• hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Cisco C55 DWDM‑SFP‑3347‑80 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1533.47nm 80km 100GHz | HYTOPTODEVICE

HYTOPTODEVICE Cisco C55 DWDM-SFP-3347-80 compatible 1.25G 1000BASE-DWDM SFP transceiver, 1533.47nm 100GHz ITU-T grid, 80km long-haul transmission over G.652.D single-mode fiber. TEC wavelength stabilization, plug-and-play design, real-time DDM monitoring and custom EEPROM coding, ideal for metro DWDM expansion and telecom project bulk deployment.
CH Cisco Compatible P/N  CH Cisco Compatible P/N
CH37 DWDM‑SFP‑4772‑80 CH50 DWDM‑SFP‑3740‑80
CH38 DWDM‑SFP‑4692‑80 CH51 DWDM‑SFP‑3661‑80
CH39 DWDM‑SFP‑4612‑80 CH52 DWDM‑SFP‑3582‑80
CH40 DWDM‑SFP‑4532‑80 CH53 DWDM‑SFP‑3504‑80
CH41 DWDM‑SFP‑4453‑80 CH54 DWDM‑SFP‑3425‑80
CH42 DWDM‑SFP‑4373‑80 CH55 DWDM‑SFP‑3347‑80
CH43 DWDM‑SFP‑4294‑80 CH56 DWDM‑SFP‑3268‑80
CH44 DWDM‑SFP‑4214‑80 CH57 DWDM‑SFP‑3190‑80
CH45 DWDM‑SFP‑4135‑80 CH58 DWDM‑SFP‑3112‑80
CH46 DWDM‑SFP‑4056‑80 CH59 DWDM‑SFP‑3033‑80
CH47 DWDM‑SFP‑3977‑80 CH60 DWDM‑SFP‑2955‑80
CH48 DWDM‑SFP‑3898‑80 CH61 DWDM‑SFP‑2877‑80
CH49 DWDM‑SFP‑3819‑80 CH62
Description

Cisco C55 DWDM‑SFP‑3347‑80 Compatible 1.25G DWDM Transceiver Module | 1000BASE‑DWDM 1533.47nm 80km Bulk Wholesale

Product Overview

HYTOPTODEVICE C55 DWDM SFP is a fully functional plug-and-play replacement for Cisco DWDM‑SFP‑3347‑80. It supports 1.25G 1000BASE-DWDM transmission on the standard 100GHz ITU-T grid at 1533.47nm wavelength, delivering stable 80km error-free transmission over G.652.D single-mode fiber. It is a cost-effective upgrade solution for metro DWDM networking, telecom backhaul and enterprise long-distance fiber interconnection.
Adopting TEC-cooled DFB laser chips, this C55 module achieves precise wavelength locking and low channel crosstalk for dense DWDM multiplexing. With ultra-low power consumption below 2W, it supports reliable 24/7 continuous operation. Preloaded Cisco-adaptive EEPROM ensures alarm-free hot-swap deployment. Built-in SFF-8472 DDM enables real-time operational monitoring. We support sample testing and large-volume bulk orders for various telecom and integration projects.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-3347-80 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1533.47nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type PIN
TX Power 0~+5dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤2W Receiver Overload -3.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 10–15 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -3 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a PIN receiver (sensitivity ~ -24 dBm, 24 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Custom Cisco‑specific EEPROM signature eliminates alarms and port lockdown. No extra configuration or firmware upgrade is required for plug‑and‑play deployment across supported Cisco enterprise and carrier‑grade hardware.

Fully Compatible Cisco Platforms:
  • Cisco Catalyst 3850, 9200, 9300 Series enterprise switches
  • Cisco ISR 4000‑series multi‑service branch routers
  • Cisco ASR 1000‑series carrier backbone routers
  • Cisco ONS optical transport platforms supporting 100GHz DWDM SFP
  • All Cisco devices accepting original DWDM‑SFP‑3347‑80 transceivers

2. Multi-Brand Cross Compatibility

Compliant with universal SFP MSA specifications, this C55 DWDM SFP runs error‑free on Huawei, H3C, Juniper, MikroTik and other mainstream network hardware. Custom firmware adaptation is available for complex multi‑vendor DWDM environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

• Metro DWDM Ring: Dedicated C55 wavelength realizes single-fiber multiplexing to reduce carrier fiber investment
• Wireless Cell Backhaul: Passive 80km gigabit connectivity lowers remote site operation expenses
• Enterprise Cross-Branch: Low-cost private fiber for inter-office data & real-time video transmission
• MAN Service Aggregation: Isolated wavelengths avoid service cross-interference and boost network stability
• Industrial IoT Monitoring: Anti-interference optical design for long-distance smart city & factory data links
• Legacy Network Upgrade: Add C-band wavelengths without full infrastructure overhaul

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Work with standard DWDM MUX/DEMUX to aggregate multiple service traffic over single fiber pair, ideal for medium‑reach gigabit DWDM tender projects.



2. 80km Long-Haul DWDM Solution

Pair with EDFA optical amplifiers to compensate fiber signal attenuation, stabilize DWDM signal for carrier‑grade inter‑city backbone links..


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Ultra-low power design reduces power consumption and heat generation. The optimized single-fiber structure simplifies data center cabling, enabling cost-effective and stable gigabit Ethernet transmission.

1G Data Center Connectivity low power single-fiber Gigabit Ethernet DWDM SFP solution


2.
Verified Host Interoperability for Cisco Devices

Calibrated firmware supports zero-alarm plug-and-play for Huawei, Cisco and other mainstream devices. It solves multi-brand compatibility problems and adapts to hybrid network deployment.
Verified multi-vendor interoperability for  Cisco  DWDM SFP transceiver

3.Rigorous Testing, Uncompromising Reliability

Integrating precise wavelength locking, stable 80km long-haul transmission and multi-scenario adaptability, this module forms a complete gigabit DWDM solution. It fully meets diversified networking demands for carrier metro backhaul and enterprise long-distance interconnection.

Comprehensive 1.25G 80km C17 DWDM networking solution for carrier and enterprise deployment


FAQ
 
Q1: Can I reconfigure the module firmware if I upgrade my network devices later?
A: Yes. HYTOPTODEVICE provides free lifelong EEPROM reprogramming for all C55 DWDM modules. We can update module identification data to match your new network hardware for optimal compatibility and equipment reuse.

Q2: How do I pick the correct UPC or APC connector for my DWDM deployment?
A: This C55 module uses standard UPC LC connectors, optimized for metro DWDM multiplexing scenarios. APC connectors apply to high return-loss PON networks. Consult our technical team before switching connector types to avoid link instability.

Q3: Are pre-deployment parameter adjustments or system settings required?
A: No extra configuration is needed. All C55 modules are pre-calibrated and Cisco-compatible out of the box. Hot-swap installation enables immediate stable network operation to shorten on-site construction time.

Q4: What practical methods can I use to validate link performance after installation?
A: You can check real-time DDM optical power data via device CLI or web management interface. You can also conduct BER testing and long-term stability monitoring. Our team provides professional link performance evaluation support.

Q5: Will idle high transmit power cause permanent damage to the transceiver?
A: No. Built-in laser power protection circuit avoids transmitter damage when fiber is disconnected. Please cover unused optical ports with dust caps to prevent contamination and laser exposure risks.

Q6: Can these C55 modules withstand static, dust and humid telecom room conditions?
A: Yes. All C55 modules adopt industrial-grade dustproof, moisture-proof and ESD protection design. Strict environmental testing ensures stable operation in high-density and complex telecom equipment room environments.

Q7: Is the DDM system capable of proactive fault warning before link downtime occurs?
A: Yes. The real-time DDM system continuously monitors optical power, temperature and voltage. It triggers early abnormal warnings to support preventive maintenance and avoid sudden network outages.

Q8: How trustworthy are the real-time DDM optical power measurement results?
A: Every C55 module is precisely factory-calibrated with professional optical instruments. DDM readings maintain high industry accuracy, fully reliable for daily network operation and link status judgment.

Q9: Do I need paid licenses or dedicated tools to access DDM diagnostic data?
A: No licenses or special software are required. The DDM function complies with SFF-8472 international standards. All diagnostic data is accessible through native device CLI or web management interfaces for free.

Q10: What after-sales solutions are provided for DOA or transit-damaged modules?
A: We implement comprehensive pre-shipment testing to reduce defective products. For DOA or transit-damaged units, provide photos and test records. We offer fast free replacement and technical support to guarantee project progress.

Q11: What technical documents are delivered with each module order?
A: Each order includes official datasheets, parameter specifications and qualification certificates. Bulk project customers can obtain factory test reports and compliance documents for bidding and project acceptance.

Q12: Can your engineering team provide professional link budget assessment before purchase?
A: Yes. Our professional optical engineers provide free pre-sales link budget calculation. Provide your actual fiber length, loss parameters and device layout, and we will deliver accurate data and optimized deployment suggestions.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Download