• hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Cisco C37 DWDM‑SFP‑4772‑80 Compatible 1.25G DWDM SFP Transceiver Module | 1000BASE-DWDM 1547.72nm 80km 100GHz | HYTOPTODEVICE

Cost-efficient Cisco replacement SFP module with 100GHz 1547.72nm wavelength, supporting 80km single-mode transmission. Equipped with TEC DML laser and full DDM monitoring, works seamlessly on Cisco gear without compatibility alarms for metro and cell backhaul fiber networks.
CH Cisco Compatible P/N  CH Cisco Compatible P/N
CH37 DWDM‑SFP‑4772‑80 CH50 DWDM‑SFP‑3740‑80
CH38 DWDM‑SFP‑4692‑80 CH51 DWDM‑SFP‑3661‑80
CH39 DWDM‑SFP‑4612‑80 CH52 DWDM‑SFP‑3582‑80
CH40 DWDM‑SFP‑4532‑80 CH53 DWDM‑SFP‑3504‑80
CH41 DWDM‑SFP‑4453‑80 CH54 DWDM‑SFP‑3425‑80
CH42 DWDM‑SFP‑4373‑80 CH55 DWDM‑SFP‑3347‑80
CH43 DWDM‑SFP‑4294‑80 CH56 DWDM‑SFP‑3268‑80
CH44 DWDM‑SFP‑4214‑80 CH57 DWDM‑SFP‑3190‑80
CH45 DWDM‑SFP‑4135‑80 CH58 DWDM‑SFP‑3112‑80
CH46 DWDM‑SFP‑4056‑80 CH59 DWDM‑SFP‑3033‑80
CH47 DWDM‑SFP‑3977‑80 CH60 DWDM‑SFP‑2955‑80
CH48 DWDM‑SFP‑3898‑80 CH61 DWDM‑SFP‑2877‑80
CH49 DWDM‑SFP‑3819‑80 CH62
Description

Cisco C37 DWDM‑SFP‑4772‑80 Compatible 1.25G DWDM SFP Transceiver Module | 1000BASE‑DWDM 1547.72nm 80km Bulk Wholesale

Product Overview

HYTOPTODEVICE C37 DWDM SFP serves as fully interchangeable drop-in substitute for Cisco DWDM‑SFP‑4772‑80, built on standardized 100GHz ITU-T C-band grid at 1547.72nm. It delivers consistent error-free transmission up to 80km over G.652.D single-mode fiber for dense wavelength multiplex infrastructures.
The module integrates industrial TEC-cooled DML laser paired with APD receiver to stabilize wavelength and minimize adjacent channel interference, with overall power draw kept below 2W for round-the-clock full-load running. Factory pre-programmed EEPROM erases "unrecognized transceiver" pop-ups on Cisco equipment, alongside hot-swap capability and SFF-8472 compliant real-time DDM diagnostics to simplify maintenance for metro optical rings and remote cellular backhaul links.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-4772-80 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1547.72nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DWDM DML (Cooled)
Cable Type SMF Receiver Type APD
TX Power 0~+4dBm Receiver Sensitivity < -30.0dBm
Power Consumption ≤2W Receiver Overload -8.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +4 dBm, install a 15–20 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -8 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DML (TEC) transmitter and a APD receiver (sensitivity -30 dBm, 30 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Custom Cisco‑specific EEPROM signature eliminates alarms and port lockdown. No extra configuration or firmware upgrade is required for plug‑and‑play deployment across supported Cisco enterprise and carrier‑grade hardware.

Fully Compatible Cisco Platforms:
  • Cisco Catalyst 3850, 9200, 9300 Series enterprise switches
  • Cisco ISR 4000‑series multi‑service branch routers
  • Cisco ASR 1000‑series carrier backbone routers
  • Cisco ONS optical transport platforms supporting 100GHz DWDM SFP
  • All Cisco devices accepting original DWDM‑SFP‑4772‑80 transceivers

2. Multi-Brand Cross Compatibility

Compliant with universal SFP MSA specifications, this C37 DWDM SFP runs error‑free on Huawei, H3C, Juniper, MikroTik and other mainstream network hardware. Custom firmware adaptation is available for complex multi‑vendor DWDM environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

• Metro DWDM Ring: Dedicated C37 wavelength realizes single-fiber multiplexing to reduce carrier fiber investment
• Wireless Cell Backhaul: Passive 80km gigabit connectivity lowers remote site operation expenses
• Enterprise Cross-Branch: Low-cost private fiber for inter-office data & real-time video transmission
• MAN Service Aggregation: Isolated wavelengths avoid service cross-interference and boost network stability
• Industrial IoT Monitoring: Anti-interference optical design for long-distance smart city & factory data links
• Legacy Network Upgrade: Add C-band wavelengths without full infrastructure overhaul

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution



2. 80km Long-Haul DWDM Solution


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Ultra-low power design reduces power consumption and heat generation. The optimized single-fiber structure simplifies data center cabling, enabling cost-effective and stable gigabit Ethernet transmission.

1G Data Center Connectivity low power single-fiber Gigabit Ethernet DWDM SFP solution


2.
Verified Host Interoperability for Cisco Devices

Calibrated firmware supports zero-alarm plug-and-play for Huawei, Cisco and other mainstream devices. It solves multi-brand compatibility problems and adapts to hybrid network deployment.
Verified multi-vendor interoperability for  Cisco  DWDM SFP transceiver

3.Rigorous Testing, Uncompromising Reliability

Integrating precise wavelength locking, stable 80km long-haul transmission and multi-scenario adaptability, this module forms a complete gigabit DWDM solution. It fully meets diversified networking demands for carrier metro backhaul and enterprise long-distance interconnection.

Comprehensive 1.25G 80km C17 DWDM networking solution for carrier and enterprise deployment


FAQ

Q1: Will deploying third-party compatible optical modules void my network hardware manufacturer’s warranty?
A: Under most regional commercial trade regulations, MSA-compliant compatible transceivers do not invalidate host equipment warranties. If your hardware enforces strict OEM recognition locks, our free custom EEPROM coding service can eliminate warning prompts to avoid maintenance disputes. Reach out to our team for location-specific guidance.

Q2: Can you provide customized EEPROM re-flashing for rare industrial or legacy network hardware?
A: Our engineering department delivers bespoke firmware re-coding for niche switches, legacy transport gear and custom industrial communication devices. Submit your exact hardware model details, and we will supply a complete targeted technical solution within one working day with round-the-clock support access.

Q3: Are all C37 DWDM optical modules fully aligned with global Multi-Source Agreement standards?
A: Every C37 SFP adheres strictly to official SFP MSA mechanical, electrical and optical specifications, alongside full SFF-8472 DDM diagnostic compliance. Form factor dimensions, pin assignments and signal characteristics match universal industry standards for seamless cross-hardware interchangeability.

Q4: What total optical loss margin (link budget) does this 1547.72nm DWDM transceiver support?
A: This unit features a 24dB total link budget, calculated from its 0~+5dBm transmit power and -24dBm receiver sensitivity, supporting the full 80km transmission distance over standard single-mode fiber under typical attenuation values.

Q5: How is consistent ITU wavelength accuracy sustained over years of continuous module operation?
A: Integrated thermoelectric cooling (TEC) hardware dynamically stabilizes the laser chip temperature, paired with factory-grade wavelength calibration procedures. This design suppresses long-term wavelength drift and maintains tight 100GHz channel spacing without performance degradation.

Q6: Can cumulative insertion loss from DWDM MUX/DEMUX hardware trigger complete fiber link outages?
A: The module’s built-in 24dB loss margin absorbs standard signal attenuation from multiplexers without failure. When combined loss from fiber, splices and WDM components exceeds the budget, EDFA optical amplifiers can be deployed to recover signal strength.

Q7: What is the minimum fiber span length that can be used without an optical attenuator?
A: The safe unattenuated minimum fiber distance for this 80km DWDM transceiver stands at 15km. Any shorter cabling must use a 10–15dBm fixed attenuator to avoid receiver signal saturation and permanent port damage.

Q8: Does this C37 module integrate built-in protection against voltage surges and excess current?
A: Specialized internal protective circuits are embedded to counter overvoltage, overcurrent and ESD spikes during hot-swap insertion, fully shielding the laser and receiver chips from accidental electrical damage in rack environments.

Q9: How does built-in thermal regulation impact DWDM wavelength locking performance?
A: Laser wavelength shifts significantly with temperature fluctuations. The embedded TEC system continuously adjusts operating temperature to lock the module to the 1547.72nm ITU channel and suppress cross-channel signal interference in dense multiplex systems.

Q10: What performance risks arise if the transceiver operates above its rated temperature ceiling?
A: Sustained overheating causes wavelength deviation, elevated bit error rates and unstable DDM readouts. Long-term high-temperature exposure accelerates laser aging; rack cooling equipment or industrial wide-temperature transceivers are recommended for hot deployment sites.

Q11: What methods exist to view live DDM diagnostic metrics on managed network switches?
A: Real-time DDM data including transmit power, receive power, module temperature and supply voltage can be retrieved via standard switch CLI transceiver commands or built-in web management dashboards, requiring no extra third-party software installation.

Q12: What packaging safeguards prevent fiber end-face dirt and scratches during transit?
A: Each C37 module is fitted protective LC dust caps after full optical inspection, then individually sealed in anti-static, moisture-proof bags with shock-absorbent foam padding to eliminate connector contamination and physical damage during shipping and handling.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Download