• hytoptodevice cisco compatible active fiber optic cable
  • hytoptodevice  compatible active fiber optic cable for data center
  • hytoptodevice sfp+ 10g active optical cable for data center
  • hytoptodevice sfp+aoc cable
  • hytoptodevice cisco compatible active fiber optic cable
  • hytoptodevice  compatible active fiber optic cable for data center
  • hytoptodevice sfp+ 10g active optical cable for data center
  • hytoptodevice sfp+aoc cable

Cisco SFP-10G-AOC5M Compatible 10G SFP+ TO SFP+ Active Fiber Optic Cable​ 5m(16ft) Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE, your reliable cisco active fiber optic cable supplier, provides Cisco SFP-10G-AOC5M compatible 10G SFP+ to SFP+ active fiber optic cable, 5m multimode AOC, DDM supported, MSA compliant, bulk wholesale for Cisco data center switch stacking and server uplink.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco SFP-10G-AOC5M
2 Arista Networks AOC-S-S-10G-5M
3 Dell CBL-10GSFP-AOC-5M
4 Juniper Networks  JNP-10G-AOC-5M
5 H3C SFP-XG-D-AOC-5M
6  Brocade  10G-SFPP-AOC-0501
Description

Cisco SFP-10G-AOC5M Compatible 10G SFP+ TO SFP+ Active Fiber Optic Cable​ 5m(16ft) Bulk Wholesale | HYTOPTODEVICE


Product Overview

As a professional cisco active fiber optic cable supplier, HYTOPTODEVICE’s 5m Cisco SFP-10G-AOC5M compatible 10G SFP+ to SFP+ active fiber optic cable complies with SFF-8431 MSA and 10GBASE-R standards. Pre-coded for Cisco IOS, this lightweight multimode fiber AOC delivers stable 10Gbps transmission with strong EMI immunity for intra-rack and short inter-rack stacking and server uplink. Bulk wholesale, OEM and custom EEPROM programming are available for data center integrators.

Key Technical Specifications

Cisco Compatible
SFP-10G-AOC5M
Vendor Name HYTOPTODEVICE
Connector SFP+ to SFP+ Max Data Rate 10Gbps
Operating Wavelength 850nm Fiber Cable OM3 MMF
Cable Length 5m (16ft) Power Consumption ≤0.8W
Jacket Material OFNP Operation Temperature 0~ 70 °C (32 to 158°F)
Minimum Bend Radius 30mm Protocols 1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel
Application 10G Ethernet Warranty 5 Years

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Verify your Cisco IOS firmware version before installation to ensure normal module recognition.

  • Do not bend the cable below the minimum bend radius to prevent internal fiber damage.

  • Keep the SFP+ connector end clean; avoid dust and scratches on optical contact surface.

  • Hot-swap supported; insert and remove the cable gently without excessive force.

  • Run link health check after installation to confirm 10G link status.
  • Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid high temperature, humid and dusty harsh environment for long-term operation.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated Cisco Hardware & Firmware

• Cisco Catalyst 3650 10G uplink switches
• Cisco Catalyst 3850 stackable 10G switches
• Cisco Nexus 9000 series 10G data center switches
• Cisco UCS C220 / C240 rack servers with SFP+ ports
• Cisco IOS-XE 16.x and newer firmware releases

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 10G SFP+ active fiber optic cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell and more, for mixed-vendor rack stacking and server interconnection.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 

• Intra-rack and short inter-rack 10G interconnection for Cisco enterprise switch stacking

• 10G server uplink connections in medium and large data centers
• 10G link replacement for copper twinax cables where longer reach is required
• 10G network upgrade for enterprise campus and server room
• Bulk procurement for IT distributors and integrators sourcing from a trusted cisco active fiber optic cable supplier
• Lab POC validation for 10GBASE-R SFP+ optical links


Connectivity Solutions(Applications) 

1. 10G to 10G Direct Link for Switch-Switch
hytoptodevice compatible sfp+ 10g active fiber optic cable for switch to switch

2. 10G to 10G Direct Link for Switch-NIC
hytoptodevice sfp+ 10g active optic cable for data center

3. Leaf-spine Architecture

SFP+ 10G active optical cable aoc from hytoptodevice


The Core Feature

1. Simplified Short-Reach Interconnect

Using AOC way replaces traditional solution, makes short-reach easy, no cleaning, lower total cost. perfect for In-rack & adjacent-rack links.

HYTOPTODEVICE active fiber optic cable FOR SHORT reach

2. High-Density 10G Connectivity for Data Center

Supports steady 10Gbps 10GBASE-R transmission. Slim and lightweight fiber design eases dense cable routing, ideal for high-port-count SFP+ switch deployments inside data center racks.

hytoptodevice 10g sfp+ active optical vs copper cables

3.Pre-Tested on Real Switches

Each 10G SFP+ AOC is validated on actual host switches before delivery — instant link-up, zero surprises, zero downtime.

hytoptodevice bulk wholesale sfp+ 10g aoc cabe for data center

4. 100% Unit-Level Testing — Zero Sampling

Every single unit is individually validated for optical compliance and long-term stability before packing — no batch sampling, no shortcuts, no exceptions. Unit after unit, the performance stays identical. Take a virtual tour of our Test Center.

HYTOPTODEVICE supply 10G SFP+ AOC active optical cable



FAQS

Q1: Can this Cisco compatible 10G SFP+ active fiber optic cable work reliably in multi-vendor network environments? A: Yes, our HYTOPTODEVICE cisco active fiber optic cable follows MSA standards, supporting cross-brand interoperability. It can establish stable 10G links on Cisco, HPE, Dell and other standard SFP+ platforms for mixed-vendor rack deployments.

Q2: Will this 5m 10G SFP+ AOC auto negotiate down to 1G speed when connected to legacy Gigabit SFP hardware? A: No, this 5m cisco active fiber optic cable is designed for fixed 10GBASE-R operation. It cannot negotiate down to 1G speed and will not run on legacy Gigabit SFP ports.

Q3: Will deploying third-party MSA compliant active fiber optic cables void the hardware warranty of my Cisco switches? A: Generally, MSA-compliant third-party AOCs such as our cisco active fiber optic cable from HYTOPTODEVICE will not damage your switch hardware. Warranty policies differ by vendor; you may confirm details with your hardware support team.

Q4: Can I access real-time optical diagnostic parameters from this active fiber optic cable via Cisco IOS CLI? A: Absolutely. This cisco active fiber optic cable supports full DDM/DOM function. You can check transmit optical power, receive optical power and module temperature directly via Cisco IOS command lines.

Q5: Does this 5m SFP+ active fiber optic cable satisfy global industry compliance requirements for data center networking projects? A: Yes. As a professional cisco active fiber optic cable supplier, HYTOPTODEVICE ensures this AOC meets SFF-8431 and 10GBASE-R MSA specifications, plus RoHS and REACH compliance for global Cisco networking and data center deployments.

Q6: What key benefits make active fiber AOC a better cabling choice than SFP+ twinax DAC for longer distance Cisco rack connections? A: SFP+ DAC transmits signals over copper, while our cisco active fiber optic cable uses internal multimode fiber. It is lighter and immune to EMI, supporting longer reach for inter-rack cabling in Cisco data center environments.

Q7: Is it possible to cut and re-terminate this active fiber optic cable on site to get a custom length? A: No. Cutting the AOC will destroy the integrated optical transceiver assemblies at both ends. Contact HYTOPTODEVICE, your trusted cisco active fiber optic cable supplier, to order custom lengths matching your exact cabling layout.

Q8: What latency performance should I expect from this 5-meter 10G active fiber optic cable for Cisco switch stacking? A: This 5m cisco active fiber optic cable delivers ultra-low, predictable latency for enterprise and data center workloads. Optical AOC latency remains steady for Cisco switch stacking uplink connections.

Q9: Can this Cisco compatible 10G AOC run continuous full line-rate traffic without packet loss during long-term data center operation? A: Yes. Every cisco active fiber optic cable from HYTOPTODEVICE completes 24-hour burn-in testing. It supports sustained full 10G line-rate traffic with zero packet loss under normal operating conditions.

Q10: What fiber type and optical transmitter components are built inside this 10G SFP+ active fiber optic cable assembly? A: This cisco active fiber optic cable adopts multimode fiber paired with 850nm VCSEL transmitters, the standard fiber core for short-reach 10G SFP+ active fiber optic cable solutions.

Q11: How flexible is this 10G active fiber optic cable, and what hazards come with tight bending during cable routing? A: The fiber AOC is more flexible than copper DAC, but it has a strict minimum bend radius. Sharp, tight bends will crack the internal fiber and trigger unstable links or permanent failure of your cisco active fiber optic cable.

Q12: Does the weight of SFP+ active fiber optic cables create pulling strain on the SFP+ port sockets of Cisco switches? A: Compared with heavy copper twinax DAC, this lightweight cisco active fiber optic cable places minimal stress on SFP+ ports. We recommend cable management brackets to support connectors in high-density Cisco switch cabinets.

Q13: What cleaning and preparation work is needed for optical end faces before installing this AOC on Cisco network hardware? A: Dust and oil residue on optical end faces reduce optical power and cause link flapping. Clean the SFP+ optical tips before plugging in our HYTOPTODEVICE cisco active fiber optic cable for stable performance.

Q14: Does this active fiber optic cable support hot swap while the Cisco switch stays powered up? A: Yes. This cisco active fiber optic cable supports hot swap. You can insert or remove the cable while the Cisco switch stays powered on without hardware damage.

Q15: How does lightweight active fiber AOC improve airflow and thermal dissipation inside dense Cisco switch racks? A: Our slim, lightweight cisco active fiber optic cable reduces bulky cable congestion inside racks. Less cable clutter clears air passages, improves cooling airflow and lowers thermal risks for high-density 10G Cisco switch fabrics.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • hytoptodevice cisco compatible active fiber optic cable
  • hytoptodevice  compatible active fiber optic cable for data center
  • hytoptodevice sfp+ 10g active optical cable for data center
  • hytoptodevice sfp+aoc cable

Download