• hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Cisco C42 DWDM‑SFP‑4373‑80 Compatible 1.25G DWDM SFP Transceiver Module | 1000BASE-DWDM 1543.73nm 80km 100GHz | HYTOPTODEVICE

Carrier‑grade Cisco DWDM‑SFP‑4373‑80 compatible DWDM SFP optic, adhering to 100GHz ITU‑T grid at 1543.73nm for 80km single‑mode fiber transmission. Featuring TEC‑cooled DFB laser and comprehensive DDM monitoring, runs seamlessly on Cisco gear without error alerts, ideal for dense metro DWDM and long‑reach remote site backhaul deployments.
CH Cisco Compatible P/N  CH Cisco Compatible P/N
CH37 DWDM‑SFP‑4772‑80 CH50 DWDM‑SFP‑3740‑80
CH38 DWDM‑SFP‑4692‑80 CH51 DWDM‑SFP‑3661‑80
CH39 DWDM‑SFP‑4612‑80 CH52 DWDM‑SFP‑3582‑80
CH40 DWDM‑SFP‑4532‑80 CH53 DWDM‑SFP‑3504‑80
CH41 DWDM‑SFP‑4453‑80 CH54 DWDM‑SFP‑3425‑80
CH42 DWDM‑SFP‑4373‑80 CH55 DWDM‑SFP‑3347‑80
CH43 DWDM‑SFP‑4294‑80 CH56 DWDM‑SFP‑3268‑80
CH44 DWDM‑SFP‑4214‑80 CH57 DWDM‑SFP‑3190‑80
CH45 DWDM‑SFP‑4135‑80 CH58 DWDM‑SFP‑3112‑80
CH46 DWDM‑SFP‑4056‑80 CH59 DWDM‑SFP‑3033‑80
CH47 DWDM‑SFP‑3977‑80 CH60 DWDM‑SFP‑2955‑80
CH48 DWDM‑SFP‑3898‑80 CH61 DWDM‑SFP‑2877‑80
CH49 DWDM‑SFP‑3819‑80 CH62
Description

Cisco C42 DWDM‑SFP‑4373‑80 Compatible 1.25G DWDM SFP Transceiver Module | 1000BASE‑DWDM 1543.73nm 80km Bulk Wholesale

Product Overview

HYTOPTODEVICE C42 DWDM SFP serves as pin‑to‑pin functional replacement for Cisco DWDM‑SFP‑4373‑80, following 100GHz ITU‑T C‑band grid with central wavelength of 1543.73nm. It delivers error‑free 80km signal transmission over G.652.D single‑mode fiber for high‑density DWDM transport infrastructures.
Equipped with TEC‑stabilized DFB laser core, this module achieves strict wavelength accuracy to lower inter‑channel interference in multiplexed systems, while power consumption remains below 2W under full‑load operation. Pre‑configured Cisco‑profile EEPROM eliminates unrecognized‑transceiver warning pop‑ups. Hot‑swap capability plus full SFF‑8472 DDM monitoring simplifies on‑site maintenance and real‑time fault diagnosis for metro ring architectures and geographically scattered remote backhaul links.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-4373-80 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1543.73nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type PIN
TX Power 0~+5dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤2W Receiver Overload -3.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 10–15 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -3 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a PIN receiver (sensitivity ~ -24 dBm, 24 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Custom Cisco‑specific EEPROM signature eliminates alarms and port lockdown. No extra configuration or firmware upgrade is required for plug‑and‑play deployment across supported Cisco enterprise and carrier‑grade hardware.

Fully Compatible Cisco Platforms:
  • Cisco Catalyst 3850, 9200, 9300 Series enterprise switches
  • Cisco ISR 4000‑series multi‑service branch routers
  • Cisco ASR 1000‑series carrier backbone routers
  • Cisco ONS optical transport platforms supporting 100GHz DWDM SFP
  • All Cisco devices accepting original DWDM‑SFP‑4373‑80 transceivers

2. Multi-Brand Cross Compatibility

Compliant with universal SFP MSA specifications, this C42 DWDM SFP runs error‑free on Huawei, H3C, Juniper, MikroTik and other mainstream network hardware. Custom firmware adaptation is available for complex multi‑vendor DWDM environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

• Metro DWDM Ring: Dedicated C42 wavelength realizes single-fiber multiplexing to reduce carrier fiber investment
• Wireless Cell Backhaul: Passive 80km gigabit connectivity lowers remote site operation expenses
• Enterprise Cross-Branch: Low-cost private fiber for inter-office data & real-time video transmission
• MAN Service Aggregation: Isolated wavelengths avoid service cross-interference and boost network stability
• Industrial IoT Monitoring: Anti-interference optical design for long-distance smart city & factory data links
• Legacy Network Upgrade: Add C-band wavelengths without full infrastructure overhaul

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Pair C42 module with standard DWDM multiplexers & demultiplexers to carry multi-service signals on single fiber, simplify field wiring for medium-short gigabit spans.



2. 80km Long-Haul DWDM Solution

Match EDFA optical amplifiers to offset natural fiber attenuation, stabilizing DWDM signal for intercity carrier core backhaul networks.


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Ultra-low power design reduces power consumption and heat generation. The optimized single-fiber structure simplifies data center cabling, enabling cost-effective and stable gigabit Ethernet transmission.

1G Data Center Connectivity low power single-fiber Gigabit Ethernet DWDM SFP solution


2.
Verified Host Interoperability for Cisco Devices

Calibrated firmware supports zero-alarm plug-and-play for Huawei, Cisco and other mainstream devices. It solves multi-brand compatibility problems and adapts to hybrid network deployment.
Verified multi-vendor interoperability for  Cisco  DWDM SFP transceiver

3.Rigorous Testing, Uncompromising Reliability

Integrating precise wavelength locking, stable 80km long-haul transmission and multi-scenario adaptability, this module forms a complete gigabit DWDM solution. It fully meets diversified networking demands for carrier metro backhaul and enterprise long-distance interconnection.

Comprehensive 1.25G 80km C17 DWDM networking solution for carrier and enterprise deployment


FAQ

Q1: Will implementing third‑party compatible optical modules nullify the original manufacturer warranty of my network equipment?
A: For most global commercial regions, MSA‑compliant compatible optics will not void host‑device warranty. If your network hardware enforces rigid OEM identification lock‑in, our free EEPROM configuration can suppress alert prompts and avoid warranty‑related disputes. Contact our support team for territory‑specific practical advice.

Q2: Can you rework module firmware for end‑of‑life or application‑specific networking hardware?
A: Our engineering team provides custom EEPROM re‑flash for niche switches, discontinued transport platforms and industry‑oriented communication gear. Submit your exact hardware model details, and we deliver tailored configuration within one working day with round‑the‑clock technical support access.

Q3: Does this C42 DWDM SFP comply with Multi‑Source Agreement industry specifications?
A: Each C42 unit strictly observes SFP MSA mechanical, electrical and optical criteria and supports full SFF‑8472 DDM diagnostic functions. Physical dimensions, pin assignments and optical performance follow universal industry standards to deliver reliable cross‑device interoperability.

Q4: What total link loss budget can this 1543.73nm DWDM SFP offer?
A: This transceiver features 24dB overall link budget calculated on its 0~+5dBm transmit output and ‑24dBm receiving sensitivity, supporting full‑range 80km transmission over standard single‑mode fiber under typical attenuation conditions.

Q5: How does the transceiver retain accurate ITU‑T wavelength performance after long‑time continuous running?
A: On‑board TEC thermoelectric elements dynamically stabilize laser chip temperature alongside factory wavelength calibration procedures. This mechanism suppresses long‑term wavelength drift and preserves strict 100GHz channel spacing over thousands of operating hours.

Q6: Could accumulated insertion loss from DWDM multiplexer hardware trigger complete fiber link outages?
A: The built‑in 24dB link margin tolerates ordinary insertion loss generated by MUX/DEMUX assemblies. When combined attenuation from fiber, splices and WDM parts exceeds budget limits, EDFA amplifiers can restore signal power level.

Q7: What is the minimum allowed fiber span when no optical attenuator is fitted?
A: For this 80km‑rated DWDM transceiver, safe unattenuated minimum fiber distance is 15 km. Any shorter cabling must adopt a 10‑15 dBm fixed attenuator to prevent receiver optical saturation and irreversible port damage.

Q8: Are electrical surge‑protection circuits built inside the C42 optical transceiver?
A: Integrated protective circuits shield laser and receiver chips against over‑voltage, over‑current and ESD transients occurring during hot‑swap insertion, boosting hardware reliability in high‑density rack environments.

Q9: Why is active thermal control essential for wavelength‑locking inside dense DWDM channel systems?
A: Laser emission wavelength shifts noticeably with temperature fluctuation. Embedded TEC adjusts laser working temperature in real‑time to lock to the 1543.73nm ITU‑T channel and reduce crosstalk among tightly‑spaced DWDM wavelengths.

Q10: What adverse impacts emerge if the module operates above its maximum rated temperature ceiling?
A: Extended overheating causes wavelength offset, higher bit‑error rates and fluctuating DDM measurement values. Long‑term high‑temperature exposure accelerates laser aging. For hot‑site deployments, utilize rack cooling facilities or opt for our industrial wide‑temperature version.

Q11: What approaches let network operators retrieve real‑time DDM diagnostic readings on managed switches?
A: Live metrics covering transmit power, receive power, module temperature and supply voltage can be obtained via native switch CLI transceiver commands or web‑based management dashboards; no extra third‑party software installation is needed.

Q12: What packaging safeguards defend fiber connector surfaces during international transportation?
A: Every C42 transceiver is fitted LC dust caps after full optical performance testing, then individually sealed in anti‑static moisture‑resistant bags with shock‑absorbing foam padding, protecting fiber end‑faces from scratches, dust and oil contamination throughout shipment and handling.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Download