDD-400G-CUxM
Description

Arista CAB-D-D-400G-0.5 Compatible 400G QSFP-DD to QSFP-DD  Passive Copper Twinax Cable 0.5m(1.67ft)PAM4 | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE’s 0.5m 400G QSFP-DD to QSFP-DD passive copper twinax cable is fully compatible with Arista CAB-D-D-400G-0.5. Built to IEEE 802.3ck and SFF-8636 standards, this zero-power PAM4 400G QSFP-DD passive copper twinax cable adopts 30AWG controlled-impedance copper conductors, supporting stable 400Gbps transmission over 8×50G PAM4 lanes. Factory pre-programmed with Arista-matched EEPROM, it delivers plug-and-play performance on Arista QSFP-DD switches and adapters. Every cable undergoes rigorous signal integrity testing covering insertion loss, return loss and crosstalk. Ideal for ultra-short 0.5m intra-rack jumpers inside dense AI racks, stacked switch links, server-to-leaf switch connections and 400G fabric upgrades. HYTOPTODEVICE provides bulk wholesale, custom EEPROM programming and flexible MOQ for this 400G QSFP-DD passive copper twinax cable.

Key Technical Specifications

Arista Compatible
CAB-D-D-400G-0.5
Vendor Name HYTOPTODEVICE
Connector QSFP-DD to QSFP-DD Max Data Rate 400Gbps
Cable Length 0.5m (1.67ft) Wire AWG AWG 30
Cable Type Passive Twinax Power Consumption ≤0.25W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols IEEE 802.3cd, QSFP-DD MSA, CMIS 4.0
Minimum Bend Radius 35mm Application 400G Ethernet and InfiniBand EDR

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Setting: Host QSFP-DD port must enable 400GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.

  • Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.sharp bends degrade 400G PAM4 signals and trigger link errors.

  • Port Installation Standard: Works only with standard QSFP-DD 400G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.

  • Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated Arista Hardware & Firmware

  • Arista 7804, Arista 7808, Arista 7816 QSFP-DD leaf-spine switches
  • Arista 7500, Arista 7504, Arista 7508 high-density 400G switches
  • Arista 7368, Arista 7328 QSFP-DD data center switches
  • Arista QSFP-DD 400G adapter modules
  • Arista DCS-7800, DCS-7500 series fixed and modular chassis
  • EOS 4.28.1F, EOS 4.29.2F, EOS 4.30.1F, EOS 4.31 and newer firmware releases
  • Arista CloudVision, eAPI, TerminAttr compatible

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 400G QSFP-DD passive copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 

• Ultra-short 0.5m intra-rack server to Arista leaf switch interconnection
• Dense AI computing rack 400G high-speed fabric cabling
• Stacked 400G switch short jumper links
• Data center 400G leaf-spine network upgrade and expansion
• Bulk procurement for system integrators and data center distributors
• Lab POC testing for 400G PAM4 QSFP-DD passive links


Connectivity Solutions(Applications) 

1. 400G to 400G Direct Link for Switch-Switch
hytoptodevice bulk 400G short-reach DAC twinax cable for switch to swith link


2. 400G to 400G Direct Link for Switch-NIC
hytoptodevice 400G QSFP-DD to QSFP-DD copper twinax cable for data center,hpc


3. 400G Data Center Networking Solution for HPC

hytoptodevice 400G QSFP-DD DAC cable for 400G data center


The Core Feature

1.Two Parts Out. One Cable In.

The 400G passive DAC cable runs on a single twinax copper link, replacing the fiber pair and two transceivers — plug-and-play 400G for short-reach runs, nothing more to install.

hytoptodevie third-party compatible 400G QSFP-DD passive twinax cable

2. Zero Power Draw. Zero Added Heat.

No power. No heat. No compromise. The 400G QSFP-DD passive DAC cable keeps dense racks cool while sustaining a low-latency 400G link for in-rack and adjacent-rack connections.

400G QSFP-DD to QSFP-DD passive direct attach copper twinax cable for data center switch

3.Verified on Your Host. Ready on Arrival

Every 400G passive DAC twinax cable is matched and validated against the exact switch it will plug into — checked, then shipped. Deploy with zero guesswork: no link flaps, no port lockouts, no compatibility surprises. Unsure it matches your setup? Send us your switch model — we'll confirm compatibility before you order. Compatibility Video available upon request.

hytoptodevice wholesale 400G QSFP-DD passive attach copper twinax cable for data center

4. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE  QSFP-DD  to QSFP-DD 400g direct attach copper cable for switches

FAQ

Q1: Will this 400G QSFP-DD cable work with my Cisco, Arista, or Dell switches? A1: It depends on EEPROM coding. HYTOPTODEVICE 400G QSFP-DD passive copper twinax cables support single-vendor or dual-vendor programming. With matched coding, it achieves plug-and-play connectivity on Cisco, Arista, Dell and other MSA-compliant QSFP-DD switches.

Q2: Is a QSFP-DD cable backward compatible with older QSFP28 (100G) or QSFP56 (200G) ports? A2: Physically, QSFP-DD ports are designed to accept older QSFP28 or QSFP56 modules with certain physical and software limitations. However, this 400G QSFP-DD DAC cannot operate when inserted into legacy 100G/200G ports because of mismatched form factor and electrical lane definition.

Q3: Will using a third-party 400G DAC cable void my network hardware warranty? A3: It will not automatically void your switch warranty. Our HYTOPTODEVICE 400G passive copper twinax cable follows MSA and IEEE 802.3ck standards. Vendors only reject warranty claims when cable defects directly cause permanent port damage.

Q4: Can I connect different brands of network interface cards (NICs) on each end of the cable? A4: Yes, provided each end is correctly coded or compatible with the respective hardware requirements of the connected servers or switches. HYTOPTODEVICE offers dual-sided custom EEPROM coding service to support mixed-brand NIC interconnection for bulk deployments.

Q5: Do these cables support standard link auto-negotiation? A5: Yes. This HYTOPTODEVICE 400G QSFP-DD passive copper twinax cable supports IEEE auto-negotiation. The negotiation function is handled by the switch/NIC firmware, not the passive cable itself.

Q6: What is the maximum recommended cable length for passive 400G copper twinax? A6: Our maximum supported length for passive 400G QSFP-DD copper twinax is 3 meters. HYTOPTODEVICE supplies 0.5m, 1m, 2m and 3m variants; passive copper cannot maintain 400G PAM4 signal integrity beyond 3m.

Q7: How does the latency of a 400G copper DAC compare to fiber optic cables? A7: 400G DAC copper latency is lower than fiber. Light travels slower in glass than electrical signals in copper, and DAC removes transceiver chip delay. HYTOPTODEVICE 400G twinax delivers ultra-low latency ideal for AI cluster workloads.

Q8: What wire gauge (AWG) is typically used in 400G QSFP-DD cables? A8: Short lengths including 0.5m and 1m use 30AWG for better flexibility. 2m and 3m versions adopt 28AWG to minimize signal attenuation. HYTOPTODEVICE matches the proper AWG for every length to stabilize 400G PAM4 signal transmission.

Q9: Can a 400G DAC cable handle sustained line-rate traffic without packet loss? A9: Yes, within rated length and proper operating conditions. Every HYTOPTODEVICE 400G QSFP-DD passive copper twinax cable passes line-rate burn-in testing, supporting continuous 400G line-rate traffic with zero packet loss.

Q10: Can I use this cable for InfiniBand NDR or Ethernet applications? A10: It depends on EEPROM and host configuration. Our HYTOPTODEVICE 400G QSFP-DD DAC can be coded for Ethernet or InfiniBand NDR; please specify your required mode when placing bulk orders.

Q11: What kind of latching mechanism do QSFP-DD connectors use? A11: They use standard bail-clasp pull-tab latches. This is the mainstream design for HYTOPTODEVICE QSFP-DD cables, allowing easy, tool-free insertion and removal without damaging ports or connectors.

Q12: Can I run a 400G copper DAC between different server racks? A12: Not recommended for most cross-rack deployments. Our passive 400G twinax max reach is 3m, which is only suitable for adjacent racks. Longer cross-rack links require 400G AOC fiber cables instead.

Q13: What color options are generally available for the cable jacket? A13: Standard jacket color is black. HYTOPTODEVICE also supports custom jacket colors for bulk OEM orders, you can submit color requirements together with your EEPROM coding request before production.

Q14: What happens if the cable is plugged in incorrectly or the link fails to come up? A14: The link will not establish and the switch may log link-down errors. Check proper seating, verify EEPROM coding matches your hardware, and inspect for over-bending. HYTOPTODEVICE technical team helps troubleshoot link-up issues.

Q15: Why are 400G DAC cables significantly cheaper than 400G optical transceivers? A15: Passive DAC has no optical chips, lasers or photodiodes. HYTOPTODEVICE 400G QSFP-DD passive copper twinax cable uses only copper and shielding materials, cutting component cost compared to optical transceiver modules.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • HYTOPTODEVICE compatible 400G QSFP-DD passive copper twinax cable 0.5m
  • 0.5m  compatible 400G QSFP-DD to QSFP-DD PAM4 passive copper twinax cable for data center
  • 400G QSFP-DD DAC twinax cable HYTOPTODEVICE
  • 400G QSFP-DD passive direct attach copper cable from hytoptodevice

Download