| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP56-200G-AOC10M | |
| 2 | Arista Networks | A-Q200-Q200-10M | |
| 3 | HPE Aruba | QSFP56-200G-AOC10M | |
| 4 | Intel | QSFP56-200G-AOC10M | |
| 5 | NVIDIA/Mellanox | MFS1S00-V010E | |
| 6 | H3C | QSFP56-200G-AOC10M |
Key Technical Specifications
| Cisco Compatible |
QSFP56-200G-AOC10M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP56 to QSFP56 | Max Data Rate | 200Gbps |
| Operating Wavelength | 850nm | Fiber Cable | OM4 MMF |
| Cable Length | 10m (33ft) | Power Consumption | ≤4.5W |
| Host Required | FEC | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Minimum Bend Radius | 30mm | Protocols | IEEE 802.3, QSFP56 MSA, SFF-8665, SFF-8636 |
| Application |
200G-SR4 Ethernet
|
Warranty | 5 Years |
Usage Guidelines & Best Practices
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 200g qsfp56 aoc active optical cable supports mixed-vendor networking hardware. It can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, suitable for mixed-vendor rack stacking and AI server fabric expansion.






Q1: Will form factor and physical dimension differences cause fit issues between QSFP56 AOC and QSFP-DD ports? A: Yes. QSFP56 and QSFP-DD have distinct housing sizes and pin arrangements. This Cisco compatible 200g qsfp56 aoc active optical cable cannot insert into QSFP-DD slots, a critical point for buyers planning mixed-form-factor data center upgrades.
Q2: Can I configure this straight 200G QSFP56 AOC to split into dual independent 100G data streams? A: No. This is a non-breakout direct 200G AOC assembly. It transmits one unified 200G PAM4 signal and cannot separate into two 100G links; contact HYTOPTODEVICE if you need breakout-style 200G AOC solutions.
Q3: Is there a high chance this AOC will trigger unrecognized module alerts on Cisco enterprise switches? A: It will not trigger warnings with our custom EEPROM programming service. HYTOPTODEVICE calibrates module information to match Cisco platforms for this 200g qsfp56 aoc active optical cable, simplifying large-scale rack deployment.
Q4: Can this Cisco 200G QSFP56 AOC support InfiniBand HDR and HDR100 high-speed transmission? A: It works reliably for HDR100 200G transmission on matching QSFP56 ports. This 10m Cisco compatible AOC follows MSA electrical specifications, ideal for hybrid Ethernet and InfiniBand HDR100 HPC cluster interconnections.
Q5: Does this 200G QSFP56 AOC support cross-brand interconnection between different vendor network devices? A: Yes. Designed around MSA open standards, this 200g qsfp56 aoc active optical cable delivers stable cross-vendor interoperability to connect Cisco, Arista, Dell and other compatible hardware for multi-brand fabric builds.
Q6: How does the transmission latency of QSFP56 AOC compare with DAC cables and standalone optical transceivers? A: AOC latency is slightly higher than DAC, roughly 5–10 ns. The small optical-electrical conversion delay is negligible for most AI and HPC workloads, while this 10m AOC provides far longer reach than copper DAC alternatives.
Q7: What is the power draw of each end of this 200G QSFP56 AOC, and how does it compare with competing products? A: Power consumption is 4.5W per end. Our HYTOPTODEVICE 200G QSFP56 AOC features optimized circuitry, delivering lower power consumption than many competing AOC models to reduce rack heat load.
Q8: Will electromagnetic interference from nearby power cables degrade the signal quality of this AOC? A: No. Data travels via light over glass fiber instead of copper conductors. This Cisco compatible AOC is fully EMI immune, making it suitable for routing near power supplies in high-density and electrically noisy rack environments.
Q9: What is the maximum bandwidth each individual lane can support on this 200G QSFP56 AOC? A: Each lane supports 50Gbps PAM4. Four parallel lanes combine to deliver the full 200G aggregate bandwidth of this 200g qsfp56 aoc active optical cable for AI compute and storage interconnections.
Q10: Does cable length difference bring obvious signal attenuation when comparing long and short OM4 AOC variants? A: Optical loss rises marginally with length within OM4’s rated transmission range. The attenuation remains well within acceptable limits; our 10m stock model maintains clean signals for cross-rack leaf-spine uplinks.
Q11: What advantages make integrated AOC a better choice than purchasing two separate 200G transceivers plus fiber patch cords? A: Factory pre-terminated AOC reduces installation steps and potential failure points. For short-distance transmission runs below 30 meters, the AOC solution is highly recommended for data center operators, and our HYTOPTODEVICE 200G QSFP56 AOC is a cost-effective option for bulk rollout.
Q12: If one transceiver connector is damaged, can I just replace the faulty end instead of swapping the whole cable? A: No. The AOC is a sealed integrated optical assembly. If one transceiver end fails, the entire cable needs replacement. HYTOPTODEVICE maintains fast lead times for replacement orders of this 200g qsfp56 aoc active optical cable.
Q13: What minimum bend radius should installers follow when routing this 200G QSFP56 AOC in tight rack spaces? A: The minimum bend radius is 30mm. Bending tighter than this threshold will create extra optical attenuation, installers must follow this specification during cabling for this 10m Cisco compatible AOC.
Q14: Is the pull-tab latch design prone to breakage during frequent hot plugging and maintenance? A: No. The pull tab is reinforced for repeated plug-and-unplug cycles. Our 200g qsfp56 aoc active optical cable uses robust latch tabs to withstand regular hot swapping during data center maintenance.
Q15: How does the weight of a long-length 200G AOC compare to twinax DAC cables of the same length? A: AOC is significantly lighter than equivalent twinax DAC. Optical fiber is much less dense than copper, so even longer AOCs cut port strain and streamline cable management in tall, densely packed server racks.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






