| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-10G-AOC1M | |
| 2 | Arista Networks | AOC-S-S-10G-1M | |
| 3 | Dell | CBL-10GSFP-AOC-1M | |
| 4 | Juniper Networks | JNP-10G-AOC-1M | |
| 5 | H3C | SFP-XG-D-AOC-1M | |
| 6 | Extreme | 10GB-F01-SFPP | |
| 7 | Mikrotik | S+AO0001 | |
| 8 | Brocade | 10G-SFPP-AOC-0101 |
Key Technical Specifications
| Cisco Compatible |
SFP-10G-AOC1M
|
Vendor Name | HYTOPTODEVICE |
| Connector | SFP+ to SFP+ | Max Data Rate | 10Gbps |
| Operating Wavelength | 850nm | Fiber Cable | OM3 MMF |
| Cable Length | 1m (3ft) | Power Consumption | ≤0.8W |
| Jacket Material | OFNP | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Minimum Bend Radius | 30mm | Protocols | 1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Application | 10G Ethernet | Warranty | 5 Years |
Usage Guidelines & Best Practices
Verify your Cisco IOS firmware version before installation to ensure normal module recognition.
Do not bend the cable below the minimum bend radius to prevent internal fiber damage.
Keep the SFP+ connector end clean; avoid dust and scratches on optical contact surface.
Hot-swap supported; insert and remove the cable gently without excessive force.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid high temperature, humid and dusty harsh environment for long-term operation.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
• Cisco Catalyst 3650 10G uplink switches
• Cisco Catalyst 3850 stackable 10G switches
• Cisco Nexus 9000 series 10G data center switches
• Cisco UCS C220 / C240 rack servers with SFP+ ports
• Cisco IOS-XE 16.x and newer firmware releases
Built on universal MSA open standards, this 10G SFP+ active optical cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell and more, for mixed-vendor rack stacking and server interconnection.







Q1: Will this Cisco compatible 10G SFP+ AOC work normally on Cisco Catalyst and Nexus switches? A: Yes. This 1m SFP-10G-AOC1M compatible active optical cable is pre-programmed with Cisco EEPROM profile, it can be recognized automatically on most Cisco Catalyst and Nexus SFP+ ports for 10G link up.
Q2: What is the difference between 10G SFP+ AOC and 10G SFP+ DAC copper cable? A: AOC uses fiber for signal transmission, lighter and anti-EMI, while DAC uses copper twinax. This 10G AOC is better for dense cabinet wiring and EMI-sensitive environments.
Q3: Do I need to set special port commands on Cisco IOS to activate this 10G active optical cable? A: Normally no special configuration is required. Just confirm the port is set to 10G fixed speed, and the IOS version supports SFP+ AOC modules.
Q4: Can I use this 10G SFP+ AOC to connect a Cisco switch to another brand’s server NIC? A: Yes, as long as the remote device supports standard 10GBASE-R SFP+ interface and MSA-compliant modules, cross-brand connection works well.
Q5: Is this 10G SFP+ active optical cable hot-swappable during running? A: Yes, the SFP+ interface supports hot swap. You can plug or unplug the cable without powering off the switch or server.
Q6: Can this 10G AOC run 1G speed if my device port only supports 1G? A: No, this cable is designed for fixed 10GBASE-R rate, it cannot negotiate down to 1G transmission speed.
Q7: What risks will happen if I bend the 10G AOC cable too sharply? A: Excessive bending will crack the internal multimode fiber, causing unstable optical power, intermittent link flapping or permanent link failure.
Q8: Will this third-party Cisco compatible 10G SFP+ AOC void my Cisco hardware warranty? A: Different vendors have different warranty policies. Most Cisco hardware will not be damaged by MSA-compliant third-party AOC cables, but you can confirm with your Cisco support team.
Q9: Does this 1m 10G SFP+ AOC support DDM digital diagnostic monitoring? A: Yes, it supports standard DDM function, you can check optical transmit power, receive power and temperature information via Cisco IOS command.
Q10: What fiber type is used inside this Cisco compatible 10G SFP+ active optical cable? A: It adopts multimode fiber with 850nm VCSEL transmitter, which is the standard solution for short-range 10G SFP+ AOC products.
Q11: Can I get longer length options for this Cisco 10G SFP+ AOC series? A: Yes, HYTOPTODEVICE supplies 1m, 3m, 10m, 30m and other custom lengths for 10G SFP+ AOC upon bulk order request.
Q12: What kind of test will be performed on this 10G AOC before delivery? A: Every cable will pass optical power test, eye diagram test, DDM reading test and 24-hour burn-in test to eliminate unstable products.
Q13: Is this 10G SFP+ AOC suitable for outdoor cabling? A: No, this AOC is designed for indoor cabinet and data center intra-rack usage only, not waterproof and not for outdoor deployment.
Q14: Can I mix this 10G AOC with other Cisco SFP+ transceivers on the same switch? A: Yes, as long as each port is configured correctly, you can mix SFP+ AOC, SFP+ SR and SFP+ DAC on different ports of the same switch.
Q15: What warranty term do you provide for this bulk 10G SFP+ active optical cable? A: HYTOPTODEVICE provides standard warranty for all 10G SFP+ AOC products. We support RMA for defective units under normal operating conditions.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




