| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-100G-AOC20M | |
| 2 | Arista Networks | AOC-Q-Q-100G-20M | |
| 3 | Dell | AOC-QSFP28-100G-20M | |
| 4 | Juniper Networks | JNP-QSFP28-AOC-20M | |
| 5 | NVIDIA/Mellanox | MFA1A00-C020 | |
| 6 | H3C | QSFP-100G-D-AOC-20M | |
| 7 | Brocade | QSFP28-100G-AOC-20M |
Key Technical Specifications
| Cisco Compatible |
QSFP-100G-AOC20M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP28 to QSFP28 | Max Data Rate | 100Gbps |
| Operating Wavelength | 850nm | Fiber Cable | OM3 MMF |
| Cable Length | 20m (66ft) | Power Consumption | ≤2.2W |
| Jacket Material | OFNP | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Minimum Bend Radius | 30mm | Protocols | IEEE 802.3 bm, SFF-8665 |
| Application |
100G Ethernet
|
Warranty | 5 Years |
Usage Guidelines & Best Practices
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this cisco compatible qsfp28 100g aoc active optical cable 20m from our factory can interoperate with mainstream network hardware for mixed-vendor rack stacking and server fabric expansion.






Q1: How does signal latency of this 20m cisco compatible qsfp28 100g aoc active optical cable compare to copper DAC connections? A: This cisco compatible qsfp28 100g aoc active optical cable 20m only introduces minimal nanosecond-scale latency from electro-optical conversion hardware. This tiny delay will not disrupt HPC, cloud and enterprise data center traffic delivered by HYTOPTODEVICE.
Q2: What damage may occur if I sharply bend this 20m 100G AOC and ignore the minimum bend radius requirement? A: This 100G AOC model follows a 30mm minimum bend radius specification. Sharp bends beyond this limit can fracture internal glass fibers and permanently cut off 100G signal transmission of our 20m Cisco compatible AOC.
Q3: Will running this 100G AOC alongside power distribution cables inside racks trigger signal interference? A: No. Data transmits via light pulses inside glass fiber instead of electrical signals. The cisco compatible qsfp28 100g aoc active optical cable 20m supplied by HYTOPTODEVICE is fully protected against electromagnetic interference.
Q4: Are extra-long 20m 100G QSFP28 AOC connections prone to signal jitter and bit error issues? A: No. Onboard CDR signal recovery chips inside transceivers continuously condition high-speed signals, sustaining ultra-low bit error rates for our 20m Cisco compatible AOC within complex multi-vendor fabric environments.
Q5: Can unprogrammed third-party 100G AOC work plug-and-play on Cisco and NVIDIA Mellanox switches without transceiver fault alerts? A: You must select EEPROM coding matched to your target hardware at the time of order. Incorrect coding will trigger unsupported transceiver warnings. HYTOPTODEVICE preconfigures this cisco compatible qsfp28 100g aoc active optical cable 20m for Cisco hardware compatibility.
Q6: Could Cisco firmware updates make this aftermarket 20m 100G QSFP28 AOC stop working? A: MSA-compliant EEPROM chips fitted on our 20m Cisco compatible AOC work reliably with most routine firmware upgrades. Rare strict vendor security patches may block third-party hardware, and we provide recoding support for bulk purchasers.
Q7: Do these 100G AOC units operate with white-box switches loaded with SONiC or Cumulus Linux open network operating systems? A: Yes. Open-source network operating systems rarely enforce rigid vendor lock-in restrictions. Our cisco compatible qsfp28 100g aoc active optical cable 20m supports plug-and-play installation on open networking switches.
Q8: Does each connector end of this 20m direct-attach 100G AOC require separate EEPROM tuning? A: Yes. Each QSFP28 connector end must carry EEPROM data matching the switch or server port it plugs into. HYTOPTODEVICE completes dual-end EEPROM programming for this cable based on your interconnection layout.
Q9: Is manual FEC activation on switch ports required to keep stable transmission for this extended-length 100G AOC? A: Most long-distance 100G fabric links require Reed-Solomon FEC enabled on switch ports to guarantee stable transmission. Exact settings depend on your switch vendor and link length for this cisco compatible qsfp28 100g aoc active optical cable 20m.
Q10: What CLI commands help confirm whether a Cisco switch successfully identifies this 20m 100G QSFP28 AOC transceiver? A: You may run commands including show interface transceiver or show inventory to verify module recognition status. This 20m Cisco compatible AOC supports full DDM reporting for convenient link health audits.
Q11: What troubleshooting actions resolve random link flapping after installing this 20m long inter-row 100G AOC? A: Inspect switch interface error counters, validate FEC parameter configuration, examine and clean optical contact surfaces, and analyze DOM telemetry to spot abnormal optical power readings on our cisco compatible qsfp28 100g aoc active optical cable 20m.
Q12: Does 100G QSFP28 AOC consume more power than passive twinax DAC cables? A: Yes. Laser and signal conversion circuits on both ends consume power, typically 2.0W to 3.5W per cable assembly, while passive copper DAC uses zero power. Our 20m Cisco compatible AOC adheres to standard industry power specifications.
Q13: Can inadequate rack airflow trigger overheating faults on the integrated transceivers of this long 100G AOC? A: The cisco compatible qsfp28 100g aoc active optical cable 20m operates reliably within 0°C–70°C. Enclosed racks with poor ventilation will push transceiver temperatures outside rated limits and create unstable links.
Q14: How robust are the pull tabs and latch assemblies on the QSFP28 connectors of this 20m 100G AOC? A: Standard pull-release latches are rated for 50–100 regular hot-swap cycles. Pulling the cable jacket instead of the dedicated tab will damage the latch. Every 20m Cisco compatible AOC from HYTOPTODEVICE passes latch durability testing prior to shipment.
Q15: Can field technicians splice or repair a cut or crushed 20m 100G QSFP28 AOC on site? A: No. Embedded transceivers are factory assembled with compact optical components. Field splicing is impossible, and damaged cables need full replacement. HYTOPTODEVICE provides replacement cisco compatible qsfp28 100g aoc active optical cable 20m for large data center deployments.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






