| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-10G-AOC15M | |
| 2 | Arista Networks | AOC-S-S-10G-15M | |
| 3 | Dell | CBL-10GSFP-AOC-15M | |
| 4 | Juniper Networks | JNP-10G-AOC-15M | |
| 5 | H3C | SFP-XG-D-AOC-15M | |
| 6 | Brocade | 10G-SFPP-AOC-1501 |
Key Technical Specifications
| Cisco Compatible |
SFP-10G-AOC15M
|
Vendor Name | HYTOPTODEVICE |
| Connector | SFP+ to SFP+ | Max Data Rate | 10Gbps |
| Operating Wavelength | 850nm | Fiber Cable | OM3 MMF |
| Cable Length | 15m (49ft) | Power Consumption | ≤0.8W |
| Jacket Material | OFNP | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Minimum Bend Radius | 30mm | Protocols | 1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Application | 10G Ethernet | Warranty | 5 Years |
Usage Guidelines & Best Practices
Verify your Cisco IOS firmware version before installation to ensure normal module recognition.
Do not bend the cable below the minimum bend radius to prevent internal fiber damage.
Keep the SFP+ connector end clean; avoid dust and scratches on optical contact surface.
Hot-swap supported; insert and remove the cable gently without excessive force.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid high temperature, humid and dusty harsh environment for long-term operation.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
• Cisco Catalyst 3650 10G uplink switches
• Cisco Catalyst 3850 stackable 10G switches
• Cisco Nexus 9000 series 10G data center switches
• Cisco UCS C220 / C240 rack servers with SFP+ ports
• Cisco IOS-XE 16.x and newer firmware releases
Built on universal MSA open standards, this 10G SFP+ aoc active optical cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell and more, for mixed-vendor rack stacking and server interconnection.







Q1: Do I need to change any switch port settings to use an AOC cable instead of regular copper or fiber? A: Normally no extra port configuration is required. This 10g sfp+ aoc active optical cable works plug-and-play for 10GBASE-R ports. Just confirm the port speed is set to 10G, same as you would for copper DAC or fiber transceivers.
Q2: Can I use this cable to connect a network switch directly to a server NIC? A: Yes. It is fully suitable for switch-to-server NIC uplink connections, one of the most common deployment scenarios for this 10G SFP+ AOC in data center clusters.
Q3: Should I specify my switch brand and model when ordering? A: Yes, please share your switch brand and exact model during order placement. HYTOPTODEVICE will pre-program the EEPROM to match your hardware for smooth recognition and avoid compatibility issues.
Q4: Will this cable report proper Digital Diagnostic Monitoring (DDM/DOM) data to my switch? A: Yes. This 10g sfp+ aoc active optical cable supports full DDM/DOM. You can read real-time transmit power, receive power, module temperature and voltage from your switch CLI.
Q5: Can I connect different brands of network interface cards (NICs) on each end? A: It can work across multi-brand NICs as long as both sides follow the SFP+ 10GBASE-R MSA standard. We recommend pre-validation for mixed-vendor setups to get stable links.
Q6: How much power does an SFP+ AOC consume compared to copper DACs? A: This SFP+ AOC consumes ≤1W, slightly higher than passive copper DAC which uses nearly zero power. The power feeds the built-in optical transceivers inside the AOC ends.
Q7: Are AOC cables immune to electromagnetic interference (EMI)? A: Yes. Unlike copper twinax cables, optical fiber carries signals by light, so this 10g sfp+ aoc active optical cable is not affected by EMI, crosstalk or nearby power cables.
Q8: Can I use an AOC cable in outdoor environments? A: No. Standard AOC jacket is designed for indoor data center and server room use only. It lacks UV protection and water resistance, outdoor deployment will cause rapid performance degradation.
Q9: What kind of latching mechanism do the SFP+ ends use? A: The SFP+ connectors adopt a standard bail-clasp latch, the widely used pull-tab style for easy insertion and removal from SFP+ ports.
Q10: What color options are available for the outer cable jacket? A: Our standard jacket is black. Custom jacket colors are available for bulk orders, you can tell us your color requirement when placing wholesale orders.
Q11: What happens if I accidentally pull on the cable jacket instead of the connector latch? A: Pulling directly on the jacket may damage the internal fiber and optical components, lead to link flapping or permanent failure. Always grip the latch tab when unplugging.
Q12: Why are AOC cables generally more expensive than DAC cables? A: AOC integrates optical transceiver chips at both ends, while passive DAC is just copper wire. The optical components and assembly process make AOC higher cost, but it supports longer transmission distance.
Q13: What warranty protection is typically provided for these cables? A: HYTOPTODEVICE provides standard warranty for this 10g sfp+ aoc active optical cable. Please contact our sales team for detailed warranty terms for bulk orders.
Q14: Are these cables tested before shipping? A: Every AOC cable goes through 24-hour burn-in test and optical performance inspection before shipment to guarantee stable 10G line-rate transmission.
Q15: How should spare AOC cables be stored? A: Keep spare AOC cables in cool, dry indoor storage. Avoid tight bending, heavy compression and dust exposure; put protective caps on optical ends when not in use.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




