• Cisco C30 DWDM‑SFP‑5333‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1553.33nm 100km 100GHz | HYTOPTODEVICE
  • HYTOPTODEVICE hot pluggable DWDM SFP transceiver module, gigabit network upgrade optical module
  • HYTOPTODEVICE high sensitivity APD DWDM transceiver module, carrier grade long haul optical transceiver
  • HYTOPTODEVICE bulk supply DWDM transceiver module, DDM monitoring gigabit telecom optical module
  • Cisco C30 DWDM‑SFP‑5333‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1553.33nm 100km 100GHz | HYTOPTODEVICE
  • HYTOPTODEVICE hot pluggable DWDM SFP transceiver module, gigabit network upgrade optical module
  • HYTOPTODEVICE high sensitivity APD DWDM transceiver module, carrier grade long haul optical transceiver
  • HYTOPTODEVICE bulk supply DWDM transceiver module, DDM monitoring gigabit telecom optical module

Cisco C44 DWDM‑SFP‑4214‑100 Compatible 1.25G DWDM Fiber Transceiver | 1000BASE-DWDM 1542.14nm 100km 100GHz | HYTOPTODEVICE

Shop proven Cisco C44 compatible 1.25G DWDM fiber transceiver at HYTOPTODEVICE. 1542.14nm 100GHz ITU‑T grid, 100km single‑mode fiber reach, APD high‑sensitivity receiver. Buy bulk DWDM SFP modules for system integrator projects, metro backbone roll‑out and Cisco hardware replacement.
CHANEL Cisco Compatible P/N  CHANEL Cisco Compatible P/N
CH30 DWDM‑SFP‑5333‑100 CH46 DWDM‑SFP‑4056‑100
CH31 DWDM‑SFP‑5252‑100 CH47 DWDM‑SFP‑3977‑100
CH32 DWDM‑SFP‑5172‑100 CH48 DWDM‑SFP‑3898‑100
CH33 DWDM‑SFP‑5092‑100 CH49 DWDM‑SFP‑3819‑100
CH34 DWDM‑SFP‑5012‑100 CH50 DWDM‑SFP‑3740‑100
CH35 DWDM‑SFP‑4932‑100 CH51 DWDM‑SFP‑3661‑100
CH36 DWDM‑SFP‑4851‑100 CH52 DWDM‑SFP‑3582‑100
CH37 DWDM‑SFP‑4772‑100 CH53 DWDM‑SFP‑3504‑100
CH38 DWDM‑SFP‑4692‑100 CH54 DWDM‑SFP‑3425‑100
CH39 DWDM‑SFP‑4612‑100 CH55 DWDM‑SFP‑3347‑100
CH40 DWDM‑SFP‑4532‑100 CH56 DWDM‑SFP‑3268‑100
CH41 DWDM‑SFP‑4453‑100 CH57 DWDM‑SFP‑3190‑100
CH42 DWDM‑SFP‑4373‑100 CH58 DWDM‑SFP‑3112‑100
CH43 DWDM‑SFP‑4294‑100 CH59 DWDM‑SFP‑3033‑100
CH44 DWDM‑SFP‑4214‑100 CH60 DWDM‑SFP‑2955‑100
CH45 DWDM‑SFP‑4135‑100 CH61 DWDM‑SFP‑2877‑100
Description

Cisco C44 DWDM‑SFP‑4214‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1542.14nm 100km 100GHz | HYTOPTODEVICE

Product Overview
HYTOPTODEVICE C44 DWDM SFP fiber transceiver is a direct drop‑in replacement for Cisco DWDM‑SFP‑4214‑100. Tuned to 1542.14nm within the 100GHz ITU‑T grid, this 1.25G fiber transceiver delivers robust error‑free transmission up to 100km over G.652.D single‑mode fiber. Well‑suited for network operators, system integrators and enterprise buyers, this fiber transceiver supports DWDM channel expansion and end‑of‑life network hardware renewal.
This carrier‑grade fiber transceiver integrates TEC‑stabilized DFB laser and high‑gain APD receiver, ensuring precise wavelength performance and low crosstalk inside dense DWDM multiplexing environments. Power consumption remains below 2W to minimize thermal stress and ongoing operational expenses. Pre‑programmed EEPROM guarantees alarm‑free hot‑swap insertion. Built‑in DDM provides real‑time optical monitoring. Every fiber transceiver undergoes calibration and full aging test prior to shipment, supporting sample validation and large‑volume procurement for global customers.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-4214-100 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1542.14nm Max  Distance 100KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type APD
TX Power 0~+5dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤2W Receiver Overload -9.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 15–20 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -9 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a APD receiver (sensitivity ~ -32dBm,32 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
This C44 DWDM transceiver module runs with zero alarms and full firmware adaptation on the following Cisco hardware platforms:
  • Cisco Catalyst 2960 / 3560 / 3750 / 3850 / 9200 / 9300 Series Switches
  • Cisco ISR 1900 / 2900 / 3900 Series Integrated Service Routers
  • Cisco ASR 1000 Series Aggregation Service Routers
  • Cisco ONS 15454 / 15310 Optical Transport Platforms
  • Cisco ME 3400 / 3600 / 3800 Metro Ethernet Switches

2. Multi-Brand Cross Compatibility

This DWDM transceiver module complies with MSA standards and passes full interoperability tests. It runs stably on mainstream multi-brand network devices with no packet loss or link flapping.
  • Huawei AR / CE / S Series Switches & Routers
  • H3C S / ER / MSR Series Network Devices
  • Juniper EX / MX Series Routing & Switching Platforms
  • ZTE, MikroTik, TP-Link Enterprise-Grade Network Equipment

3. Free Value-Added Services

We offer exclusive free value-added services for all C44 DWDM transceiver modules to reduce your project deployment and maintenance costs.
  • Free custom EEPROM programming for special and legacy network environments
  • Lifelong free firmware refitting and version upgrade
  • Free pre-sales link budget calculation and loss evaluation
  • Free batch testing report and product qualification documents

Primary Application Scenarios

  • 100km long-haul metro DWDM network construction and fiber capacity expansion
  • Telecom base station backhaul and long-distance gigabit optical transmission
  • Cross-city private network interconnection for enterprises and operators
  • Multi-service signal aggregation with 100GHz DWDM MUX/DEMUX devices
  • Smart city and industrial long-distance optical link deployment
  • Existing DWDM network wavelength expansion and old module replacement

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Pair this DWDM transceiver module with 100GHz MUX/DEMUX to aggregate multiple services on one fiber pair. It saves fiber resources and simplifies wiring for metro DWDM deployment.

HYTOPTODEVICE DWDM fiber connectivity solution, multi‑service network aggregation solution

2. 100km Long-Haul DWDM Solution

Match the transceiver module with EDFA amplifiers to compensate fiber attenuation, stabilize optical signals and eliminate long-distance distortion, ensuring reliable 100km backbone transmission.

HYTOPTODEVICE long haul optical transmission solution, EDFA amplified DWDM network deployment


The Core Feature

1. Low-Power Data Center Efficient Connectivity

This DWDM transceiver module consumes less than 2W power, reducing equipment heat and energy loss. It supports stable, energy-efficient long-distance interconnection for data centers and metro backbone networks.

HYTOPTODEVICE low power DWDM transceiver module, energy efficient data center network connectivity


2.
Verified Host Interoperability for Cisco Devices

Pre-programmed firmware ensures full multi-brand compatibility. Hot-swap plug-and-play design realizes zero-alarm and zero-configuration deployment without link conflicts.
HYTOPTODEVICE multi‑brand compatible optical transceiver, fully verified network host interoperability

3.Rigorous Testing, Uncompromising Reliability

Every transceiver module undergoes strict factory calibration, wavelength inspection, crosstalk test and 72-hour aging screening. Rigorous testing guarantees stable batch performance for bulk projects.

HYTOPTODEVICE full tested carrier grade transceiver module, high stability long haul optical equipment


FAQ

Q1: Can this C44 fiber transceiver work with older Cisco and legacy network hardware?
A: Yes. Tuned EEPROM ensures solid compatibility for most legacy devices. We can customize firmware for extra‑old hardware upon purchasing request.

Q2: Can I re‑program the fiber transceiver after upgrading my network equipment?
A: Absolutely. Free EEPROM re‑flashing removes vendor‑lock limitations. Our 24‑hour engineering team completes re‑coding for purchased units.

Q3: Which connector type suits DWDM long‑haul fiber transceiver links?
A: UPC is standard for 1000BASE‑DWDM fiber transceiver deployment. APC is primarily intended for PON systems. Avoid mixing connector polish types to prevent unexpected signal degradation.

Q4: What is the minimum fiber span without an optical attenuator for this fiber transceiver?
A: A minimum 10‑15km G.652.D fiber span is recommended. This prevents APD receiver saturation caused by ultra‑short direct fiber connections.

Q5: How do I fix excessive received optical power on this fiber transceiver?
A: Install a fixed‑value optical attenuator on the receive port to bring power back into working range and protect the APD receiver component.

Q6: Does this DWDM fiber transceiver include built‑in surge and static protection?
A: Yes. Integrated overcurrent, overvoltage and ESD protection safeguards laser and receiver chips against power fluctuations inside equipment rooms.

Q7: Why is thermal control critical for DWDM fiber transceiver wavelength stability?
A: On‑board TEC hardware locks laser wavelength tightly to the 100GHz ITU‑T grid. Proper thermal management avoids wavelength drift and adjacent‑channel crosstalk.

Q8: Can DDM send early alerts before fiber transceiver link failure?
A: Yes. Real‑time tracking of optical power, temperature and supply voltage generates threshold alerts, enabling preventive maintenance before service outages.
Q9: How are fiber transceiver units handled for bulk‑order shipping?
A: Each fiber transceiver comes with dust cap, individually packed inside anti‑static bag and shock‑resistant tray to protect optical end‑faces during transit.

Q10: What supporting documents can I obtain when I buy this fiber transceiver for bidding projects?
A: Standard datasheet is included with every order. Bulk‑procurement customers can receive batch test reports and compliance certificates for project acceptance.

Q11: Do you offer post‑purchase troubleshooting support for fiber transceiver units?
A: 24‑hour engineering support is available. We assist with link debugging, compatibility tuning and deployment optimization for purchased hardware.

Q12: Can I order sample fiber transceiver units for pre‑purchase lab testing?
A: Samples are available for evaluation before formal bulk procurement. Test performance in lab or field environments to confirm fit for your network.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • Cisco C30 DWDM‑SFP‑5333‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1553.33nm 100km 100GHz | HYTOPTODEVICE
  • HYTOPTODEVICE hot pluggable DWDM SFP transceiver module, gigabit network upgrade optical module
  • HYTOPTODEVICE high sensitivity APD DWDM transceiver module, carrier grade long haul optical transceiver
  • HYTOPTODEVICE bulk supply DWDM transceiver module, DDM monitoring gigabit telecom optical module

Download