| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-100G-AOC10M | |
| 2 | Arista Networks | AOC-Q-Q-100G-10M | |
| 3 | Dell | AOC-QSFP28-100G-10M | |
| 4 | Juniper Networks | JNP-QSFP28-AOC-10M | |
| 5 | NVIDIA/Mellanox | MFA1A00-C010 | |
| 6 | H3C | QSFP-100G-D-AOC-10M | |
| 7 | Brocade | QSFP28-100G-AOC-10M |
Key Technical Specifications
| Cisco Compatible |
QSFP-100G-AOC25M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP28 to QSFP28 | Max Data Rate | 100Gbps |
| Operating Wavelength | 850nm | Fiber Cable | OM3 MMF |
| Cable Length | 25m (82ft) | Power Consumption | ≤2.2W |
| Jacket Material | OFNP | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Minimum Bend Radius | 30mm | Protocols | IEEE 802.3 bm, SFF-8665 |
| Application |
100G Ethernet
|
Warranty | 5 Years |
Usage Guidelines & Best Practices
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this cisco compatible 100g qsfp28 active optical cable 25m from our factory can interoperate with mainstream network hardware for mixed-vendor rack stacking and server fabric expansion.






Q1: What transmission range can I get from a 100G QSFP28 AOC assembly?
A: 100G QSFP28 AOC solutions support reach from 1m up to 100m when paired with OM3 or OM4 multimode fiber, making this cisco compatible 100g qsfp28 active fiber optic cable 25m well suited for long intra-rack and cross-rack high-speed links inside data centers.
Q2: Can I deploy this 100G QSFP28 AOC cable outside or in uncontrolled ambient environments?
A: No. Standard enterprise-grade AOCs including our HYTOPTODEVICE 25m 100G AOC are engineered exclusively for indoor climate-controlled spaces between 0°C and 70°C, without armored jackets or weatherproof protection for outdoor exposure.
Q3: Is it feasible to run these 100G QSFP28 AOCs to connect switches on separate floors in a data center?
A: It works if your required span falls within the available AOC length options (max 100m). For multi-floor or building-to-building runs, standalone transceivers plus structured fiber cabling are generally a more practical choice.
Q4: Is split vendor coding supported if one end connects to Cisco and the other to Arista hardware?
A: Yes. HYTOPTODEVICE can deliver custom split EEPROM coding for this cisco compatible 100g qsfp28 active fiber optic cable 25m, so each connector properly handshakes with its respective brand of switch during direct interconnection.
Q5: Do these 100G AOC cables follow official MSA specifications?
A: Yes. Electrical and mechanical interfaces comply with SFF-8665 QSFP28 MSA standards, guaranteeing consistent interoperability across qualified hardware.
Q6: What causes the link to stay down once I plug in this 100G AOC cable?
A: Common triggers include port speed misconfiguration, disabled FEC, mismatched EEPROM vendor coding, or loose connector seating. Verify these items first for quick troubleshooting on your Cisco switch setup.
Q7: Can this standard QSFP28 to QSFP28 AOC split one 100G port into four independent 25G SFP28 channels?
A: Standard point-to-point 100G AOCs cannot fan out signals. If you require 4×25G breakout connectivity, you need a dedicated 100G QSFP28 to 4x 25G SFP28 breakout AOC instead.
Q8: Does this 100G QSFP28 AOC support jumbo frame transmission such as 9000-byte MTU?
A: Yes. This HYTOPTODEVICE active optical cable passes Ethernet frames transparently, supporting jumbo frames and standard frame sizes with no packet fragmentation.
Q9: Will internal fiber strands be damaged if the AOC cable is stepped on accidentally?
A: Yes. Crushing or stepping on the cable can fracture internal glass fibers, which breaks the optical path, even if there is no obvious damage visible on the outer jacket.
Q10: Are 100G AOC cables heavy enough to sag and stress switch ports?
A: No. AOCs are far lighter than copper DAC alternatives. This cisco compatible 100g qsfp28 active fiber optic cable 25m adds minimal mechanical load and eliminates port sag on switch cages.
Q11: When should passive copper DAC be selected instead of a 100G AOC?
A: Choose passive DAC when your link distance is within 2–3 meters. At 100G rates, copper reach is limited, yet DACs cost less, draw zero power and feature higher physical ruggedness for short links.
Q12: What scenario favors separate transceivers plus fiber patch cords over integrated AOC?
A: Separate optics and patch cords are better for routing through patch panels, mixing variable lengths, or replacing individual damaged fiber cords without swapping the whole cable assembly.
Q13: How can I test this 100G AOC and confirm functionality before production deployment?
A: Perform bench testing on staging switches, confirm stable link status, check interface counters for zero CRC errors, and review DOM readings to validate healthy optical power levels.
Q14: What support is available if I receive the wrong vendor coding for compatibility?
A: HYTOPTODEVICE offers flexible exchange, re-programming and return support for bulk and sample orders, solving compatibility issues when vendor coding does not match your network hardware.
Q15: How does integrated 100G AOC reduce power draw compared to separate modular optics?
A: Integrated AOC assemblies like our cisco compatible 100g qsfp28 active fiber optic cable 25m have optimized power budgets, consuming less power and producing less heat than pairs of standalone transceivers plus patch fiber.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






