487649-B21 HPE BladeSystem Compatible SFP+ DAC Cable 50cm | 10GBASE-CU Passive Copper Twinax Cable HYTOPTODEVICE
Product Overview
HYTOPTODEVICE is a reliable sfp+ dac cable manufacture, providing this 487649-B21 HPE BladeSystem compatible 50cm 10GBASE-CU SFP+ passive twinax DAC cable. This passive copper direct attach cable features near-zero power draw and ultra-low latency, manufactured following MSA and SFF-8431 standards. It is specially designed for short internal connections within HPE BladeSystem enclosures, blade servers and associated network switches. Every cable undergoes full continuity and signal integrity testing before delivery. We support sample verification, custom EEPROM programming, OEM private labeling and bulk manufacturing orders with flexible MOQ for server integrators, data center operators and global distributors. All products are covered by our 5-year factory warranty.
Key Technical Specifications
| HPE Compatible |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
0.5m (1.6ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
23mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated HPE Hardware & Firmware
● HPE BladeSystem c7000 enclosure interconnect switches
● HPE BladeSystem c3000 series blade server chassis
● HPE 6125XLG / 6127XLG Blade switches
● HPE ProLiant BL series blade servers with SFP+ ports
● HPE 10G SFP+ mezzanine network adapters for blade servers
Minimum supported firmware: HPE Onboard Administrator and VC Connect Manager standard release
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this sfp+ dac cable manufacture product supports mixed-vendor networking hardware. It interoperates smoothly with Cisco, Arista, Brocade, Dell, Juniper, NVIDIA Mellanox and other mainstream 10G SFP+ switches and NICs, suitable for mixed-brand rack stacking and server fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
● Short internal 10G links inside HPE BladeSystem c7000 / c3000 chassis
● Blade server to interconnect switch connections within the same enclosure
● Low-latency 10G fabric for virtualization and hyper-converged blade infrastructure
● Dense blade cabinet 10G networking for enterprise and cloud data centers
● Intra-chassis short connections for HPE Virtual Connect fabric
● Bulk supply for server distributors, blade system integrators and IT contractors
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the SFP+ DAC cable replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive SFP+ 10G DAC draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP+ passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: Can HYTOPTODEVICE 487649-B21 work plug-and-play on genuine HPE BladeSystem c-Class chassis?
A: Absolutely, preloaded exclusive HPE EEPROM enables hot-plug directly without firmware update or hardware incompatibility warning on all certified HPE blade platforms.
Q2: Does HYTOPTODEVICE passive 487649-B21 DAC support DDM/DOM real-time digital diagnostic monitoring?
A: No, passive twinax design excludes monitoring circuit & chip; only basic part number info stored in EEPROM, pick active DAC variant if real-time port monitoring is required.
Q3: What is fixed standard length of HPE 487649-B21 replacement DAC?
A: Standard factory spec is 0.5M for in-chassis ultra-short connection; HYTOPTODEVICE stocks alternative 0.3/1/2/3M DAC for various rack layout customization.
Q4: Is HYTOPTODEVICE 487649-B21 compatible with non-HPE SFP+ switches and third-party server NIC?
A: Yes, fully MSA-compliant design guarantees universal interoperability with all mainstream SFP+ interface network hardware across global top networking brands.
Q5: What cost advantage choosing HYTOPTODEVICE vs original HPE OEM 487649-B21 cable?
A: Identical compatibility & transmission performance as genuine HPE part, 40%~58% lower bulk purchase cost, in-stock fast global shipment and factory direct after-sales support.
Q6: Does 487649-B21 passive DAC support hot-swap under powered-on HPE blade/server status?
A: Designed per SFP+ industry hot-plug specification, safe plug/unplug without shutting down running HPE BladeSystem or rack servers.
Q7: How much power consumption per end for HYTOPTODEVICE 487649-B21 passive twinax DAC?
A: Max power consumption ≤0.1W per connector, ultra energy-saving for large-scale HPE blade IDC deployment.
Q8: What operating temperature range for regular data center indoor usage?
A: Commercial grade working range: 0℃~70℃; wide industrial temp customized DAC available upon large bulk OEM order for non-air-conditioned harsh cabinet environment.
Q9: Does HYTOPTODEVICE offer private label OEM & customized cable marking for global network distributors?
A: Flexible low MOQ supports custom laser marking, neutral private packaging and personalized EEPROM programming for worldwide reseller OEM business.
Q10: What’s the official warranty policy of HYTOPTODEVICE 487649-B21 compatible DAC?
A: All stocked HPE replacement DAC items enjoy 5-year factory warranty, free replacement for defective goods under standard installation & normal operating conditions.
Q11: Can this HPE BladeSystem DAC run links between dissimilar vendor network hardware?
A: Yes, it can establish a working link if both switches support 10GBASE-CU and do not enforce strict vendor lock. HYTOPTODEVICE SFP+ passive DAC cables follow MSA standards for cross-brand interconnection, we suggest sample testing prior to mixed-vendor deployment.
Q12: What triggers transceiver unsupported alerts on HPE blade switches with third-party DAC?
A: The switch firmware did not recognize the EEPROM code. You can bypass this on some platforms via CLI commands (e.g., service unsupported-transceiver on Cisco), but buying pre-coded compatible cables prevents these warnings. HYTOPTODEVICE pre-writes dedicated codes and conducts target-device testing before shipment to resolve this issue effectively.
Q13: Will MSA-standard 10G copper DAC guarantee seamless operation across every brand of network hardware?
A: MSA (Multi-Source Agreement) compliance guarantees physical dimensions and electrical standards. While generic MSA cables work on open platforms like MikroTik or Netgear, locked systems like Cisco or HP ProCurve require proprietary EEPROM signatures. Every HYTOPTODEVICE cable passes target switch testing before shipment to reduce deployment risk.
Q14: What is the maximum cable reach supported by passive 10G SFP+ twinax copper cables?
A: Standard 10G passive twinax DAC supports up to 7 meters. Our 487649-B21 HPE BladeSystem compatible 50cm SFP+ passive DAC is optimized for ultra-short blade chassis connections with excellent signal integrity.
Q15: How do I select the correct wire gauge of SFP+ DAC for my blade cabinet cabling layout?
A: Use 30AWG for 0.5m–2m (maximum flexibility), 26AWG for 3m–5m (balanced), and 24AWG for 5m–7m (thicker, lower signal loss). Our 0.5M HPE BladeSystem DAC adopts 30AWG which suits dense blade chassis cabling perfectly.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

